CrawlJobs Logo

Lead safety and reliability engineer

airbus.com Logo

Airbus

Location Icon

Location:
Germany , Immenstaad am Bodensee ▼

Category Icon
Category:
Research and Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

This position is part of our Safety Business Unit, which aims to enable safer, greener and more inclusive industries and transportation systems.

Job Responsibility:

  • Developing and defining new concepts and methodologies for complex, RAMS and Safety critical systems on spacecraft, substem or equipment level
  • Overall technical and expert authority for all RAMS and Safety topics within a complex program or product portfolio
  • Performing complex safety assessments at different product maturity stages (safety phases I, II and III)
  • Analyzing and solving highly complex, RAMS problems including extensive analysis of system interfaces and performance
  • Directing and coordinating external/internal RAMS teams and acting as the primary, final technical negotiator with major customers and governmental/international space agencies
  • Developing and leading the implementation of risk optimization and safety-by-design strategies that influence core system architecture
  • Strategic guidance for junior/senior engineers and defining the technical training roadmap for the department
  • Performing and coordinating safety assessments for operations, remove & repair activities
  • Establishing and leading reliability, availability and maintainability analyses for multi-disciplinary systems
  • Leading the preparation of FMECA, HSIA, fault tree analyses
  • defining, coordinating, and managing technical interfaces with multiple major equipment suppliers
  • Defining RAMS requirements in contribution to specifications at equipment level and following the relevant design development to check the compliance to the defined requirements
  • Coordinating and conduction the preparation of hazard analyses for spacecraft, equipment/instruments as well as for ground support equipment
  • Co-engineering with FDIR architects (failure detection, isolation and recovery) and optimizing the FDIR architecture
  • Preparation of required documentation and technical reports for internal and external presentation of work results

Requirements:

  • Relevant completed degree with standard period of study of up to 4 years in aeronautical engineering or mechanical engineering and related extended subject-specific additional qualifications
  • or completed vocational training with corresponding, particularly extensive, subject-specific additional qualification
  • Extensive and specialized knowledge and experience in the above-mentioned areas of responsibility
  • In-depth knowledge and experience in un-manned Space Systems, in particular payload system
  • Extensive, applied knowledge and experience in the field of Safety and Reliability Engineering in the Aeronautical or Space sector
  • Advanced knowledge and experience of complex hazard analysis and fault tree analysis
  • Comprehensive knowledge of Safety processes, regulations and guidelines (ECSS-Q-ST-40C, ARP 4761, ARP 4754A) is mandatory
  • Excellent analytical and problem-solving skills
  • Excellent communication, coordination, and strong sense of responsibility
  • High level of commitment, flexibility, and a strong service mentality
  • Very good written and spoken English and German
  • Willingness to travel domestically and internationally occasionally
What we offer:
  • Mobile working and flexible working hours
  • Fair and attractive remuneration and special payments
  • 30 days' holiday and additional days off for special occasions
  • Intensive induction and expert support as part of onboarding in the form of personalized onboarding with a personal mentor
  • Excellent training opportunities and promising development prospects
  • Attractive social benefits and offers, including employer-financed pension scheme, employee share options, discounted car leasing, bike leasing, special conditions for insurance, employee benefits at cooperating companies
  • On-site facilities (depending on location) e.g. canteen and cafeteria, fitness studio, on-site kindergarten, company medical service and other health-related services

Additional Information:

Job Posted:
February 21, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Airbus - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Lead safety and reliability engineer

Senior Electrical Reliability Engineer

Champion efforts that maintain and continuously improve the reliability of the m...
Location
Location
United States , Ashdown
Salary
Salary:
Not provided
domtar.com Logo
Domtar
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering
  • Minimum of 3 years of applicable experience in electrical reliability, distribution systems, or related field
  • Strong commitment to safety and safe work practices
  • Proficient computer skills and familiarity with reliability tracking systems
Job Responsibility
Job Responsibility
  • Lead Root Cause Problem Elimination (RCPE) efforts for downtime and slowback events
  • Assist in capital planning for the Electrical Distribution system
  • Support turbine generator repairs, upgrades, and overhauls
  • Serve as a technical resource for operators and maintenance personnel
  • Track and report Key Performance Indicators (KPIs) related to electrical reliability, providing monthly reports
  • Lead and maintain Electrical Reliability Programs
  • Provide support for mill-wide projects and ISO compliance requirements
What we offer
What we offer
  • Competitive compensation
  • Supportive working environment
  • Rewarding career paths
  • Plenty of opportunities for learning and growth
  • Fulltime
Read More
Arrow Right

