CrawlJobs Logo

Junior Lab Test Engineer

airbus.com Logo

Airbus

Location Icon

Location:
Spain , Getafe

Category Icon

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided

Job Description:

An opportunity for a Lab Test Engineer in the field of Communication Systems (Connectivity, Mission and Safety Comms) has arisen within Airbus Defence and Space in Getafe. The selected candidate will join the Flight & Integration Test Centre. The roles and responsibilities lay within the IV&V activities with the final target of demonstrating the correct system’s performance providing the evidences needed for the subsequent testing and clearance processes. The testing is performed at different levels, from Virtual Testing environments up to Laboratory Subsystem and Global System Integration Rigs but eventually giving also support to on-Aircraft Ground & Flight testing if required. The team gives support to all the different programs within the Spanish Airbus Defence and Space portfolio.

Job Responsibility:

  • Analysis of technical documentation of Systems and Test Requirements documentation to build up a coherent set of Rig Test Cases/Procedures
  • Creation of the Requirements Specification of Rigs and their associated Validation Procedures
  • Creation of all other Test Datasets necessary prior to the run time test execution
  • Execution of the required test steps as described in the Test Procedures
  • Analysis of systems' behavior and creation of Test Reporting documentation
  • Declaration of Equipment/System Problem Reports and management of their lifecycle
  • Management of associated tools for controlling and reporting processes
  • Specification of ad-hoc Test Tools

Requirements:

  • Educated in a Telecommunications, Industrial-Electronics Engineering or Aeronautical Degree (or a related discipline)
  • At least 2 years of experience in the mentioned systems
  • Technical knowledge on the COMMS Systems Under Test (modes of operation, performance, functionalities, limitations, etc)
  • Requirements’ interpretation, partitioning and allocation to build-up segregated Test Procedures and any other Test Data Set
  • Systems’ behavior assessment derived from test results, including problem investigation skills
  • Technical knowledge on the Lab Equipment, both Standard or Specific to Datalinks or Connectivity Systems
  • Technical knowledge on Test Support Systems controlling the execution sessions and associated capabilities
  • Advanced level in English and Spanish, technical and general
  • 0-3 years of experience in similar roles and similar systems
  • Pro-active approach to problem solving and decision making
  • Open-minded, team spirit minded, rigorous and autonomous with a can-do mindset
  • Ability to work under strict timescales and milestones as part of an integrated and multifunctional team
  • High adaptability to work on new topics, new programs with good networking skills
  • NATO security clearance in force (or equivalent) or at least being eligible for it
  • Be eligible for ITAR and National Export Control authorisations
What we offer:
  • Vacation days plus additional days-off along the year
  • Attractive salary
  • Hybrid model of working when possible, promoting the work-life balance
  • Collective transport service subject to working calendar/home location
  • Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants
  • On-site facilities (among others): free canteen, kindergarten, medical office
  • Possibility to collaborate in different social and corporate social responsibility initiatives
  • Excellent upskilling opportunities and great development prospects in a multicultural environment
  • Option to access special rates in products & benefits

Additional Information:

Job Posted:
February 23, 2026

Expiration:
April 20, 2026

Employment Type:
Fulltime
Work Type:
Hybrid work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Junior Lab Test Engineer

