Low Voltage Module Test Engineer Job at ALSO (Palo Alto)

Power Conversion and Distribution System Lead

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

172800.00 - 227600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Experience in developing electrical power conversion and distribution system architectures, requirements and specifications, validation and verification
Solid knowledge and hands-on experience on integrating the power electronics and control modules into the electrical system
Understand traditional and modern power electronics technologies including (not limited to): DC-DC and AC-DC/DC-AC power electronics topologies
Familiarity with both wide-band-gap and silicon power semiconductor devices, passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system design and hardware integration
Master of all types of lab instruments: oscilloscope, power supplies, electronics loads, function generators, network analyzer, EMC analyzers etc.
Excellent organizational, communication and writing skills

Job Responsibility

Define the architecture of aircraft high voltage to low voltage power conversion and low voltage distribution system, including power electronics converters, batteries, power distribution units, circuit breaker units, and interfaces to avionics equipment for aircraft platforms
Perform key technical trade-offs for power conversion and distribution system to meet the aircraft function and safety requirements and optimize system performance such as weight and cost
Define system development roadmap and strategy to meet the program schedule and requirements, and perform make vs buy studies and decisions on key system components/modules
Lead electrical load analysis for the system, define and optimize the power budgets
Create power conversion and distribution system requirements, flow down the aircraft requirements to the system requirements, and define key features and characteristics of the electrical system
Collaborate with the cross-functional teams to define the requirements for system modules and boards, and lead the validation and verification of requirements
Lead the electrical system safety and reliability analysis, and support aircraft level and module level safety and reliability analysis
Lead integration of power conversion and distribution system and modules into the aircraft platforms, plan the module acceptance tests, integration tests, safety of flight tests and review and approve test results
Support airborne power conversion and distribution modules design, development and test based on the aircraft and electrical system requirements, system architecture and design standards established

Fulltime

Manager, Electrical Engineering

The Manager, Electrical Engineering, leads the design, development, and implemen...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical, Mechanical, or Aerospace Engineering
10+ Years of Engineering Experience
High-voltage power electronics design, including AC/DC and DC/DC converters and battery systems
Low- and high-voltage wiring harness design
Electrical hardware architecture and circuit design for electromechanical systems
Knowledge of and compliance with applicable electrical and safety standards
Experience with real-time control systems, including PLCs and microcontrollers
Systems engineering and structured product development processes
Electrical hardware design, optimization, and cost reduction
Prototyping, testing, and validation using tools such as FMEA and DVP&R

Job Responsibility

Lead the electrical engineering team in the design and development of the KARNO generator systems, ensuring effective integration of mechanical, electromechanical, and control elements
Oversee the design and execution of electrical hardware, control modules, and system-level solutions, ensuring a cohesive and integrated development approach
Integrate electrical and control modules into final products and collaborate with suppliers to ensure compliance with quality, performance, and safety requirements
Define electrical design requirements and technical best practices
ensuring both electrical and control components align with industry standards for hybrid power generation
Translate system requirements into system- and sub-system specifications for electrical, mechanical, and control components, supporting seamless integration across industrial and commercial applications
Provide coaching and leadership across engineering and operations teams, fostering a collaborative, innovative, and high-performing work environment
Ensure compliance with applicable safety and regulatory standards for electrical systems used in hybrid generator products
Collaborate closely with project managers and cross-functional teams—including mechanical, electrical, control, and supply chain—to meet project milestones and deliverables
Lead technical issue resolution at the hardware and component level, organizing troubleshooting efforts, conducting root cause analysis, and implementing corrective actions to improve system reliability

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Staff Electrical Engineer - Actuators

Archer is seeking a Staff Electrical Engineer- Actuators to lead the architectur...

Location

United States , San Jose

Salary:

160000.00 - 217000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Sound knowledge and hands-on experience in traditional and modern power electronic technologies including: Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system architecture design and hardware integration
Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
Motor control and commutation methods for various types of three phase motors
Microcontrollers and processors
Sensor technology and implementation
Gate drive design for wide bandgap devices (SiC and GaN)

Job Responsibility

Design and develop fault tolerant and high power density actuator controller including motor drivers, sensors, power stages, and embedded control interfaces
Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
Passive component design and optimization in power electronics systems
EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
Lead new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
Requirements capture, topology trade-study and performance modeling
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to verify functional and performance specifications

Fulltime

Staff Power Electronics Engineer- Inverter

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

162000.00 - 222000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to): Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system architecture design and hardware integration
Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
Motor control and commutation methods for various types of three phase motors
Microcontrollers and processors
Sensor technology and implementation
Gate drive design for wide bandgap devices (SiC and GaN)

Job Responsibility

Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
Passive component design and optimization in power electronics systems
EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
Lead new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
Requirements capture, topology trade-study and performance modeling
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to verify functional and performance specifications

Fulltime

Non-Volatile Memory (NVM) Design Engineer, Staff

Synopsys software engineers are key enablers in the world of Electronic Design A...

Location

Taiwan , Hsinchu

Salary:

Not provided

Synopsis Engineering

Expiration Date

Until further notice

Requirements

5–12+ years of industry experience in circuit design, with a strong emphasis on analog circuit design and analysis
memory design experience is a significant plus
Deep understanding of layout considerations for advanced nodes, including parasitic effects, matching techniques, and signal integrity
Expertise in electrical problem-solving, including root cause analysis of circuit failures and development of effective solutions
Hands-on experience with TestChip tapeout flows, silicon debugging (FIB, micro-probing, post-layout RC extraction), and statistical design methodologies (e.g., Monte-Carlo analysis)
Strong transistor-level analog design skills, including sense-amplifier, charge pump, high voltage regulator, and bandgap reference circuit design
Proficiency with circuit simulation tools (HSIM, HSPICE, etc.) and custom schematic/layout editors (e.g., Custom Compiler)
Experience with low power design, power management circuitry, and FinFET design is a plus
A collaborative team player who thrives in multicultural, cross-functional teams
Independent, self-motivated, and able to manage multiple priorities in a fast-paced environment

Job Responsibility

Leading the NVM TestChip and IP design flow across multiple technologies and foundries, ensuring robust and scalable solutions for diverse applications
Architecting, designing, and verifying CMOS-based non-volatile memory IP modules, from concept to production tapeout
Collaborating with product engineers to perform silicon verification, in-depth testing, and debugging to validate IP performance on silicon
Conducting post-layout extraction, simulation, and comprehensive testing in conjunction with silicon validation teams
Working closely with on-site and off-site design, layout, and CAD teams to optimize design methodologies and ensure project success
Partnering with layout designers on floor planning of memory arrays and analog blocks for performance, area, and manufacturability optimization
Serving as the technical expert to support Sales and Application Engineers during complex pre- and post-sales customer engagements, ensuring customer satisfaction and successful product adoption

What we offer

Comprehensive medical and healthcare plans that work for you and your family
In addition to company holidays, we have ETO and FTO Programs
Maternity and paternity leave, parenting resources, adoption and surrogacy assistance, and more
Purchase Synopsys common stock at a 15% discount, with a 24 month look-back
Save for your future with our retirement plans that vary by region and country
Competitive salaries

Fulltime

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Sound knowledge and hands-on experience in traditional and modern power electronic technologies
Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
Inverter technology for variable speed motor drive, including topologies and PWM techniques
Familiarity with both wide-band-gap and silicon power semiconductor devices
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
Power electronics system architecture design and hardware integration
Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)

Job Responsibility

Design and build high voltage, high power density power electronics converter products for eVTOL applications
Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
Leads new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
Design electronic power supply and sensing circuits
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to determine if the design meets functional and performance specifications
Troubleshoot and help root cause any issues that occur in the prototype line

Fulltime

Power Electronics Engineer-Automotive

Vicor is seeking a highly motivated and skilled Power Electronics Engineer for i...

Location

United States , Andover

Salary:

105000.00 - 130000.00 USD / Year

Vicor Corp.

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Power Electronics, or a related field
Minimum of 3+ years of experience in power electronics engineering, preferably involving Automotive or Electric Vehicle (EV) power systems and high-voltage DC/DC solutions
Design, analysis, and hands-on validation of power electronics systems using Vicor Modules
Expertise in power management and the application of high-voltage and bi-directional DC/DC converter topologies
Proficiency in multi-layer PCB design techniques
Familiarity with industry EMI standards and test methods
Experience designing, troubleshooting and testing filters for compliance including magnetics design and high frequency low noise PCB layout
Proficiency in power electronics design and simulation software, such as LTspice, SIMPLIS, Altium, Power DC/Power SI or similar tools
Ability to effectively present complex technical topics to internal and external audiences of different backgrounds

Job Responsibility

Strategic Product Definition: Collaborate proactively with engineering team and field application team to ensure product specifications are aligned with evolving customer needs and market opportunities
NPI Process Support: Lead new product development activities, guiding products through the entire NPI process from concept to Release-to-Production (RTP)
System Validation: Develop system test boards, comprehensive test plans, bench automation, and test results documentation to support system verification
System Design: Provide technical support for the design, development, and implementation of power electronics solutions across the automotive portfolio
Customer Design and Integration: Serve as a technical resource between Vicor and its strategic automotive customers
Model and Tool Development: Define and assist to develop state of the art models and tools to help customers select, design, and optimize their power solutions using Vicor Modules
Market Readiness: Develop and deliver all technical collateral, including datasheets, user guide, reference designs, and application notes, necessary for a successful product launch
Technical Training: Develop and deliver technical training material on new products and systems to Field Application Engineers (FAEs) and global sales teams
Collaboration: Partner closely with Sales, Marketing, and Engineering teams to ensure seamless project execution and maximum customer satisfaction

New

Project Controls Coordinator III

Under the direction of the Supervisor Project Controls, the Analyst will perform...

Location

Canada , North York

Salary:

55.00 - 58.00 CAD / Hour

Randstad

Expiration Date

June 03, 2026

Requirements

Four Year Degree or combination of education and related experience
Minimum of 5 years of Project Controls or Project Management experience
Project Management professional designation is preferred
Experienced analytical skills including Earned Value Management
An independent worker within a team setting
Demonstrated professional engagement at a high level with work group, stakeholders, and contractors in a team setting
Proficient in the use of SAP, Oracle and MS office suite, intermediate+ Excel skills
Excellent communication, interpersonal, and organizational skills
Ability to effectively manage and prioritize workload, bring issues forward and develop working relationships at all levels of the organization
Detail oriented and understands the importance of data reconciliation

Job Responsibility

Analyze and maintain the project costs at the WBS level including control budget, incurred costs, commitments, and forecast
Provide the project team with accurate and timely cost information and reporting
Perform earned value measurements to anticipate forecast impacts
Perform monthly project close processes and prepare monthly project reports and comparative capital cost estimates for the project in Excel and EcoSys
Prepare and document project change orders timely in accordance with Project Management Office standards
Engage the Project Managers in meetings and discussions to review and reforecast project costs
Review cost transactions to ensure accurate project costs
Communicate with larger Controls team for the project
Liaise with Project Managers and Field Cost Analysts to ensure engagement with the project progress, changes, highlights and issues
Maintain the project Work Breakdown Structure such that it facilitates project execution and cost control during project execution and meets accounting requirements for asset creation and project closeout

Fulltime

Low Voltage Module Test Engineer

ALSO

Location:
United States , Palo Alto

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Low Voltage Module Test Engineer