CrawlJobs Logo

Junior Engineer (Mechanical)

sf.gov Logo

City and County of San Francisco

Location Icon

Location:
United States , San Francisco

Category Icon
Category:
IT - Administration

Job Type Icon

Contract Type:
Employment contract

Salary Icon

Salary:

113282.00 - 137670.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

Under supervision, performs beginning-level engineering work in the field and the office following established engineering methods and procedures; assists professional engineers in tasks requiring advanced engineering skill and/or judgment; makes contacts with the public, contractors, and others on engineering matters; gathers, prepares, and maintains engineering data, records, and reports; applies engineering principles and practices to civil, mechanical, electrical, environmental, or transportation engineering problems; performs related duties as required. The Junior Engineer may direct the work of technical and/or clerical staff.

Job Responsibility:

  • Prepares or assists in preparing studies, calculations, designs, drawings, sketches, and plans using AutoCAD and other software tools
  • Makes field inspections of existing structures and sites to determine necessity for future construction, repair, or maintenance
  • conducts preliminary field studies and surveys and collects data relative to the preparation of designs and drawings
  • Makes regular field inspections of construction and repair projects in progress to ensure conformance with plans, specifications, and codes
  • checks and records work progress at various construction sites
  • Prepares or assists in the preparation of reports, contract specifications, lists of materials, cost estimates, schedules, and progress payments
  • Prepares or assists in the preparation of departmental reports and reports concerning field conditions, the progress of projects, the results of studies, and other matters
  • Provides written and oral responses to a variety of inquiries from other agencies, contractors, and the general public
  • May direct the activities of technical and/or clerical staff
  • Prepares correspondence and minutes
  • Performs specialized duties in the areas of civil, mechanical, electrical, transportation and/or environmental engineering

Requirements:

  • Possession of a baccalaureate degree or graduate degree that is accredited by the Accreditation Board for Engineering and Technology (ABET) with a major in Aeronautical Engineering, Aerospace Engineering, Materials Engineering, Mechanical Engineering, or Mechatronics Engineering
  • Possession of a baccalaureate degree or graduate degree from a non-ABET accredited program with a major in Aeronautical Engineering, Aerospace Engineering, Materials Engineering, Mechanical Engineering, or Mechatronics Engineering AND possession of a valid Engineer-in-Training certificate issued by the National Council of Examiners for Engineering and Surveying (NCEES)
  • Possession of a Professional Engineer (PE) license in Mechanical Engineering from the California Board of Professional Engineers, Land Surveyors and Geologists

Additional Information:

Job Posted:
April 24, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
City and County of San Francisco - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Junior Engineer (Mechanical)

Principal Mechanical Engineer

Are you a licensed Mechanical Engineer with a passion for designing complex, hig...
Location
Location
United States , Salt Lake City
Salary
Salary:
Not provided
spectrum-engineers.com Logo
Spectrum Engineers
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering
  • Professional Engineer (PE) license
  • 10+ years of mechanical engineering experience, with at least 2 to 5 years focused on healthcare projects
  • Proficiency in Revit, AutoCAD, and mechanical system modeling tools (e.g., Trane Trace, EnergyPlus, or similar)
  • In-depth understanding of ASHRAE, NFPA 99, FGI Guidelines, and healthcare HVAC and plumbing system requirements
  • Strong communication and problem-solving skills
Job Responsibility
Job Responsibility
  • Lead mechanical engineering team efforts for mid-to-large healthcare projects, including hospitals, outpatient clinics, and specialty medical facilities
  • Be a ‘seller-doer’ by leading business development activities to find and build client relationships and win projects
  • Collaborate with architects, project managers, and consultants to design mechanical systems that meet project requirements, codes, and healthcare-specific standards
  • Develop HVAC and plumbing systems designs using Revit and other industry-standard tools
  • Perform load calculations, energy modeling, equipment selection, and system sizing specific to healthcare facilities
  • Prepare and oversee construction documents, including drawings, specifications, and schedules
  • Participate in client meetings and site visits to review progress, resolve issues, and provide construction phase support
  • Ensure mechanical system designs meet ASHRAE, NFPA, FGI, and state/local healthcare codes
  • Guide and mentor junior engineers and designers within the mechanical team
  • Support project budgeting, scheduling, and coordination with internal teams and external stakeholders
What we offer
What we offer
  • High compensation with a profit/bonus accountability system
  • Complete financial transparency on your projects
  • Employee ownership opportunities of company stock
  • Full medical, dental, and life insurance
  • 401k matching with 200% of your contributions up to 6%
  • Fulltime
Read More
Arrow Right