Staff Software Engineer - Integrated Test

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
168000.00 - 200000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 10+ years of experience in simulation software development and systems integration
  • Bachelor's or higher degree in Aerospace, Software, Electrical Engineering, Computer Science, or a related field
  • Seasoned technical lead for an engineering team
  • providing guidance in planning and execution
  • Advanced proficiency in C/C++ and Python
  • Very experienced in MATLAB/Simulink
  • Extensive experience developing real-time HIL test infrastructures
  • Proven ability to develop simulation tools with a focus on usability, modularity, and performance
  • Expert of communication standards and protocols (RS-422/485, CAN/CAN-FD, ARINC-429, Ethernet, TCP/IP, USB etc…)
  • Experience prototyping Graphical User Interfaces based on user feedback
Job Responsibility
Job Responsibility
  • Architect and lead the team managing Archer’s lab integration environments supporting validation and verification activities, handling quality evaluations, human factor evaluations and test pilot training
  • Collaborate cross-functionally with internal groups and suppliers to integrate, instrument and maintain configuration of simulation models in a real-time, integrated hardware-in-the-loop environments
  • Own end-to-end configuration of simulation environments (e.g., SIL, HIL, CeRT, Iron Bird), including data analysis and simulation correlation with flight test data
  • Develop and optimize simulation pipelines including CI/CD integration for automated deployment, execution, and monitoring
  • Integrate third-party software/hardware systems into cohesive simulation architectures
  • Set technical standards, provide mentorship, and foster a collaborative and high-performance engineering culture
  • Guide the design and build of graphical user interfaces to control the real-time simulation environment
  • Lead task decomposition, technical planning, and debugging of complex issues across real-time and distributed systems
  • Influence tool architecture in support of lab configuration and automation
  • Fulltime
Read More
Arrow Right

Senior Test Engineer Analyst

Phalanx Griffon (PG) is the Air Force’s next‑gen airborne node connecting warfig...
Location
Location
United States , Dayton
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • A High School Diploma plus 20 years of experience with proper certifications, a Bachelors degree in an applicable discipline and 15+ years of DoD system‑of‑systems test engineering, including lab‑to‑flight progression, or a Masters degree plus 12 years of experience
  • Active TS/SCI clearance
  • Proven leadership of large‑scale DT/OT efforts for avionics, communications, or C2 systems
  • Hands‑on with test automation frameworks, instrumentation, and data‑analysis tools (MATLAB, Pandas, JMP, or similar)
  • Familiarity with MIL‑STD‑810/461, RCC 324/125‑15, or comparable environmental and EMI/EMC standards
Job Responsibility
Job Responsibility
  • Build the Program‑level Test & Evaluation Master Plan (TEMP) that links Nomad hardware, Smith software, and Watch ops‑support elements to CJADC2 mission threads and MR 2 exit criteria
  • Define DT/OT entrance & exit gates, traceability matrices, and milestone metrics within the Integrated Master Schedule
  • Design lab architectures replicating platform power, data, and environmental interfaces
  • oversee daily ops, configuration control, and security accreditation
  • Implement automated regression suites (Python/Robot Framework, Jenkins, Ansible, IXIA/Spirent) covering functional, performance, and cyber‑resilience tests
  • Lead ground and flight‑test events: draft test cards, hazard analyses, Interim Authorizations To Test (IATT), and Safety‑of‑Flight packages
  • Serve as lead flight‑test engineer or ground‑test conductor, capturing telemetry, logs, and spectrum traces
  • troubleshoot anomalies in real time
  • Perform statistical analysis of throughput, latency, crypto handshake times, SWaP‑C impacts, and mission‑effect metrics
  • Produce concise after‑action reports, deficiency reports (DRs), and recommendations for corrective action to IPTs and senior USAF stakeholders
  • Fulltime
Read More
Arrow Right

Product Engineer PRMO Manufacturing

This role has been designed as ‘Onsite’ with an expectation that you will primar...
Location
Location
United States , Aguadilla
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering or equivalent
  • Typically 4-6 years experience
  • Proficient in using engineering tools and software for testing, design, and evaluation of products and manufacturing processes
  • Strong analytical and problem-solving abilities with a solid understanding of material properties, hardware design, and electrical component manufacturing
  • Skilled in applying empirical analysis, modeling, and testing methodologies to validate product designs and ensure specification compliance
  • Excellent written and verbal communication skills, with fluency in English and the local language
Job Responsibility
Job Responsibility
  • Partners with R&D and New Product Introduction (NPI) Supply Chain groups to successfully introduce new products into world-wide production
  • Interfaces with R&D, Design Labs, Test Engineering and reliability engineering to solve product quality or yield problems
  • Responsible to sustain products through cost reductions seeking yield improvements
  • Analyzes samples of defective units/sub-assemblies, reports the results to the appropriate design engineering, manufacturing engineering, test engineering and quality engineering team(s) as well as to the manufacturing group or area and/or vendor where the issue occurred, and recommends or implements changes to the product or process as applicable
  • Drives successful New Product Introductions (NPIs) by collaborating with process, materials, and test engineering teams to implement externally developed product designs into local manufacturing
  • Leads and coordinates activities with internal and outsourced development and manufacturing partners to support global production from new product introduction (NPI) through end-of-life
  • Analyzes defective units or subassemblies to identify root causes
  • incorporates insights from customer feedback, manufacturing data, test results, and quality processes
  • Communicate findings and recommendations to key stakeholders
  • partners with management and cross-functional teams to implement changes that reduce defects, enhance quality, and lower costs
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Senior Test Technician

