Lead Painting Technician Job at Old Dominion University (Norfolk)

Lead Image Technician

Maintains store image by painting interior and exterior of store buildings, gas ...

Location

United States of America , Tempe

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

High school diploma or GED preferred
2-5 years of retail painting experience required
leadership or crew lead experience preferred
Experience in both interior and exterior painting and graphics installation
Must be able to use both conventional and airless spray systems
Must possess basic computer and email communication skills
Must have a valid driver's license and be insurable under company policy
Must be able to safely drive and back up a truck with a trailer attached
Requires traveling to store locations throughout the Arizona Division
some out-of-town travel and overnight stays may be required

Job Responsibility

Maintains store image by painting interior and exterior of store buildings, gas canopies, parking lot stripes, and other structures
Installs and maintains interior graphics such as wall coverings and hanging signage
Leads a team of Image Technicians in performing daily preparation, painting, graphics installations, and cleanup of retail facilities throughout the region
Responsible for driving a company truck and trailer, transporting crew members, tools, and materials to various store locations, ensuring project efficiency, safety, and quality standards are met
Leads and assists the team in preparation and application of surfaces to be painted and in general cleanup of retail facilities throughout the region
Paints interior and exterior surfaces of buildings, gas canopies, parking lots (striping), curbs, bollards, and other related structures
Installs interior graphics packages such as vinyl wall coverings, hanging signage, and branding materials
Drives company truck and trailers safely to and from job sites while transporting crew members, tools, and equipment
Coordinates daily work schedules, project assignments, and logistics to meet operational and safety requirements
Helps team accomplish daily production, quality, and safety goals

Fulltime

New

Maintenance Helper

Summit Skilled Solutions is looking to identify a Maintenance Helper in New Have...

Location

United States , New Haven

Salary:

20.00 - 23.00 USD / Hour

Summit Skilled Solutions

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent
Valid driver's license
Ability to read, understand, and follow written instructions, safety procedures, and maintenance documentation
Strong communication skills and ability to work effectively with team members and building occupants

Job Responsibility

Assist with the maintenance and repair of facility systems and equipment
Perform preventive maintenance activities according to established schedules and written procedures
Support repairs involving HVAC, plumbing, electrical, lighting, carpentry, and building systems
Complete touch-up painting and general building maintenance tasks
Assist with landscape and grounds maintenance as needed
Document maintenance activities and equipment performance information
Follow all company safety procedures and site policies
Support special projects and additional assignments as directed by the Site Manager or Lead Technician

Fulltime

Maintenance Technician

We are looking for a Maintenance Technician to support the upkeep and readiness ...

Location

United States , Princeton

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

At least 3 years of experience in property maintenance, facilities support, or a related maintenance role
Working knowledge of maintenance planning, maintenance management, and facility inspection practices
Ability to perform semi-skilled repairs across multiple trades, including carpentry, painting, drywall, plumbing, and basic electrical work
Familiarity with maintenance contracts and general facilities management processes
Understanding of applicable safety standards, local building requirements, and quality expectations
Ability to maintain organized service records, inventory logs, and purchase documentation
Availability to participate in an on-call rotation and respond to urgent repair needs outside standard business hours

Job Responsibility

Handle assigned maintenance requests by evaluating issues, determining solutions, and completing repairs with team lead support when needed
Perform general building upkeep, including basic carpentry, painting, drywall repair, lock work, and minor non-licensed plumbing/electrical tasks
Prepare vacant units for move-in by fixing damage and replacing necessary items
Assist with preventive maintenance to maintain systems and minimize future repairs
Keep the property clean and presentable by removing debris, managing recyclables, and supporting trash disposal
Organize tools, equipment, and materials while assisting with inventory tracking and storage
Maintain accurate records of work orders, purchases, and approved equipment
Take part in the on-call rotation and respond to maintenance emergencies as required
Safely use hand tools, deliver resident notices, and move small tools or equipment between work areas

What we offer

Medical
Dental
Vision
401k
PTO
Paid Holidays

Fulltime

O&M Technician I

Position Purpose: Provides day-to-day monitoring and basic plant and pump/booste...

