Lead Avionics Verification Engineer Job at Airbus (Bangalore)

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

Subject-Matter Expert Avionics Engineer

Phalanx Griffon (PG) is the Air Force’s open‑architecture airborne node linking ...

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship
Active TS/SCI clearance
High School Diploma plus 20 years of experience
Must have been directly involved with avionics engineering and have focused on this technical area for over 20 years
has published work or work samples showing that they are an expert in this field
have participated in technical presentations/roadshows/conferences as an expert in their respective field
Expert knowledge of MIL‑STD‑1553, ARINC‑429/664, Ethernet (TSN/AFDX), VPX architectures, and timing/synchronization methods
Demonstrated success integrating Type‑1 crypto, SATCOM/RF subsystems, and open mission systems (OMS/UCI, FACE, SOSA)
Hands‑on experience generating airworthiness artifacts and guiding systems through developmental & operational test
Proficiency with avionics E‑CAD and MBSE tools (CAMEO/MagicDraw, Rhapsody, Altium/OrCAD)

Job Responsibility

Define avionics integration schemes that marry Nomad VPX hardware with platform data buses (MIL‑STD‑1553, ARINC‑429/664, Ethernet TSN) and mission computers
Develop interface‑control documents (ICDs), signal‑flow diagrams, and timing budgets
ensure alignment with OMS/UCI messages and cross‑domain guard rules
Lead authoring of AF Form 1067s, E‑series flight‑clearance packages, and safety‑of‑flight analyses
Oversee DO‑254 (hardware) & DO‑178C (software) compliance artifacts where required
Capture avionics models in SysML/CAMEO and link to requirements, verification methods, and hardware part trees
Drive configuration‑control boards, red‑line incorporation, and model synchronization
Specify and validate wiring harnesses, signal conditioning, and power interfaces in the Integration SIL
Troubleshoot EMI/EMC, timing, and protocol issues
guide corrective actions through to flight‑test readiness

Fulltime

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Electrical or Aerospace Engineering
10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
Experience integrating and testing avionics systems
Experience with component specification, supplier interaction, and procurement processes
Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
Experience with wire harness design and connector component selection and sourcing
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
Write, maintain and execute test plans and design verification documents
Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
Work with suppliers, managing their performance to requirements, budget and schedule
Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
This position may require up to 50% travel to both domestic and international locations to support hardware integration

What we offer

health
dental
life
unlimited vacation
401k with match

Fulltime

New

Lead Firmware Engineer - Aerospace

Responsible for designing, developing, verifying, and maintaining safety-critica...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or Computer Engineering and minimum 9 years of prior relevant experience, or Graduate Degree and a minimum of 7 years of prior related experience
Minimum 6 years of prior relevant experience in an engineering discipline with systems engineering principles, including requirements definition, requirements verification, design reviews and documentation, integration, test, and demonstration
Minimum 7 years’ experience with FPGA and firmware design
Hands-on experience designing and developing avionics products, RF, or sensor systems
Experience with Xilinx and Microchip FPGAs along with associated tools (ISE, Vivado, Libero)
Experience with simulation tools (Active HDL/QuestaSim)
Must be knowledgeable in VHDL and/or Verilog RTL coding
Knowledge of DO-254 Airborne Electronic Hardware development lifecycle
Experience with requirements-based verification
Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment

Job Responsibility

Responsible for designing, developing, verifying, and maintaining safety-critical firmware for avionics and embedded systems for TCAS and transponder applications in compliance with DO-254 standards
Work closely with hardware engineers, system architects, and certification authorities to ensure robust design assurance processes are followed throughout the product lifecycle
Involved with multidisciplinary project teams involving mechanical, electrical, digital/analog, RF, firmware, and software engineering in planning, designing, prototyping, and testing of avionics systems
Responsible for mentorship of junior engineers, as well as ensuring the Surveillance product line follows industry best practices for product development
The design focus will include surveillance avionics for Air Transport, as well as General Aviation and emerging platforms, such as Urban Air Mobility (UAM) eVTOL aircraft

Lead Firmware Engineer - Aerospace

Responsible for designing, developing, verifying, and maintaining safety-critica...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or Computer Engineering and minimum 9 years of prior relevant experience, or Graduate Degree and a minimum of 7 years of prior related experience
Minimum 6 years of prior relevant experience in an engineering discipline with systems engineering principles, including requirements definition, requirements verification, design reviews and documentation, integration, test, and demonstration
Minimum 7 years’ experience with FPGA and firmware design
Hands-on experience designing and developing avionics products, RF, or sensor systems
Experience with Xilinx and Microchip FPGAs along with associated tools (ISE, Vivado, Libero)
Experience with simulation tools (Active HDL/QuestaSim)
Must be knowledgeable in VHDL and/or Verilog RTL coding
Knowledge of DO-254 Airborne Electronic Hardware development lifecycle
Experience with requirements-based verification
Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment

Job Responsibility

Responsible for designing, developing, verifying, and maintaining safety-critical firmware for avionics and embedded systems for TCAS and transponder applications in compliance with DO-254 standards
Work closely with hardware engineers, system architects, and certification authorities to ensure robust design assurance processes are followed throughout the product lifecycle
Involved with multidisciplinary project teams involving mechanical, electrical, digital/analog, RF, firmware, and software engineering in planning, designing, prototyping, and testing of avionics systems
Responsible for mentorship of junior engineers, as well as ensuring the Surveillance product line follows industry best practices for product development
The design focus will include surveillance avionics for Air Transport, as well as General Aviation and emerging platforms, such as Urban Air Mobility (UAM) eVTOL aircraft