Responsible for supporting Timing Drive System Tuning test, including engine set...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
borgwarner.com Logo
BorgWarner
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Junior college or above in Mechanical Engineering or Mechanical Engineering Technology
  • More than 1 year working experience in the automotive field required, typically power train related
  • Engine assemble skills required
  • Adapting to business work on OEM site required
  • Familiar with test equipment operation, calibration and maintenance/ Troubleshooting of rotating mechanical systems and low voltage measurement systems.
Job Responsibility
Job Responsibility
  • Responsible for test fixture setup, timing drive system setup, sensors installation
  • Responsible for testing instruments and software debugging
  • Conduct data records and initial analysis
  • Conduct communication with customers to confirm the engine and fixture status
  • Responsible for test samples and test fixtures management
  • Collaborate with other Technicians and Engineers to perform required tests
  • Support team leader to do lab quality management and continuous improvement
  • Responsible for lab 5S
  • This position will adhere to safety rules, practices and training as outlined in the BorgWarner Safety Policy Manual
  • Meet EHS responsibilities requirement
  • Fulltime
Read More
Arrow Right

Test Engineer Intern

As a Test Engineer Intern, you will be responsible for test lab activities as pa...
Location
Location
United States , Claremont
Salary
Salary:
Not provided
commscope.com Logo
CommScope
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Actively pursuing a bachelor’s (upcoming sophomores, juniors & seniors) or master’s degree in the following Mechanical / Electrical disciplines from an accredited university
  • Proven strong academic performer with a minimum GPA of 3.0
  • Mechanical / Electrical Engineering Background
  • Knowledgeable of lab instrumentation (e.g., digital mulitmeters, soldering, tensile tests)
  • Must possess unrestricted work authorization and not require future sponsorship
Job Responsibility
Job Responsibility
  • Gaining knowledge of industry standards
  • Conducting mechanical, electrical, and transmission testing
  • Optimizing hardware and software test platforms
  • Authoring Standard Work Instructions
What we offer
What we offer
  • On-the-job training
  • Professional development workshops
  • Executive speaker series
  • Networking and social events
Read More
Arrow Right

Product Engineer Manufacturing & NPI

Partners with R&D and New Product Introduction (NPI) Supply Chain groups to succ...
Location
Location
Puerto Rico , Aguadilla
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or Master's degree in Electrical Engineering, Electronical Engineering, Computer Engineering or Computer Science
  • Typically 4-6 years experience as a Product Engineer, manufacturing, BOM's, NPI, Project Management, Line Support
  • Excellent written and verbal communication skills, with fluency in English and the local language
  • Proficient in using engineering tools and software for testing, design, and evaluation of products and manufacturing processes
  • Strong analytical and problem-solving abilities with a solid understanding of material properties, hardware design, and electrical component manufacturing
  • Skilled in applying empirical analysis, modeling, and testing methodologies to validate product designs and ensure specification compliance
Job Responsibility
Job Responsibility
  • Partners with R&D and New Product Introduction (NPI) Supply Chain groups to successfully introduce new products into world-wide production
  • Interface with R&D, Design Labs, Test Engineering and reliability engineering to solve product quality or yield problems
  • Responsible to sustain products through cost reductions seeking yield improvements
  • Analyzes samples of defective units/sub-assemblies and reports results to appropriate teams
  • Drives successful New Product Introductions (NPIs) by collaborating with process, materials, and test engineering teams
  • Leads and coordinates activities with internal and outsourced development and manufacturing partners to support global production from new product introduction (NPI) through end-of-life
  • Serves as the primary representative of the product engineering team for complex development and manufacturing initiatives
  • Provides mentorship and technical guidance to junior team members
What we offer
What we offer
  • Health & Wellbeing benefits
  • Personal & Professional Development programs
  • Unconditional Inclusion environment
  • Fulltime
Read More
Arrow Right

