Lead technician airframe and powerplant Job at Bombardier (Tucson)

Lead Technician, Airframe & Powerplant

The Lead A&P Technician troubleshoots, repairs, inspects and performs maintenanc...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Minimum of 8 years of aircraft maintenance work experience or substantiated equivalent experience
Minimum of 2 years’ corporate / commercial jet experience
Minimum of 1 year Bombardier aircraft model experience
Engine Run & Taxi qualified on Bombardier Aircraft or Delegated Inspector eligible
Demonstrate leadership ability
Demonstrate planning / organization skills
Familiar with all systems installations of Bombardier aircraft model

Job Responsibility

Adhere to Bombardier General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist other maintenance disciplines

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Lead technician, airframe & powerplant (challenger)

At Bombardier, our employees work together to evolve mobility worldwide - one go...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Minimum of 8 years of aircraft maintenance work experience or substantiated equivalent experience
Minimum of 2 years’ corporate / commercial jet experience
Minimum of 1 year Bombardier aircraft model experience
Engine Run & Taxi qualified on Bombardier Aircraft or Delegated Inspector eligible
Demonstrate leadership ability
Demonstrate planning / organization skills
Familiar with all systems installations of Bombardier aircraft model

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with Environmental / Health / Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Assist with fuel and / or de-fuel of aircraft
Assist with engine removal / installation

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Lead Technician, Airframe & Powerplant (A&P)

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Typically, a minimum of 5 years aircraft maintenance work experience or substantiated equivalent experience
Typically, a minimum of 1 year corporate / commercial jet experience
Current, and valid, FAA Airframe and Powerplant (A&P) Certificate
Basic PC skills
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside

Job Responsibility

Perform complex repairs on aircraft systems
Assist in creation of service orders with SAP or applicable operating systems
May assist in complete engine and / or APU runs, as required
Provide time estimates
Train, coach and support other employees
May perform Delegated Inspector (DI) function as qualified by QA

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Lead Technician, Structures

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Training from a sheet metal aircraft technical school or equivalent schooling
Airframe Certification, an Airframe & Powerplant (A&P) Certificate, or a Repairman Certificate
Typically at least 3 years of Corporate aircraft structural sheet metal repair / modification experience
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own a basic set of hand tools with the ability to demonstrate Inventory and control of tools
Ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required
Able to work unscheduled overtime including nonscheduled work days and holidays
Able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) if applicable

Job Responsibility

Troubleshoot, repair, inspect and perform maintenance on customer aircraft
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Assist with aircraft component repair
Remove / install aircraft components as required
Comply with environmental health and safety policies/procedures
Participate in 5-S activities
Perform work in a safe and timely manner

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Aircraft Technician

A P&G Aircraft Technician works as an effective member of the Global Flight Oper...

Location

United States of America , Cincinnati

Salary:

103700.00 - 127000.00 USD / Year

Procter & Gamble

Expiration Date

Until further notice

Requirements

Minimum 2 years practical, hands-on experience with Gulfstream or equivalent category business jets
Must have a FAA Certified Airframe & Powerplant (A&P) license
Must have experience with Federal Aviation Regulations, scheduled/ unscheduled aircraft maintenance, aircraft inspection/troubleshooting, repair of company-operated aircraft and preflight and post flight inspections
Must have minimum 2 years of Turbine Powered aircraft maintenance experience
Must have at least a High School diploma or GED or equivalent education
Ability to acquire and maintain a valid US Passport
Valid driver's license
Candidate must have the ability to work a rotating shifts

Job Responsibility

Working a varied schedule (we work when the planes are available, including nights, weekends, and holidays)
May be required to perform Cabin Safety Attendant and Flight Technician duties on international and domestic flights on occasion
Travel required – to attend initial, recurrent, and enrichment training events related to aircraft and equipment operated
Perform and document inspections, aircraft repair per standard, routine maintenance (all systems, including avionics)
Respond to reported defects, troubleshooting, pre and post flight inspections
Aircraft towing, fueling, de-fueling, aircraft cleaning (exterior and interior)
All aspects of aircraft dispatching and returns
Aircraft Technicians are encouraged to operate independently in the execution of all work in accordance with FAA and company policy
this includes thorough attention to detail and 100% compliance to all documentation requirements
Responsible for the upkeep and maintenance of the hangar, shops, tools, specialty equipment, etc. All tools are provided

Fulltime

Aircraft technician

A P&G Aircraft Technician works as an effective member of the Global Flight Oper...