New

Lead Firmware Engineer - Aerospace

Responsible for designing, developing, verifying, and maintaining safety-critica...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or Computer Engineering and minimum 9 years of prior relevant experience, or Graduate Degree and a minimum of 7 years of prior related experience
Minimum 6 years of prior relevant experience in an engineering discipline with systems engineering principles, including requirements definition, requirements verification, design reviews and documentation, integration, test, and demonstration
Minimum 7 years’ experience with FPGA and firmware design
Hands-on experience designing and developing avionics products, RF, or sensor systems
Experience with Xilinx and Microchip FPGAs along with associated tools (ISE, Vivado, Libero)
Experience with simulation tools (Active HDL/QuestaSim)
Must be knowledgeable in VHDL and/or Verilog RTL coding
Knowledge of DO-254 Airborne Electronic Hardware development lifecycle
Experience with requirements-based verification
Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment

Job Responsibility

Responsible for designing, developing, verifying, and maintaining safety-critical firmware for avionics and embedded systems for TCAS and transponder applications in compliance with DO-254 standards
Work closely with hardware engineers, system architects, and certification authorities to ensure robust design assurance processes are followed throughout the product lifecycle
Involved with multidisciplinary project teams involving mechanical, electrical, digital/analog, RF, firmware, and software engineering in planning, designing, prototyping, and testing of avionics systems
Responsible for mentorship of junior engineers
Ensuring the Surveillance product line follows industry best practices for product development

Chief Engineer, Space Missions

We have an exciting opportunity for a Chief Engineer, Space Missions located at ...

Location

United States , Littleton

Salary:

222000.00 - 280000.00 USD / Year

Redwire Space

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Aerospace Engineering, Systems Engineering, Electrical Engineering, Mechanical Engineering, or related field
20+ years of experience in spacecraft or complex aerospace system development
Demonstrated experience serving as a Chief Engineer, Lead Systems Engineer, or equivalent senior technical authority
Deep understanding of full spacecraft system architecture including mission design, avionics, power, GNC, software, structures, thermal, and integration & test
Proven ability to solve complex, cross-disciplinary technical problems and adjudicate difficult engineering tradeoffs
Experience leading technical execution through SRR, PDR, CDR, qualification, launch readiness, and on-orbit operations
Eligible for a U.S. security clearance

Job Responsibility

Serve as the senior technical authority across the Space Missions portfolio, ensuring technical integrity, rigor, and mission assurance
Allocate time across programs to address the most complex, high-risk technical challenges, providing hands-on technical leadership and independent technical judgment
Drive systems thinking throughout the full spacecraft lifecycle, ensuring cohesive architecture, requirements flow down, interfaces, and verification closure
Lead and participate in independent technical reviews, gate reviews, readiness assessments, anomaly and failure resolution efforts, and design decisions, bringing cross-program insight and historical context
Establish and uphold engineering principles, standards, and best practices across spacecraft, products, and disciplines
Mentor and coach technical leaders and Responsible Engineers
Provide technical oversight during proposal development, architecture definition, and early mission concept studies
Act as a trusted technical interface to customers, partners, and internal executives

What we offer

Highly competitive benefits package
Commitment to core values of Integrity, Innovation, Impact, Inclusion, and Excellence

Fulltime

Team Lead, Avionics Production

ICEYE is seeking a Avionics Production Team Lead to take ownership of all electr...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electronics, Electrical, Aerospace Engineering, or a related technical field
5+ years of hands-on experience in electronics production, integration, or testing—preferably in aerospace or other high-reliability environments
Proven track record of leading technical teams in a production or test environment
Experience in functional and system-level testing of Complex systems
Experience working with test benches, tooling, and production documentation
Experience in root cause analysis, diagnostics, and fault isolation of electronic systems
Excellent collaboration and communication skills—especially with Engineering, AIT, and Quality teams
Strong mindset of ownership, quality, structure, and continuous improvement
Exposure to Lean manufacturing, 6S, or similar process improvement methodologies
Structured and quality-driven, but thrives in a dynamic, fast-paced production environment

Job Responsibility

Lead and coordinate the daily activities of the electronics production team, ensuring high-quality and on-time delivery of assemblies and tests
Oversee the verification of incoming PCBAs and ensure readiness of electronic components for integration
Supervise electrical subsystem assembly processes, including harness installation, interface checks, and component integration
Own the planning, execution, and reporting of subsystem-level functional tests and inspections
Lead avionics testing at the satellite level, ensuring all onboard electronics perform reliably in end-to-end configurations—executed together with your team and in close collaboration with others in a matrix structure
Ensure test benches, tools, and setups are maintained, functional, and compliant with safety and quality standards
Develop and maintain work instructions, test procedures, and checklists in collaboration with AIT Engineering and Quality teams
Train and mentor technicians on best practices in electronics assembly, handling, ESD protection, and fault diagnostics
Drive process improvements to increase throughput, reduce rework, and enhance traceability and documentation
Collaborate closely with Engineering, Production Engineering, and AIT Engineering teams to support troubleshooting and root cause analysis during integration

What we offer

Occupational healthcare, occupational, and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus

Fulltime

Lead Avionics Verification Engineer

Airbus

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead Avionics Verification Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Hardware Integration Engineer

Lead Firmware Engineer - Aerospace

Lead Firmware Engineer - Aerospace

Lead Firmware Engineer - Aerospace

Chief Engineer, Space Missions

Team Lead, Avionics Production

Lead Avionics Verification Engineer

Airbus

Location:India , Bangalore

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead Avionics Verification Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Hardware Integration Engineer

Lead Firmware Engineer - Aerospace

Lead Firmware Engineer - Aerospace

Lead Firmware Engineer - Aerospace

Chief Engineer, Space Missions

Team Lead, Avionics Production

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 17, 2026