Robotic Safety Engineer

We are looking for a Robotic Safety Engineer to define the safety strategies and...
Location
Location
United States , San Jose
Salary
Salary:
Not provided
figure.ai Logo
Figure
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of Bachelor’s Degree in Robotics, Electrical Engineering, Mechanical Engineering, or a related discipline
  • At least 5 years of experience getting products through safety certification
  • Extensive experience in safety engineering on various robotic systems, with a focus on safety-critical functions in consumer applications
  • Knowledge of and experience in consumer products safety and liability, as these apply to hardware and robotics.
  • Demonstrated ability to solve problems related to robotics and passion for cutting edge technology
  • Ability to work independently, while also effectively collaborating across multiple organizations
  • Ability to think critically to develop innovative solutions to novel and unique safety challenges
  • Creative problem-solving skills, with the ability to assess risk and make design and development decisions to enhance safety
  • Track record of obtaining NRTL safety certifications for commercialized products
  • In depth knowledge of industrial robotics and safety standards such as R15.06, R15.08, IEC 62061 and IEC 61508
Job Responsibility
Job Responsibility
  • Create and implement a holistic strategy for consumer safety in the home in consultation with products safety and liability counsel
  • Lead the assessment and acquisition of applicable product safety certifications for robotic systems, applying professional judgment to navigate new and evolving regulatory frameworks to ensure full compliance while fostering innovation.
  • Collaborate with cross-functional teams to validate safety requirements and develop synergy between safety activities and development activities
  • Apply industry-standard safety methodologies to contribute to the development and architectural design, supporting the deployment of humanoid robot prototypes and safety-critical systems in the home and commercial environments
  • Perform safety activities in coordination with design, development, and verification of robotic systems, including generating safety artifacts such as safety plans, risk analysis and reliability assessments
  • Strategically integrate safety considerations throughout the product development lifecycle, from design to deployment
Read More
Arrow Right

R&d electrical engineer - nuclear safety assessment

We are seeking an R&D Electrical Engineer with nuclear weapons experience to ass...
Location
Location
United States , Albuquerque
Salary
Salary:
114000.00 - 227500.00 USD / Year
sandia.gov Logo
Sandia National Laboratories
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
  • Ability to obtain and maintain a DOE Q clearance
  • Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement
  • Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers
  • Outstanding verbal and written skills, including the ability to develop and present briefings
  • Experience working on engineering design, qualification, production, or related modeling/simulation projects
  • Expertise in electrical circuit design and analysis: Proficiency in power electronics, micro-electronics, integrated circuits, and analog and digital circuit design applied to safety-critical systems, including RF, optical, or radar sensors
  • Proficiency in safety-analysis methods: Strong understanding of fault-tree analysis, failure-modes-and-effects analysis, and margin quantification, with a background in reliability engineering or advanced margin-quantification frameworks
  • Experience with systems engineering: Demonstrated experience in systems engineering for nuclear or high-consequence weapons systems, including familiarity with the SNL nuclear weapon product realization process and nuclear weapon safety standards and related DOE orders
  • System-of-systems thinking: Experience applying system-of-systems thinking to electrical integration, ensuring end-to-end functionality
Job Responsibility
Job Responsibility
  • Independently review detailed technical documents and identify salient issues related to electrical design and testing in the context of nuclear safety
  • Engage with weapon system, component design, assurance, and other surety organizations, with a focus on electrical components and systems
  • Maintain awareness of issues related to design, development, production, maintenance, and dismantlement of weapon systems, particularly in the electrical domain
  • Assess tests, materials, and components for adequacy against requirements, emphasizing electrical testing and analysis
  • Evaluate procedures, product specifications, and standards for compliance with nuclear safety requirements
  • Lead independent safety assessments of nuclear weapon systems and components, analyzing responses under thermal, shock, vibration, and EMI/EMC environments, utilizing your expertise in electrical circuit design and analysis
  • Define problem scope and requirements, develop technical approaches, and apply quantitative and qualitative methods (e.g., fault-tree analysis, failure-modes-and-effects analysis, margin quantification)
  • Design experiments or simulations to evaluate safety-critical subsystems, collaborating with system and test engineers to verify requirements, particularly in electrical testing
  • Develop analytical frameworks and digital models to support risk-informed decisions leveraging your experience in system-of-systems thinking for electrical integration
  • Mentor junior engineers in safety-analysis techniques and review their deliverables for technical accuracy
What we offer
What we offer
  • Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
  • Extraordinary co-workers
  • Some of the best tools, equipment, and research facilities in the world
  • Career advancement and enrichment opportunities
  • Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
  • Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance
  • Fulltime
Read More
Arrow Right