Location

United States of America , Cincinnati

Salary:

103700.00 - 127000.00 USD / Year

Procter & Gamble

Expiration Date

Until further notice

Requirements

Minimum 2 years practical, hands-on experience with Gulfstream or equivalent category business jets
Must have a FAA Certified Airframe & Powerplant (A&P) license
Must have experience with Federal Aviation Regulations, scheduled/ unscheduled aircraft maintenance, aircraft inspection/troubleshooting, repair of company-operated aircraft and preflight and post flight inspections
Must have minimum 2 years of Turbine Powered aircraft maintenance experience
Must have at least a High School diploma or GED or equivalent education
Ability to acquire and maintain a valid US Passport
Valid driver's license
Candidate must have the ability to work a rotating shifts

Job Responsibility

Working a varied schedule (we work when the planes are available, including nights, weekends, and holidays)
May be required to perform Cabin Safety Attendant and Flight Technician duties on international and domestic flights on occasion
Travel required – to attend initial, recurrent, and enrichment training events related to aircraft and equipment operated
Perform and document inspections, aircraft repair per standard, routine maintenance (all systems, including avionics)
Respond to reported defects, troubleshooting, pre and post flight inspections
Aircraft towing, fueling, de-fueling, aircraft cleaning (exterior and interior)
All aspects of aircraft dispatching and returns
Aircraft Technicians are encouraged to operate independently in the execution of all work in accordance with FAA and company policy
this includes thorough attention to detail and 100% compliance to all documentation requirements
Responsible for the upkeep and maintenance of the hangar, shops, tools, specialty equipment, etc. All tools are provided

Fulltime

Testing Technician

Reliably set-up and perform gas stand, engine dynamometer, special testing, and ...

Location

United States , Arden

Salary:

46400.00 - 65250.00 USD / Year

BorgWarner

Expiration Date

Until further notice

Requirements

Associate’s degree in an engineering related field is preferred or related education and experience in an automotive technical field or certification from an Airframe and Powerplant technical school
Equivalent mechanical powertrain experience in the automotive industry (in-depth engine work including tear down, reassembly, measurement, and dynamometer testing) if coupled with a minimum of 2 years of relevant R&D or technical lab testing experience
Experience in general machining and fabrication, including basic welding
Experience in professional automotive components test environment (powertrain systems, lab or R&D) is desired
Demonstrated mechanical aptitude is a must
Must be proficient in reading and interpreting mechanical and engineering drawings
Experienced and knowledgeable in the proper use of indicators, micrometers and dial calipers and other related equipment
Ability to carry out assigned tasks with minimal supervision, and complete task in a timely manner
Must be able to demonstrate Basic Computer literacy including the ability to use lab related software as well as Microsoft Office applications (Outlook, Excel, Word, PowerPoint, Teams, Edge)
Must be able and willing to attend courses related to specific test protocols

Job Responsibility

Reliably set-up and perform gas stand, engine dynamometer, special testing, and other benchwork
Complete engineering reports, present data to Engineering, as well as other lab duties
Read and understand instructions and secure the necessary procedure(s), work instruction(s), or specification(s) to complete Engineering/Customer requests (GEMS Tickets)
Reads engineering prints and can measure hardware utilizing the proper measurement tools and techniques
Measures and assembles hardware prior to testing
Performs setup of gas and engine stands and changeover of hardware for the next test sequence using correct adapters and connections for testing per specification(s)
Independently operates gas stands, engine dynamometers, and other special testing equipment, observes, and immediately interprets data and reacts accordingly
Performs system-level performance, sub-system level, and component qualification testing on gas stands
Performs gas stand functional and durability testing on gas stands
Performs engine durability testing, which includes installation of engine and dynamometer, dynamometer and engine installation checks, as well as writing and editing test schedules

What we offer

Day 1 Medical Coverage with potential of no monthly premium
Onsite Health Clinic for employees and dependents (age 14 and over) at no cost
Dental, Vision, Life, AD&D, and Disability Coverage
Tuition Reimbursement Program after 18 months
Retirement Savings Plan (401k) with a matching program
Company paid holidays and vacation starting Day 1

Fulltime

Sheetmetal Aircraft Mechanic II - Travel Team

The Traveling Aircraft Mechanic II (Sheetmetal) performs the full range of milit...

Location

United States , Fort Campbell

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Valid up-to-date A&P license
Two (2) years aviation maintenance experience
Three (3) years rotary wing aircraft experience
Two (2) of the years on the assigned Mission Design Series (UH60, AH64, and/or CH47)
All experience must be within the Five (5) most recent years as required
If no A&P, must have the Three (3) years aviation maintenance experience
consisting of Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned MDS (UH60, AH64, and/or CH47)
Must be able to obtain and maintain facility credentials/authorization
US Citizenship is required for facility credentials/authorization at this work site
Tools are Required

Job Responsibility

Performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of moderate difficulty
Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation
Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as
blueprints or manufactures' manuals
Requires working knowledge of technical publications
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records
Must be able to prioritize workload to maintain schedules on assigned projects
Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Services and lubricates aircraft and subsystems

Fulltime

Lead technician airframe and powerplant

Bombardier

Location:
United States , Tucson

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead technician airframe and powerplant

Lead Technician, Airframe & Powerplant

Lead technician, airframe & powerplant (challenger)

Lead Technician, Airframe & Powerplant (A&P)

Lead Technician, Structures

Aircraft Technician

Aircraft technician

Testing Technician

Sheetmetal Aircraft Mechanic II - Travel Team

Lead technician airframe and powerplant

Bombardier

Location:United States , Tucson

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead technician airframe and powerplant

Lead Technician, Airframe & Powerplant

Lead technician, airframe & powerplant (challenger)

Lead Technician, Airframe & Powerplant (A&P)

Lead Technician, Structures

Aircraft Technician

Aircraft technician

Testing Technician

Sheetmetal Aircraft Mechanic II - Travel Team

Location:
United States , Tucson

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
March 26, 2026