Lead SMT Production Engineer Job at Zenovo (Merseyside)

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Supplier Industrialization Engineer - PCBA

We are seeking a highly motivated and experienced Supplier Industrialization Eng...

Location

United States , San Jose

Salary:

140000.00 - 220000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Industrial Engineering, Mechanical Engineering, or a related technical field
7+ years of experience progressive experience in supplier industrialization, manufacturing engineering, or process engineering, with a strong focus on Printed Circuit Board Assembly (PCBA) and Top Level Assembly (TLA)
Deep understanding of PCBA manufacturing processes, including SMT, Through-Hole Technology (THT), reflow, conformal coating, underfill, washing, press fit, pin insertion, and depanelization
Proficiency in Design for Manufacturing (DFM) and Design for Assembly (DFA) principles
Strong knowledge and practical experience with quality methodologies and tools (e.g., Root Cause Corrective Action (RCCA), Fishbone, Process Mapping, 5S, SPC, pFMEA, DOE, Gage R&R)
Solid experience with New Product Introductions (NPIs) and project management in a manufacturing environment
Familiarity with industry standards such as IPC-A-600, IPC-A-610, J-STD-001
Experience with CAD software and PCBA layout tools
Excellent analytical and problem-solving skills, with the ability to interpret complex data and drive actionable insights
Strong communication, negotiation, and interpersonal skills to effectively collaborate with suppliers and internal cross-functional teams

Job Responsibility

Supplier Development & Qualification: Conduct comprehensive audits and assessments of existing and potential PCBA suppliers (domestic and international) to evaluate their manufacturing infrastructure, process controls, automation levels, and quality systems
Collaborate within Supply Chain and Engineering teams to define rigorous supplier selection criteria and execute sourcing strategies
Lead supplier onboarding, development, and risk mitigation strategies to ensure long-term quality, cost optimization, and supply chain resilience
Design for Manufacturability (DFM) & Assembly (DFA): Actively participate in early-stage product development, providing critical DFM/DFA feedback on PCBA designs to engineering teams
Work closely with design engineers to optimize PCBA layouts for manufacturability, integrating supplier-specific feedback into part and assembly designs (e.g., panelization, stencil design, soldering, AOI, ICT)
Ensure manufacturing best practices are embedded early in the design process
Process Optimization & Manufacturing Readiness: Lead the development and validation of new SMT (Surface Mount Technology) processes and technologies (e.g., fine-pitch, micro-BGA, PoP, 0201/01005 components) at supplier sites
Develop and implement Process Flow Diagrams (PFDs) to identify bottlenecks, improve throughput, and optimize automation
Drive prototyping and pilot builds to evaluate and refine PCBA manufacturing processes prior to volume ramp-up
Implement End-of-Line (EOL) test strategies and in-line process validation to ensure stable and repeatable quality

Fulltime

Senior Engineer, Packaging Engineering

We are seeking a highly skilled and innovative Senior Engineer, Packaging Engine...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor’s degree with at least 2 years of relevant work experience, or Master’s degree in material science, mechanical engineering, computer science, or other engineering disciplines
Proficient understanding of packaging domains such as SMT, PCB assembly, solder joint reliability, board level reliability, packaging materials, failure analysis, and PCB layout
Additional knowledge in areas like die attach, wire bond, wafer thinning, and molding is a plus
Self-motivated and self-directed
Strong work ethic, capable of performing effectively under high-pressure situations, and maintaining composure in the face of uncertainties
Excellent communication skills, enabling collaboration with global functional teams
Exceptional problem-solving skills with expertise in experimental design and statistical analysis
Experience with programming languages such as Python or SQL is a plus

Job Responsibility

Leads new SSD product development from concept design and qualification to mass production
Generate innovative product concepts and transform them into tangible, market-ready products
Work closely with global functional teams in US, India, South Korea, and Israel, review feasibility design drawings and propose design options
Collaborate extensively with internal teams, validate design options through characterization builds, perform comprehensive DFX (Design for eXellence) analysis, including DFM (Design for Manufacturability), DFA (Design for Assembly), DFRW (Design for Rework), as well as Cost and UPH (unit per hour) analysis, review mechanical and electrical simulations, initiate assembly process flow, and deliver most optimized design for manufacturing with yield and quality
Ensuring build readiness, execute package qualification plan, follow up package reliability status, investigate and close failures on time
Monitor assembly and test yield on engineering/customer sample and low volume production builds
Drive yield improvement and manage excursions
Lead new product from low volume to high volume production transition with yield and quality meeting goals
Ensure FMEA, SOD, Control Plan, recipe guideline, SPC and other assembly controls are ready prior to high volume production
Lead new technology transition (new wafer tech/process/material) from engineering stage to volume production

Fulltime

New

Process Engineer

Join our innovative team. Want to do more than just imagine the ways our world w...

Location

China , Shanghai

Salary:

Not provided

Aptiv plc

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering
3-5 years’ SMT and PTH experience in a high volume Electronics Manufacturing environment, with particular emphasis on experience
Well working knowledge of manufacturing process design, cycle time Analysis, APQP, MSA, PFMEAs, DFM Rules, Lean six sigma tools
Familiar with ISO9000. ISO14000 and IATF16949 system requirement and 6 SIGMA
Good English on both spoken and written is plus

Job Responsibility

Handle NPI, co-work with global team to complete DFM, process design, PFMEA, new product quotation estimation, cooperate engineer team get NPI build readiness completed, lead and participate product PVT build
Manage process defect analysis, take prevent action, best practice and lesson learn share to team members
Lead and participate customer audit, coordinate engineer team follow up improvement action
Coordinate activities of SMT manufacturing operations to obtain optimum efficiency and economy of operations and maximize profits while meeting customer expectations for quality and on-time shipments
Lead & manage ECN/ECR implementation on engineering portion
Coordinate process, manufacturing and logistics for all activities for a product launch. Prototype series, Pre-Series, Run at Rate and Production release
Establish and follow project time schedules, including resource planning
Work out and follow action plans
Conduct DFM, and work together with Engineering team for product design and process design related issues
Handle design reviews for process team and secure manufacturability of product

Fulltime

Manufacturing Engineer

The Manufacturing Engineer is responsible for providing process engineering and ...

Location

United States , Tampa

Salary:

Not provided

Sypris Electronics

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical/Electrical/Industrial Engineering or equivalent combination of education and experience
Minimum two years of process engineering experience with electronic components and assemblies in a high reliability industry
Possess an understanding of high-mix/low-volume manufacturing
Hands on technical experience with SMT processes, soldering and testing requirements
Knowledgeable with PCB Assembly Design for Manufacturability
Hands-on experience with electromechanical assembly processes
Experience designing box build cell layouts
Experience with document collection, hardware hierarchy and specification reviews with customers
Knowledge of data collection and statistical techniques including ability to implement Statistical Process Control
Knowledge of Lean/Six Sigma principles and application methods

Job Responsibility

Designs, develops, troubleshoots and documents various mechanical & electro-mechanical processes and operations used in the manufacture of electronic products
Plans and performs complex process engineering assignments, with assistance as needed, in the research, design, development, troubleshooting, upgrading and documentation of major manufacturing processes
Evaluates new material and process techniques to determine economic and/or quality impact on company products, reviews inputs from suppliers, design engineering and manufacturing and reports results to management
Prepares and issues manufacturing work instructions related to product changes or new products, processes or methods specifying sequence of operations and standard work for manufacturing processes
Compiles and evaluates process control & test data to define capabilities and variables for process or product specifications
Leads manufacturing and production readiness reviews
Reviews new product requirements with Sypris design staff or customer to ensure DFx and compatibility of processing methods
Partners with Quality Engineers to review and analyze defect/yield data
coordinates root cause and corrective actions using appropriate tools/methodologies
Generates procedures, deviations, purges, and other process documentation

What we offer

health, dental, vision, life, disability, and 401(k) with company matching
9/80 work schedule

Fulltime

New

Staff Engineer, SMT Process Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Mechanical, Electrical, Electronics, or Manufacturing Engineering or any equivalent
Minimum 4 years of hands-on experience in semiconductor manufacturing process field
Knowledge of soldering principles, flux chemistry, thermal profiling, and IPC standards
Proficient in DOE, SPC, FMEA, and root cause analysis tools (e.g., 8D, Fishbone, 5 Whys)
Experience with automation, vision inspection systems, and process control software is a plus
Excellent problem-solving, analytical, and communication skills
Ability to work independently and lead cross-functional teams
Lean Six Sigma certification is an advantage