Reliability Engineer

The Reliability Engineer is responsible for developing and leading asset reliabi...
Location
Location
United States , Bennettsville
Salary
Salary:
Not provided
domtar.com Logo
Domtar
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or related technical field
  • Minimum five (5) years of experience in maintenance, reliability, or engineering within manufacturing or heavy industrial environments (pulp and paper experience preferred)
  • Strong knowledge of RCM, FMEA, RCFA, CMMS systems, and predictive maintenance technologies
  • Demonstrated commitment to safety and continuous improvement
Job Responsibility
Job Responsibility
  • Lead the development and execution of precision, preventive, and predictive maintenance strategies that improve equipment reliability
  • Champion Root Cause Problem Elimination (RCPE) and Failure Mode & Effects Analysis (FMEA) to proactively address equipment failures
  • Manage and optimize condition-based monitoring programs, including vibration, infrared, oil analysis, and ultrasound technologies
  • Establish and maintain robust systems and tools that enable maintenance and operations teams to monitor and interpret equipment and process health data effectively
  • Optimize maintenance strategies using asset criticality and reliability data to focus efforts on high-impact equipment
  • Analyze failure data and trends to identify systemic issues and drive continuous improvement initiatives
  • Collaborate with planning and scheduling teams to ensure timely and efficient execution of maintenance activities aligned with reliability goals
  • Serve as a subject matter expert on reliability tools, CMMS platforms, and emerging technologies
  • Develop and deliver training and communications to enhance reliability awareness and engagement among maintenance and operations personnel
  • Monitor and report on key reliability and maintenance KPIs, such as MTBF, MTTR, and OEE
What we offer
What we offer
  • competitive compensation
  • a supportive working environment
  • rewarding career paths
  • plenty of opportunities for learning and growth
  • Fulltime
Read More
Arrow Right

Field Service Reliability Engineer

Founded in 1985, ATS is a company with a presence in the United States, Mexico a...
Location
Location
United States , Hammond
Salary
Salary:
Not provided
atpchemical.com Logo
Advanced Technology Products
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering (ABET accredited)
  • Eight or more years of reliability experience across 2 or more manufacturing sites
  • Demonstrates ability to perform full array of reliability tool sets
  • Strong technical understanding of electrical or mechanical components, tools, and designs
  • Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis
  • Ability to research and apply new equipment technology / trends
  • Robust problem solving, mathematical, analytical, and decision making skills
  • Proficiency with computers, maintenance systems, and applications, including Microsoft Office
  • Excellent verbal communication, facilitation, and presentation skills
  • Strong reporting and technical writing capability
Job Responsibility
Job Responsibility
  • Extensive travel required. (Local, National, International)
  • Promotes and adheres to the ATS safety culture
  • Engages in various work environments and industries to lead reliability centered maintenance efforts
  • Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel
  • Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership
  • Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction
  • Actively drives the implementation of equipment improvement projects
  • Identifies and implements current and new processes / technologies to increase equipment performance and uptime
  • Champions systems and best practice procedures towards a proactive manufacturing culture
  • Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques
  • Fulltime
Read More
Arrow Right

Field Service Reliability Engineer

Founded in 1985, ATS is a company with a presence in the United States, Mexico a...
Location
Location
United States , Hammond, Indiana
Salary
Salary:
Not provided
atpchemical.com Logo
Advanced Technology Products
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering (ABET accredited)
  • Eight or more years of reliability experience across 2 or more manufacturing sites
  • Demonstrates ability to perform full array of reliability tool sets
  • Strong technical understanding of electrical or mechanical components, tools, and designs
  • Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis
  • Ability to research and apply new equipment technology / trends
  • Robust problem solving, mathematical, analytical, and decision making skills
  • Proficiency with computers, maintenance systems, and applications, including Microsoft Office
  • Excellent verbal communication, facilitation, and presentation skills
  • Strong reporting and technical writing capability
Job Responsibility
Job Responsibility
  • Extensive travel required. (Local, National, International)
  • Promotes and adheres to the ATS safety culture
  • Engages in various work environments and industries to lead reliability centered maintenance efforts
  • Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel
  • Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership
  • Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction
  • Actively drives the implementation of equipment improvement projects
  • Identifies and implements current and new processes / technologies to increase equipment performance and uptime
  • Champions systems and best practice procedures towards a proactive manufacturing culture
  • Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques
  • Fulltime
Read More
Arrow Right

