Line Avionics Technician Job at Alaska Air Group (Seatac)

Operations Instrumentation Avionics Technician

Operate and maintain proprietary instrumentation (avionics) systems on U.S. mili...

Location

United States , Ridgecrest

Salary:

70310.00 - 76500.00 USD / Year

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
High school diploma/GED plus 7 years of experience, or Associate's-level (AA/AS/Technical school) plus 2 years of experience
Must be able to be granted a security clearance and maintain one for the duration of employment
Open-mindedness, teach able, high motivation, and team-orientation
Sound character, flexibility, resilience and positive attitude
Ability to perform, manage, and prioritize multiple related tasks in a highly-dynamic and time-sensitive environment

Job Responsibility

Install, maintain, fabricate, assemble, test, operate, troubleshoot, repair, upgrade and optimize complex instrumentation / avionics systems and subsystems, both large- and small-scale
Support pre- and post-flight instrumentation
Support pre-flight aircraft software loading
Fabricate connectorized wire harnesses, avionics assemblies and subassemblies
Maintain information / configuration tracking and documentation
Prepare and deliver documentation up to and including technical reports, briefings and final status reports
Undertake non-local, domestic, and foreign travel to support non-local test-flights
Operate rental and organizational vehicles on and off base to move test equipment to/from the flight line and to/from non-local test sites

Fulltime

New

Avionics Technician Lead, MQ-9

The MQ-9 Avionics Technician Lead is a highly qualified and skilled aircraft ele...

Location

Japan , Iwakuni

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Active Secret US Government Clearance within the last 12 months
High School Diploma or have completed relevant military and/or vocational technical school curriculum
Eight (8) years of actual Aircraft Avionics and/or GCS maintenance experience required
Three (3) years of experience on MQ-9 Aircraft and/or GCS, as an Avionics Technician
Advanced knowledge of basic and complex mechanical maintenance and repair
Advanced knowledge of technical publications related to aircraft mechanical maintenance
Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
Know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems
Have been designated a CDI or Red-X inspector for MQ-9 aircraft
Able to inspect and operate ground support and auxiliary equipment

Job Responsibility

Exercise independent judgment and lead a team of avionics technicians to complete daily aircraft maintenance tasks based on priorities set by their assigned supervisor
Apply expert technical knowledge to solve complex problems by interpreting technical publications, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs
Performs all daily launch/recovery duties in support of operational requirements
Maintain assigned MQ-9 aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments
Apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents
Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment
Make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts
Apply advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities
Use common and complex test instruments in the performance of assigned duties
Provides training to lower-level avionic technicians

Fulltime

Aircraft Maintenance Technician

Job Description: Responsible for inspecting, maintaining, and repairing aircraft...

Location

Taiwan , Kaohsiung

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Knowledge of avionics is a must
To perform 1st line and 2nd line maintenance activities (including daily checks, aircraft towing, aircraft launch & recovery, schedule maintenance, unscheduled maintenance, modification and defect rectification)
Ensure all maintenance tasks are performed in accordance with latest revision of manufacturer’s Maintenance Manual or Technical instructions
Perform troubleshoot problems on aircraft systems
Proper completion of all paperwork related to the assigned task
Segregate and identify upon removal of components
Ensure all tools are accounted for and/or returned to the tool boxes or tool room at shift’s end or after completion of maintenance task
Performance of assigned tasks in accordance with task cards, engineering orders, maintenance manuals and other approved documents
Inform Quality Inspector or supervisor for any difficulty or discrepancy noticed
To perform shifts and roster in hangar, as required

Job Responsibility

Responsible for inspecting, maintaining, and repairing aircraft to ensure safe operation, and conform to the highest quality and safety standard in accordance to the Airbus Helicopters standard and customer expectations

Fulltime

Aircraft Maintenance Technician

Job Description: Responsible for inspecting, maintaining, and repairing aircraft...

Location

Taiwan , Kaohsiung

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Knowledge of avionics is a must
To perform 1st line and 2nd line maintenance activities (including daily checks, aircraft towing, aircraft launch & recovery, schedule maintenance, unscheduled maintenance, modification and defect rectification)
Ensure all maintenance tasks are performed in accordance with latest revision of manufacturer’s Maintenance Manual or Technical instructions
Perform troubleshoot problems on aircraft systems
Proper completion of all paperwork related to the assigned task
Segregate and identify upon removal of components
Ensure all tools are accounted for and/or returned to the tool boxes or tool room at shift’s end or after completion of maintenance task
Performance of assigned tasks in accordance with task cards, engineering orders, maintenance manuals and other approved documents
Inform Quality Inspector or supervisor for any difficulty or discrepancy noticed
To perform shifts and roster in hangar, as required

Job Responsibility

Responsible for inspecting, maintaining, and repairing aircraft to ensure safe operation, and conform to the highest quality and safety standard in accordance to the Airbus Helicopters standard and customer expectations

Fulltime

Avionics Technician

The Avionics Technician installs, inspects, tests, adjusts, or repairs avionics ...

