Layup Operator Job at Owens Corning (North Platte)

Layup

Operate machinery required for particular position in a safe and efficient manne...

Location

United States , Fort Mill

Salary:

Not provided

Owens Corning

Expiration Date

Until further notice

Requirements

Read interpret ticket
Basic reading and writing skills
Ability to add and subtract fractions and whole numbers, convert fractions to decimals
Proficient at reading/interpreting, quality specs, proper door construction, door types, core types, stile/rail/block types
High level of dexterity and skill to assemble doors, perform visual quality checks, and comprehend build construction specs, must work well as a team with Front Man
Ability to lift up to 50 lbs, bending, twisting, stooping, and standing throughout your shift
Must work at a fast pace and handle multiple parts that have glue on them
Strong eye/hand coordination
Standing for long continuous hours
Attention to detail of build construction and accuracy of material placement

Job Responsibility

Operate machinery required for particular position in a safe and efficient manner, to include training of new and existing operators in the carrying out of their duties
Inspect product for defects and take appropriate action as per work instructions, monitor Quality Technician for consistency
Carry out measurements and weight checks
Assemble product as per instructions with a focus on quality and safety
Practice Masonite Lean Manufacturing Techniques including 5S+1
Communicate efficiently with other employees and the leadership team in order to ensure quality product is made timely
Read and interpret list counts and complete all departmental paperwork correctly and timely
Perform weekly EHS audits
Participate in Safety Kaizens and Masonite Plant Kaizens
Help create/implement poke yokes for quality issues

Fulltime

Technician

We are seeking a skilled and reliable Windmill Blade Operator to join our team. ...

Location

India , Viralimalai

Salary:

Not provided

Randstad

Expiration Date

July 13, 2026

Requirements

Gender - Only Male
Education – SSLC, PUC, ITI, Diploma & BE or Btech ( EEE or ECE )

Job Responsibility

operating and maintaining the equipment used in the manufacturing process of wind turbine blades, ensuring the production of high-quality components for our wind energy projects

Fulltime

Windmill Blade Operator

Greetings from Randstad! We are seeking a skilled and reliable Windmill Blade Op...

Location

India , Viralimalai

Salary:

Not provided

Randstad

Expiration Date

July 11, 2026

Requirements

SSLC, PUC, ITI, Diploma & BE or Btech ( EEE or ECE )
7 years experience

Job Responsibility

Operating and maintaining the equipment used in the manufacturing process of wind turbine blades
Ensuring the production of high-quality components for wind energy projects
Layup, Bonding, Molding NCR, Repairs, EOT, MOT, Quality, NDT, Prefab

Fulltime

Material prep

BE PART OF OUR DIFFERENCE. Owens Corning, global in scope - human in scale. We’...

Location

United States , North Platte

Salary:

22.55 USD / Hour

Owens Corning

Expiration Date

Until further notice

Requirements

Excellent hand eye coordination
Excellent ability to read schedule/tickets and determine proper material usage
Knowledge of all door skins
Strong knowledge of different types of defects.
Use a tape measure to 1/32"
Ability to flip door skins weighing up to max 20 lbs
Strong ability to scan door skin surfaces and detect defects in fast paced environment
Highly familiar with build constructions
Quick thinker
Strong math skills

Job Responsibility

Operate machinery required for particular position in a safe and efficient manner, to include training of new and existing operators in the carrying out of their duties.
Inspect product for defects and take appropriate action as per work instructions
Assemble product as per instructions with a focus on quality and safety.
Communicate efficiently with other employees and the leadership team in order to ensure quality product is made timely
Read and interpret list counts and complete all departmental paperwork correctly and timely
Help create/implement poke yokes for quality issues
Read, understand and follow production schedules
Set up and adjust equipment
Gather materials as needed
Operate motorized equipment (ie forklift, Scissor lifts, etc) as needed

What we offer

Competitive compensation, quarterly bonus plan, and a substantial benefits package including insurance (medical/dental/vision/life/disability/supplemental offerings), 401k , liberal paid time off (vacation, personal floating and standard holidays), Employee Assistance Services, Stock Purchase Program

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (highly desired)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Continuous professional development within a global leader in aerospace

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Experience with Hot Debulking (highly desired)
Knowledge of Autoclave curing processes and bagging techniques
Knowledge of Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in one or more of the following specific technologies: Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (This is a highly desired qualification)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site, ensuring alignment with program goals regarding production rate, recurring costs, and quality
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking desirable
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods to ensure structural integrity
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs), ensuring global standards are adapted and maintained for local industrial application
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

Composite Technician I

The Composite Technician I works with new aircraft parts, using oven processes, ...

Location

United States , Meridianville

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

Composites Certification from accredited college or 1 year experience
High School Diploma / GED or equivalent required
Precision Tool experience (i.e. Dial Calipers, Hot Bonder, Torque Wrenches, Vacuum Pump, etc.)
Must be a U.S. Citizen
Must be willing to reside in Huntsville AL area
Must have or be capable of obtaining a US Department of Defense (DoD) security clearance
Ability to work overtime when required
Ability to work with shop tools and equipment used in composite layup and assembly
Ability to demonstrate an understanding of work orders, blueprints, and lay-up charts
Read and interpret drawings and technical manuals

Job Responsibility

Perform lay-up techniques that include pre-pregs or wet lay-up, cutting, bagging, and/or trimming operations or machine operations
Receive detailed written instructions from the supervisor, lead technician, or an engineer
Layout, pre-fits, assembles and casts polyurethane and like material on a variety of molds and surfaces
Load and operate presses, ovens, and autoclaves
Select tooling and materials compatible with the processing techniques identified in the work instructions
Employee will be required to handle regulated and hazardous wastes and materials
Safely work in a team environment rigging, lifting, and transporting large parts and equipment
Apply your skill in the use of production tools
Use computers to record data (excel), track time (Auto-time)
Perform casting of materials to fabricate parts and/or for repair applications

Fulltime

Select Country

Layup Operator

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Layup Operator

Layup

Technician

Windmill Blade Operator

Material prep

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Composite Technician I

Our AI answers in your language