Field Service Reliability Engineer

Founded in 1985, ATS is a company with a presence in the United States, Mexico a...
Location
Location
United States , Chicago, Illinois
Salary
Salary:
50.96 - 65.19 USD / Hour
atpchemical.com Logo
Advanced Technology Products
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering (ABET accredited)
  • Eight or more years of reliability experience across 2 or more manufacturing sites
  • Demonstrates ability to perform full array of reliability tool sets
  • Strong technical understanding of electrical or mechanical components, tools, and designs
  • Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis
  • Ability to research and apply new equipment technology / trends
  • Robust problem solving, mathematical, analytical, and decision making skills
  • Proficiency with computers, maintenance systems, and applications, including Microsoft Office
  • Excellent verbal communication, facilitation, and presentation skills
  • Strong reporting and technical writing capability
Job Responsibility
Job Responsibility
  • Promotes and adheres to the ATS safety culture
  • Engages in various work environments and industries to lead reliability centered maintenance efforts
  • Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel
  • Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership
  • Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction
  • Actively drives the implementation of equipment improvement projects
  • Identifies and implements current and new processes / technologies to increase equipment performance and uptime
  • Champions systems and best practice procedures towards a proactive manufacturing culture
  • Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques
  • Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts
  • Fulltime
Read More
Arrow Right

Cleared Senior/Principal Systems Engineer - Nuclear Safety Assessment

We are seeking a dedicated R&D Systems Engineer with nuclear weapons experience ...
Location
Location
United States , Albuquerque
Salary
Salary:
114000.00 - 227500.00 USD / Year
sandia.gov Logo
Sandia National Laboratories
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
  • An active DOE Q clearance, or equivalent is required to start
  • High proficiency in foundational science and engineering principles, including safety-analysis methods such as fault-tree analysis, failure modes and effects analysis (FMEA), and margin quantification
  • Experience with systems engineering for nuclear or high-consequence weapons systems, including applying system-of-systems thinking to ensure end-to-end functionality
  • Proven ability to lead complex technical projects on schedule, mentor team members, and deliver high-quality products, with demonstrated leadership experience as a project manager, technical lead, principal investigator, or similar role
  • Understanding of nuclear surety and reliability requirements, including familiarity with nuclear weapon safety standards, related DOE orders, and the SNL nuclear weapon product realization process
  • Background in reliability engineering or advanced margin-quantification frameworks
  • Excellent technical writing and executive presentation skills
  • Proven ability to work on challenging engineering problems in a fast-paced, collaborative team environment requiring extensive cross-organizational teamwork
Job Responsibility
Job Responsibility
  • Independently review detailed technical documents and identify salient issues related to nuclear safety
  • Engage with weapon system, component design, assurance, and other surety organizations
  • Maintain awareness of issues related to design, development, production, maintenance, and dismantlement of weapon systems
  • Assess tests, materials, and components for adequacy against requirements
  • Evaluate procedures, product specifications, and standards for compliance
  • Lead independent safety assessments of nuclear weapon systems and components, analyzing responses under thermal, shock, vibration, and EMI/EMC environments
  • Define problem scope and requirements, develop technical approaches, and apply quantitative and qualitative methods (e.g., fault-tree, FMEA, margin quantification)
  • Design experiments or simulations to evaluate safety-critical subsystems, collaborating with system and test engineers to verify requirements
  • Develop analytical frameworks and digital models to support risk-informed decisions
  • Mentor junior engineers in safety-analysis techniques and review their deliverables for technical accuracy
What we offer
What we offer
  • Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
  • Extraordinary co-workers
  • Some of the best tools, equipment, and research facilities in the world
  • Career advancement and enrichment opportunities
  • Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
  • Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy