Launch Process Technician Job at General Motors (Concord)

Commercial Launch Technician

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

35.00 - 65.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

3+ years experience working with complex systems
Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI’s
Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
Familiarity with torque tools and mechanical assembly
Ability to read PCB and Harness schematics
Full system architecture diagnostic experience and organized diagnostic processes
Ability to remove and replace mechanical components up to 50lbs
Great attitude and excited to face challenges

Job Responsibility

Responsible for the physical setup of humanoid robots and necessary site infrastructure at new commercial or residential locations
Perform routine maintenance and inspections of the humanoid robot fleet
Proficient in troubleshooting mechanical, electrical and software-based issues
Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
Verify use-case stability on-site and provide direct, actionable feedback to the Development teams to drive product improvements
Maintain detailed and accurate records of all maintenance and repairs
Develop tools and document diagnostic procedures for process improvement
Heavy travel to customer or development partner sites, up to 75%
Ability to follow assembly documentation
Ability to work under short timelines when needed

Fulltime

Launch Pad Operations Technician

As a Launch Operations Technician, you will join our team on the beautiful arcti...

Location

Norway , Andenes

Salary:

Not provided

Isar Aerospace

Expiration Date

Until further notice

Requirements

Completed vocational training in a mechanical or technical position
Excellent teamwork
Knowledge of gas/fluid bolting techniques
Spatial awareness and good technical understanding
High attention to detail and quality
Ability to work under pressure and in a highly dynamic environment
Foundational knowledge of computer and software applications
Well organized mode of working
Physical dexterity is required as working in confined spaces is necessary (including the ability to lift 25kg without assistance)
Driver’s license class B (3.5t)

Job Responsibility

Keep the ground infrastructure and machinery (Pad, AIT, workshops, etc.) operational, ready to test and launch, and compliant with regulatory requirements by developing and executing maintenance plans
Implement changes to and continuously improve our infrastructure and processes to ensure safe, smooth and efficient operations
Support test and launch campaigns of our Spectrum vehicle form preparing the pad for operation, over hands-on trouble shooting, to operating parts of the ground systems
Manufacture custom mechanical parts or assemblies for usage in our facilities
Take care of our workshops and equipment
Join the industrial safety/first responder team

What we offer

Employee Participation Program: Share in our success through our virtual company share program
6 weeks of vacation
Subsidised lunch
Relocation support: Benefit from our relocation bonus with deductible expenses up to an agreed amount
Wellness allowance: Stay healthy and fit with our yearly allowance for wellness activities (e.g., Gym, Massages)
Individual learning allowance: Grow your skills with an individual learning budget granted after the probation period
Physical and mental well-being: Access via OpenUp the online support from certified psychologists and lifestyle experts at no cost to you and your family

Fulltime

Civil System Engineer Iii- Heavy Equipment

Performs a variety of engineering assignments to support project development, de...

Location

United States , Kennedy Space Center

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s or master’s degree in engineering
5+ years’ experience in engineering discipline as identified in purpose & scope
Knowledge of industry standard computer software for the position (i.e. CADD, AutoCAD, MicroStation, PLC interface software, etc)
Capable of using spreadsheets, word processing and standard Microsoft Office software to include Excel, Word, PowerPoint and Visio
Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals
Ability to read and understand schematics & blueprints
Strong ability to use data and analysis to make fast data-driven decisions
Ability to exercise sound judgement and reason
Ability to write routine reports and correspondence
Ability to speak effectively before groups of customers or employees of the organization

Job Responsibility

Perform a range of maintenance and sustaining work step development, analysis, or review tasks with little to no supervision and works on problems of diverse scope where analysis of data requires evaluation of identifiable factors
Provide onsite technical guidance as needed for new or existing equipment installation and/or modifications that require heavy equipment expertise and demonstrates good judgment in selecting methods and techniques to come to a solution
Stay up to date with emerging technologies and industry trends related to heavy equipment
Revise and add new asset information in Maximo database for assigned equipment per MAR (Maintenance Action Request) process
Develop and maintain job plans and preventative maintenance schedules for assigned assets in accordance with launch and processing operations, NASA-STD-5008B and industry standard requirements
Address and justify preventive maintenance deferrals of assigned assets
Conduct site visits to investigate system problems, propose solutions and provide recommendations to restore assets
Propose and develop improvement plans to address systemic problems and improve overall performance of the assets (improvements and/or modifications)
Support shop technicians in troubleshooting issues related to assigned assets as needed
Provide and review technical expertise for technical anomalies as they arise

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Tsc Technician Sr

The Technical Service Center evaluates, repairs, and maintains Volkswagen Group ...