Junior Design Engineer

Join Our Team as Junior Design Engineer. Are you ready to kickstart your enginee...
Location
Location
Australia , Melbourne
Salary
Salary:
Not provided
jobabc.com Logo
JobABC PTY LTD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Tertiary qualification in Mechanical Engineering
  • 0–3 years of professional engineering experience
  • prior internship, cadetship, or vacation work highly desirable
  • Experience in a manufacturing environment (injection moulding experience is a plus)
  • Proficiency in AutoCAD 2D and Inventor 3D
  • Familiarity with ERP systems, especially SAP
  • Strong computer skills, including Microsoft Word, Excel, and Outlook
  • Detail-oriented, deadline-driven, and committed to continuous improvement
  • Inclusive, collaborative, and able to manage multiple tasks effectively
Job Responsibility
Job Responsibility
  • Create and Maintain Engineering Drawings: Produce accurate technical drawings and Bills of Material from engineering requests, client specifications, and supplier data, ensuring quality and compliance with standards
  • Support Manufacturing and R&D: Assist in design calculations, detailed drawings, and provide technical support to Sandvik’s manufacturing processes and research projects
  • Manage Engineering Data: Set up and maintain materials, assemblies, and manufacturing details in SAP, while ensuring drafting templates and registers are up to date
  • Collaborate and Communicate: Work closely with engineers, suppliers, and customers to resolve technical queries and contribute to continuous improvement initiatives
  • Ensure Quality and Performance: Monitor and report on engineering performance metrics, support calibration of measuring tools, and help implement new engineering processes and tools
What we offer
What we offer
  • Supportive and Inclusive Culture
  • Career Development
  • Work-life Balance
  • Health and Wellbeing: Access to health and wellness programs, including mental health support
  • Leadership Support
  • Family-Friendly Policies: We offer paid parental leave, and other initiatives to support working parents
  • Employee Benefit programs: including discounts program, salary sacrifice options and length of service recognition
Read More
Arrow Right

Contract Senior Mechanical Engineer

We are seeking a Contract Senior Mechanical Engineer to lead the development of ...
Location
Location
United States
Salary
Salary:
Not provided
speckdesign.com Logo
Speck Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or Master’s degree in Mechanical Engineering or a related field
  • At least 7 years of mechanical engineering experience with a proven ability to lead projects from conception to production
  • Expertise in Creo ProE CAD software, with extensive experience in mechanical design, particularly using sheet metal
  • Strong project management skills with the ability to oversee multiple projects simultaneously
  • Excellent communication skills with experience working in a team environment, capable of leading and mentoring junior engineers
  • In-depth knowledge of mechanical design processes and familiarity with industry standard CAD tools
  • 7+ years in mechanical engineering with substantial experience in design and production
  • Exceptional problem-solving skills and the ability to adapt to new challenges and technologies
Job Responsibility
Job Responsibility
  • Utilize Creo ProE CAD software to develop complex mechanical designs and models
  • Design and prototype mechanical components with a particular focus on sheet metal projects
  • Collaborate across multidisciplinary teams to ensure designs meet all specifications and are optimized for manufacturing
  • Oversee the mechanical aspect of projects from conceptualization through to production, handling material selection and the manufacturing processes
  • Engage in the continuous improvement of design practices and methodologies
Read More
Arrow Right