Job Responsibility

Develop, optimize, and sustain SMT and mechanical assembly processes, with a primary focus on through hole components
Lead process characterization activities, including DOE planning/execution and in‑depth root cause analysis, to drive yield, quality, and process robustness improvements
Collaborate closely with cross-functional teams—including manufacturing, quality, and NPI engineering—to support new product introduction and smooth transition to sustaining mode
Evaluate, select, and implement new equipment, tooling, and manufacturing technologies to enhance capability, efficiency, and cost effectiveness
Create, maintain, and continuously improve process documentation such as work instructions, control plans, PFMEAs, and standard operating procedures
Provide technical guidance and training to production operators and engineering teams to strengthen manufacturing competency
Monitor key process KPIs and drive structured continuous improvement initiatives using data-driven methodologies
Support internal and external customer audits, technical reviews, and process capability assessments
Drive process capability (CPK) improvements to meet minimum CPK > 1.67 and stretch target > 2.0
Achieve and sustain first-pass yield (FPY) improvement targets of > 99.5%

Fulltime

Staff Engineer, SMT Process Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Mechanical, Electrical, Electronics, or Manufacturing Engineering or any equivalent
Minimum 4 years of hands-on experience in semiconductor manufacturing process field
Knowledge of soldering principles, flux chemistry, thermal profiling, and IPC standards
Proficient in DOE, SPC, FMEA, and root cause analysis tools (e.g., 8D, Fishbone, 5 Whys)
Experience with automation, vision inspection systems, and process control software is a plus
Excellent problem-solving, analytical, and communication skills
Ability to work independently and lead cross-functional teams
Lean Six Sigma certification is an advantage

Job Responsibility

Develop, optimize, and sustain SMT and mechanical assembly processes, with a primary focus on through hole components
Lead process characterization activities, including DOE planning/execution and in‑depth root cause analysis, to drive yield, quality, and process robustness improvements
Collaborate closely with cross-functional teams—including manufacturing, quality, and NPI engineering—to support new product introduction and smooth transition to sustaining mode
Evaluate, select, and implement new equipment, tooling, and manufacturing technologies to enhance capability, efficiency, and cost effectiveness
Create, maintain, and continuously improve process documentation such as work instructions, control plans, PFMEAs, and standard operating procedures
Provide technical guidance and training to production operators and engineering teams to strengthen manufacturing competency
Monitor key process KPIs and drive structured continuous improvement initiatives using data-driven methodologies
Support internal and external customer audits, technical reviews, and process capability assessments
Drive process capability (CPK) improvements to meet minimum CPK > 1.67 and stretch target > 2.0
Achieve and sustain first-pass yield (FPY) improvement targets of > 99.5%

Fulltime

Quality Engineer

Focuses on SMT Line and PCBA Assembly processes: SMT / PCBA Quality Engineers ar...

Location

Malaysia , Penang, Bukit Minyak area (Mainland)

Salary:

Not provided

Teradyne

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical / Electronics / Manufacturing / Mechanical Engineering
5 years of experience in SMT / PCBA Manufacturing or Quality or Engineering
Strong understanding of SMT and reflow processes, PCB assembly, and inspection technologies (SPI, AOI, AXI)
Experience in FMEA, SPC, and CAPA methodologies
Strong analytical and problem-solving skills with attention to detail
Proficient in Microsoft Office Suite (Word, Excel, PowerPoint)
Excellent English communication skills (written and verbal)
Ability to work both independently and in cross-functional teams
Knowledge of IPC-A-610, J-STD-001, and ESD control standards (ANSI/ESD S20.20)
Knowledge of Six Sigma tools and methods

Job Responsibility

Establish and sustain process controls across SMT operations (printing, placement, reflow, AOI/AXI) and PCBA assembly
Lead root cause analysis and CAPA for defects such as solder bridging, tombstoning, insufficient solder, opens, and component misplacements
Work with Manufacturing Engineering to optimize reflow profiles, stencil design, and pick-and-place parameters
Maintain process documentation, control plans, PFMEA, and MSA for SMT/PCBA lines
Conduct risk hunting, internal product audits, and layered process audits to ensure process compliance and improvement
Collaborate with NPI and Test Engineering teams to ensure DFM/DFT compliance during board design and new product introduction
Manage supplier quality for PCBA-related materials and drive improvements through the 8D methodology
Analyze FPY, DPMO, AOI escape, and test yield data to identify trends and initiate proactive quality improvement plans
Support failure analysis and coordinate investigations with suppliers, field service, and customer quality when needed
Drive process improvement projects targeting zero-defect goals, cost reduction, and enhanced manufacturing robustness

What we offer

Outpatient medical
Flexible benefits (Optical, dental, health screening, fitness and wellness)
Insurance
Annual leave
ESPP

Fulltime

Lead SMT Production Engineer

Zenovo

Location:
United Kingdom , Merseyside

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead SMT Production Engineer

Electrical Engineer II, Video Products - Sustaining