Location

United States , Spencer

Salary:

Not provided

Veolia

Expiration Date

Until further notice

Requirements

High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions
Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals
Experience using material handling equipment, pressure gauges and precision measuring instruments
Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred
Ability to perform basic mathematical calculations
Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment
Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action
Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC
Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals
Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

Paid time off policies
Health insurance
Dental insurance
Vision insurance
Life insurance
Savings accounts
Tuition reimbursement
Paid volunteering
Employer sponsored 401(k) plan

Fulltime

O&M Technician I

Position Purpose: Provides day-to-day monitoring and basic plant and pump/booste...

Location

United States , Burkburnett

Salary:

Not provided

Veolia

Expiration Date

Until further notice

Requirements

High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions
Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals
Experience using material handling equipment, pressure gauges and precision measuring instruments
Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred
Ability to perform basic mathematical calculations
Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment
Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action
Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC
Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals
Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

paid time off policies
health insurance
dental insurance
vision insurance
life insurance
savings accounts
tuition reimbursement
paid volunteering
employer sponsored 401(k) plan

Fulltime

Maintenance Mechanic Lead - 3rd Shift

JOB DESCRIPTION Position Summary This position is responsible for leading and ...

Location

United States , Oakland

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
3-5 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Effectiveness in prioritizing assigned duties and evaluating the work of personnel
Outstanding skills for offering training and leadership to staff for them to be able to successfully carry out diverse duties associated with the building trades
Ability to interpret, illustrate, and apply regulation codes and rules
Outstanding ability to interpret sketches, blueprints, and work orders to other personnel
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills

Job Responsibility

Instructs and offers guidance and directives to a team of maintenance technicians while being involved in one or more of the skilled activities
Gives support to supervisor and/or manager in regards to accomplishing tasks while referring uncommon technical issues to the supervisor
Offers inputs into maintenance technician performance evaluations since the lead role oversees the duties of assigned maintenance technicians
Designates and monitors the work of maintenance personnel in order to complete scheduled/planned work activities while keeping mechanical downtime to a minimum level to achieve department’s commitments and targets
Guarantees adherence to safety practices and principles, and to the relevant Federal, State, and Local codes and promotes a safe work environment
Ensures the maintenance of equipment, tools and other belongings in a clean, secure, and appropriate working condition and for the maintenance shop to be neat and clean
Maintains, troubleshoots and repairs various production equipment systems and devices and performs building and grounds maintenance and facility repairs as needed to include carpentry, plumbing, and painting
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime, and identify opportunities for improvement
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Performs high quality work that meets Industry accepted maintenance practices to maintain compliance with external regulatory agencies

Fulltime

Multi-Trade Maintenance Technician

Multi-Trade Maintenance Technician | £38,000–£40,000 + Company Vehicle + Overtim...

Location

United Kingdom , Petersfield

Salary:

38000.00 - 40000.00 GBP / Year

workshop recruitment

Expiration Date

Until further notice

Requirements

Previous experience as a Multi-Trade Maintenance Technician
Strong skills in basic plumbing, carpentry, and painting
Full UK driving licence essential
CSCS card preferred
Good problem-solving and practical maintenance skills
Able to work independently and manage workloads effectively
Strong communication and teamwork skills
Able to pass DBS checks and airside vetting requirements
Comfortable working night shifts and long-distance travel

Job Responsibility

Carry out general handyman and multi-trade maintenance tasks
Complete basic plumbing, carpentry, and painting work
Perform planned preventative maintenance and reactive repairs
Support installations and minor refurbishment projects
Lead jobs on-site and provide guidance to the Maintenance Mate
Ensure all work is completed safely and to a high standard
Travel between airports, train stations, and underground sites
Use PDA systems to manage maintenance tasks and reports

What we offer

Company Vehicle
Overtime
Bonus Scheme
Pension
22 days holiday
Training
Uniform

Fulltime

Manufacturing Engineer - Weld

As a Manufacturing Engineer – Weld, you will support the development, optimizati...

Location

United States , Batesville

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Welding or Industrial Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing subject areas
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of welding is preferred (GMAW, GMAW-P, RSW, GTAW)
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency
Update/create documentation for job instructions, work instructions, and standard operating procedures
Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
commuting benefits

Fulltime

Select Country

Lead Painting Technician

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?