Location

United States , San Angelo

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Must be able to obtain and maintain a CBP Background Investigation Suitability clearance
US Citizenship is required to obtain the clearance
Must have a valid motor vehicle driver's license
High school diploma or equivalent required
Five (5) years of aircraft avionics/electrical related experience required
Possess a high degree of knowledge and expertise in aircraft electrical/avionics systems
Demonstrates in-depth knowledge of applicable maintenance/ technical manuals and publications, and special tools and test equipment
Must be familiar with the operational capabilities and limitations of electrical / avionics systems
Possess a thorough working knowledge of the detection, prevention, and treatment of corrosion
Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction

Job Responsibility

Troubleshoot, repair, and modify avionics, electrical and instrumentation systems installed on aircraft
Solve complex problems by interpreting manufacturers' manuals or similar technical documents and/or drawings
Use intricate test equipment such as, multi-trace oscilloscopes, frequency counters, multi-meters, and other avionics test equipment to perform troubleshooting and operational checks
Perform removal, repair, installation, inspection, and operational check of system components
Repair and/or replace components based on test results following blueprints, schematics, handbooks, and other technical documents
Perform calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents
Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to less experienced technicians throughout all aircraft maintenance and/or modifications efforts
Perform other duties as assigned

Fulltime

Electrical Technician Avionics II

The Airplane Avionics Technician services, repairs, trouble shoots, and replaces...

Location

United States , Lakehurst

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Six (6) or more years’ airplane avionics and electrical experience as a technician on assigned aircraft required, five (5) years preferred or more on DHC-8/300 Series, H/UH/HH-60 helicopters and UV-18 airplanes
Completion of formal maintenance training on assigned aircraft is desired
Qualified by the appropriate USG armed forces airplane avionics and electrical course or civilian equivalent training. FCC Licensed
Recent full-time experience in aviation maintenance with the assigned aircraft during the past 12 months
2 years (2) of flight line and overhaul & inspection experience minimum as required. FCC License highly desired and may be required. Ability to pass and maintain solder certification
Willingness to travel
Must possess and maintain a valid driver’s license and be required to operate a government general purpose vehicle
Must have the ability to obtain and maintain a Government Security Clearance

Job Responsibility

Operationally checks repaired or modified systems for proper operation
Performs quality maintenance on assigned avionics and electrical systems in accordance with federal aviation regulations, original equipment manufacturers, or military technical orders as specified in the statement of work instructions
Repair and replace electrical and avionics components, such as directional gyros, and functional components including engine torque indicators, fuel quantity indicators, radios and course indicator units, etc. using required tools, power tools, machines, and associated equipment
Read and interpret manufacturers' and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Examine all flight systems for air worthiness and reliability, and service all flight systems required to operate engines, flight controls, navigation aids to detect and diagnose malfunctions
Inspect batteries and charging systems to detect and faults or weaknesses
Test airplane navigation systems with approved troubleshooting procedures and diagnostic test equipment, to identify source of malfunction
Repair or replace defective Radios and communication parts and components
Perform miscellaneous duties as required to service aircraft
May specialize in work, repair and modification of flight attitude indicators, precision, and functional spare parts and assemblies

Fulltime

Operations Instrumentation Avionics Technician

Operate and maintain proprietary instrumentation (avionics) systems on U.S. mili...

Location

United States , Ridgecrest

Salary:

70310.00 - 76500.00 USD / Year

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required
High school diploma/GED plus 7 years of experience, or Associate's-level (AA/AS/Technical school) plus 2 years of experience
Must be able to be granted a security clearance and maintain one for the duration of employment
Open-mindedness, teach able, high motivation, and team-orientation
Sound character, flexibility, resilience and positive attitude
Ability to perform, manage, and prioritize multiple related tasks in a highly-dynamic and time-sensitive environment

Job Responsibility

Install, maintain, fabricate, assemble, test, operate, troubleshoot, repair, upgrade and optimize complex instrumentation / avionics systems and subsystems, both large- and small-scale
Support pre- and post-flight instrumentation
Support pre-flight aircraft software loading
Fabricate connectorized wire harnesses, avionics assemblies and subassemblies
Maintain information / configuration tracking and documentation
Prepare and deliver documentation up to and including technical reports, briefings and final status reports
Undertake non-local, domestic, and foreign travel to support non-local test-flights
Operate rental and organizational vehicles on and off base to move test equipment to/from the flight line and to/from non-local test sites

Fulltime

Operations Instrumentation Avionics Technician

Operate and maintain proprietary instrumentation (avionics) systems on U.S. mili...

Location

United States , Ridgecrest

Salary:

70310.00 - 76500.00 USD / Year

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required
High school diploma/GED plus 7 years of experience, or Associate's-level (AA/AS/Technical school) plus 2 years of experience
Must be able to be granted a security clearance and maintain one for the duration of employment
Open-mindedness, teach able, high motivation, and team-orientation
Sound character, flexibility, resilience and positive attitude
Ability to perform, manage, and prioritize multiple related tasks in a highly-dynamic and time-sensitive environment

Job Responsibility

Install, maintain, fabricate, assemble, test, operate, troubleshoot, repair, upgrade and optimize complex instrumentation / avionics systems and subsystems, both large- and small-scale
Support pre- and post-flight instrumentation
Support pre-flight aircraft software loading
Fabricate connectorized wire harnesses, avionics assemblies and subassemblies
Maintain information / configuration tracking and documentation
Prepare and deliver documentation up to and including technical reports, briefings and final status reports
Undertake non-local, domestic, and foreign travel to support non-local test-flights
Operate rental and organizational vehicles on and off base to move test equipment to/from the flight line and to/from non-local test sites

Fulltime

Line Avionics Technician

Alaska Air Group

Location:
United States , Seatac

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 25, 2026

Expiration:
April 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Line Avionics Technician