Location

United States , Auburn Hills

Salary:

Not provided

Volkswagen AG

Expiration Date

Until further notice

Requirements

7+ years’ automotive diagnostic & repair experience including high voltage vehicle repair
Degree or certificate in Automotive Technology
Hi-level Volkswagen Audi Technical Training
ASE Master Certification
Extensive Volkswagen and/or Audi product and technical knowledge
Extensive knowledge of Volkswagens and/or /Audi diagnostic processes
Hybrid & High-Voltage battery diagnostic and repair experience
Advanced level of ODIS diagnostic experience
ASE technical certifications
Valid Driver’s License

Job Responsibility

Repair, test, maintain, and update VW /Audi vehicles to the latest technical level
Repair vehicles when Dealer personnel, internal organizations, field technical support and other corporate locations are not able to execute repairs
Communicate problems and solutions to VWGoA/VW-AG Quality departments utilizing department specific documentation
Test vehicles under varying conditions to determine and document cause of condition
Evaluate and repair company buy-back vehicles
Verify customer complaints in the actual field environment
Provide cross functional assistance to other groups within AoA, VWoA, Audi/VW AG, vendors and associations
Evaluate new diagnostic systems and procedures
verify GFF and service publications
Perform, evaluate and develop repairs according to newly developed repair information

Fulltime

Quality Technician

The Quality Assurance Technician is responsible for maintaining quality assuranc...

Location

United States , Winchester

Salary:

Not provided

Owens Corning

Expiration Date

Until further notice

Requirements

Associate Degree Preferred will consider Tech School or High School graduates with the right skills and experience
Prefer ASQ certifications (CQI & CQT) or ability to obtain certifications within 1 year
Prefer Yellow Lean & Yellow Six certification or ability to obtain certification in 1 year
Kaizen Facilitator certification highly desired
2-4 years of manufacturing experience (millwork, automotive or metals preferred)
Experience with auditing and inspection of product and processes
Ability to be a certified Forklift operator
Regular attendance and timeliness
Follow all operational and safety SOP's
Requires strong knowledge of (FMEA, PDR's, RMA, FRC, MRB's, PPAP's, & R&R studies

Job Responsibility

Participates in internal process and product audits
Perform various levels of inspection: incoming receiving, in-process manufacturing and finished goods process audit
Input data pertinent to quality database systems for capturing, analyzing, and providing timely and accurate reporting and corrective actions
Determine from blueprint and specifications the dimensions, finishes, processes and methods of inspection, precision measuring instruments, gauges, tools and set-up required for checking surfaces and variations
Helps in the development an application of effective quality product and process plans to ensure full compliance of product standards, specifications, and quality system requirements
Participate in the implementation of product quality improvement initiatives to reduce process variation and prevent defects
Use quality tools to troubleshoot, identify and analyze problems to the true root-cause level, and work with the appropriate teams to implement solutions
Support activities to build quality into the product through process and system improvements, proactive planning, and responsive reactions to emergencies
Actively lead Yellow Lean & Yellow Six projects to lean out processes and improve overall COQ performance
Lead Kaizen events on manufacturing floor with crosses functional teams

Fulltime

Senior Staff Engineer, NPI

Senior Engineer, Global NPI, provides technical leadership and execution oversig...

Location

United States , Shakopee

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Bachelor's Degree in related curriculum such as Engineering with 8-10 years of work experience in relevant or related field
Proficient in FBC, SAP, Lean Six Sigma, SharePoint

Job Responsibility

Lead all phases of New Product Introduction (NPI), from concept through production launch
Define manufacturing strategies to ensure scalability, yield, and cost targets are achieved
Ensure alignment between product design and manufacturing through advanced DFM guidance
Drives technical leadership in optical test, interferometry, and continuity verification
develops and implements advanced processes leveraging emerging technologies and external partners, ensuring scalable deployment across sites without compromising quality or customer performance
Leads functional business analysis for Fiber Barcode (FBC) systems
defines software requirements and strategy to ensure product compliance, drives development activities, and validates system performance for robustness and reliability
Provides direction across all NPI phases, ensuring execution aligns with PDP requirements, procedures, and regulatory standards
coordinates with R&D and PLM on schedules, resources, and capital planning while driving process capability, yield, and cost performance through PFMEA, VSM, and throughput analysis
Specifies and leads implementation of automation equipment for fiber manufacturing systems, including concept, design, build coordination (internal and external), validation, and operator readiness

Fulltime

Principal Engineer

Baxter Healthcare Corporation is seeking a Principal Engineer with the following...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Operational Technician

Elevate Your Career: Operational Technician (Pharmaceutical) 💊 Are you looking ...

Location

Canada , Mississauga

Salary:

19.00 - 22.00 USD / Hour

Randstad

Expiration Date

July 12, 2026

Requirements

2–3 years as a Machine Operator in a production environment
Mechanically inclined and comfortable using tools for troubleshooting and changeovers
Must be able to work a weekly rotating shift schedule
Strong attention to detail and proven technical competency
A proactive, self-managed team player with a 'can-do' attitude
Ideal for someone looking to launch a long-term career in the Pharmaceutical industry

Job Responsibility

Operate, maintain, and fine-tune state-of-the-art process equipment to ensure peak performance
Lead equipment changeovers and perform preventative/predictive maintenance to keep our facility running smoothly
Ensure all packaging and production activities meet strict GMP, safety, and quality standards
Use your eye for detail to complete production logs and even help write or revise SOPs (Standard Operating Procedures) for new processes
Utilize industry-standard software like SAP and IMS for daily computer-related tasks
Act as a problem-solver by identifying and fixing equipment or process issues on the fly

What we offer

4% vacation pay on every single cheque
Access to private gym, basketball, and tennis courts
On-site cafeteria with dedicated chefs preparing fresh meals daily
Fully transit-accessible location
Ongoing training and professional development
Weekly rotational shifts

Select Country

Launch Process Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?