Senior Thermal Engineer

We are looking for an experienced Senior Thermal Engineer to support the design,...
Location
Location
United States , Sunnyvale
Salary
Salary:
92700.00 - 187500.00 USD / Year
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering (BSME required)
  • 5+ years of engineering experience, including 4+ years in thermal engineering for electronics
  • Requires strong proficiency in air‑cooled electronics, fan selection, airflow optimization, and heat‑sink technologies
  • Proficiency with CFD tools (FloTHERM strongly preferred)
  • Working knowledge of CAD tools for model review
  • Strong analytical, problem-solving, and communication skills
  • Hands-on experience with thermal testing and lab equipment
Job Responsibility
Job Responsibility
  • Perform detailed thermal analysis and CFD simulations (FloTHERM preferred
  • ICEPAK acceptable) for electronic systems and components
  • Develop and specify thermal solutions including heat sinks, vapor chambers, heat pipes, fans, and thermal interface materials (TIMs)
  • Conduct thermal feasibility studies, airflow analysis, and pressure drop evaluations
  • Review mechanical designs (SolidWorks, Pro/E/Creo) to ensure proper integration of cooling solutions
  • Create and execute thermal test plans
  • supervise lab testing and interpret results
  • Collaborate with mechanical, electrical, and system engineers to resolve thermal issues and ensure compliance with requirements
  • Prepare clear technical reports and communicate findings to engineering teams
  • Provide guidance to junior engineers and support cross-functional development activities
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Senior/lead Test Engineer

As Padran Information Technologies, we are looking for teammates who are focused...
Location
Location
Turkey , İstanbul;İzmir
Salary
Salary:
Not provided
padran.com Logo
Padran Information Technologies Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • MS/BS in Computer/Electrical/Electronics Engineering or similar field
  • Knowledge of test methodologies with at least 5 years of experience in developing and implementing end-to-end software product testing approaches
  • Networking Experience (TCP/IP, Wi-Fi, AWS, LAN/WAN) - Good understanding of general networking protocols (IEEE 802.11ac/ax/be, TR-398, etc.)
  • Experience with basic scripting languages (Python & Bash), Linux, Postman, Soap UI and Software Testing Methodologies
  • Experience with Mobile Application Testing
  • Familiarity working in Agile and cross-functional scrum teams
  • Good understanding of Software Test Management tools such as Jira, Xray, Confluence
  • Excellent analytic and problem-solving skills and Excellent team player
  • Mentor and guide junior team members of the test team, providing training and support as needed
  • Collaborate with cross-functional teams to prioritize testing efforts, resolve issues, and ensure alignment with project goals
Job Responsibility
Job Responsibility
  • Engage in discussions and collaboratively establish test strategies with the development team and product/program managers to assess the impact of a deliverable product or version
  • Review the specs & requirements, have a good understanding of the features, develop precise test cases and revise test plans accordingly
  • Design, implement and execute functional, stress and longevity tests from an end-to-end perspective
  • Identify, document, and track software defects, working closely with the development team to ensure their resolution
  • Utilize complex diagnostic and measurement tools such as Octobox, ixia, iperf, CD Router, Wireshark, etc.)
  • Provide clear defect definitions and reports to prevent miscommunication and streamline the resolution process
  • Guide the automation team to increase automation coverage by creating proper test automation development requests
  • On-time delivery of required QA facilities including detailed Test Report, Issue Analysis
  • Make sure products are being deployed on-scope and on-quality
  • Managing and maintaining the test houses and Wi-fi labs
What we offer
What we offer
  • Opportunity to work with leading companies in Turkey
  • Opportunity to use industry-leading technologies with our business partners Microsoft, IBM, AWS and Open Text
  • Career development and certification opportunities as an ISTQB accredited training center
  • Fulltime
Read More
Arrow Right