High-Potential Junior Engineers

We are looking for young mechanical, civil, environmental and energy engineers w...
Location
Location
Italy , Millesimo
Salary
Salary:
Not provided
pes-eng.net Logo
Demont S.r.l.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree in Engineering
  • English B2 level
  • Strong digital skills
  • Fulltime
Read More
Arrow Right

Senior Mechanical Engineer

Responsible for the design and layout of mechanical systems under the direction ...
Location
Location
United States
Salary
Salary:
Not provided
ceseng.com Logo
Consulting Engineering Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Mechanical Engineer with a minimum of 5 years of experience working with Plumbing and Fire Protection systems
  • BSME or equivalent degree or an equivalent combination of education and experience
  • Proven design experience in the areas of building operation, energy use Plumbing and Fire Protection, and building automation systems
  • Must be able to use AutoCAD and Revit, for drafting and design to complete a project
  • In depth knowledge of Mechanical Engineering/PFP codes, NFPA and applicable building codes and as well as ASPE standards. Knowledge of LEED, accreditation preferred
  • Must be able to travel and visit work sites as necessary to the job at the time convenient for the clients, contractors and building managers
  • Maintain knowledge and skills in the particular area of expertise by attending conferences, reviewing scientific journals and participating in specific industry standards organizations such as NFPA, ASHRAE, etc.
  • PE license strongly preferred
Job Responsibility
Job Responsibility
  • Coordinate all mechanical, functional and administrative matters related to project plans, sketches, specifications, estimates, studies and special provisions within a project package
  • Review other teams design projects
  • Utilize professional engineering skills and knowledge to troubleshoot a variety of field issues through research and meeting with key process members, designers and area experts
  • Communicate progress and prepare appropriate reports as needed throughout the project
  • Handle projects from inception to completion including continuous interface with clients, the design team, architects and owners
  • Ensure timely delivery of all completed projects
  • meet project schedules set by the Project Manager
  • Evaluate building energy performance via on site field measurements and energy analysis methods
  • cooling and heating load calculations, duct sizing, equipment selection, writing specifications and cost estimating
  • Monitor construction progress and C.A. correspondence to ensure accurate and timely responses to R.F.I.’s and related issues
Read More
Arrow Right

Sr. Staff Mechanical Design Engineer

The Enphase Energy Storage and Systems Innovation team in the office of the CTO ...
Location
Location
United States , Austin
Salary
Salary:
110000.00 - 167000.00 USD / Year
enphase.com Logo
Enphase Energy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS/MS/PhD Mechanical Engineering or closely related discipline
  • Minimum experience: BS and 5+ years / MS and 3+ years / PhD with mechanical design experience for a Senior Engineer
  • BS and 8+ years / MS and 6+ years / PhD and 3+ years mechanical design experience for a Staff Engineer
  • BS and 12+ years / MS and 8+ years / PhD and 5+ years mechanical design experience for a Sr. Staff Engineer
  • Significant experience in product and part mechanical design
  • Expertise leveraging various high volume manufacturing approaches such as sheet metal stamping, die casting, extrusion, forging, laser welding, CNC machining, thermoforming, silicone/rubber molding, injection molding, etc.
  • Proficiency with structural FEA and analyses for vibration, fatigue, and load bearing
  • Experience designing products for manufacturability and reliability
  • High proficiency with an enterprise CAD package (Solidworks preferred)
  • Outdoor product design experience for various ingress protection environments
Job Responsibility
Job Responsibility
  • Design high quality mechanical and electromechanical part and assembly designs efficiently and with good modeling practices
  • Produce 2D drawings and 3D CAD models, evaluate parts, and collaborate with a multi-disciplinary design team, suppliers, and contract manufacturing partners to develop product prototypes
  • Specify key functional and performance requirements
  • design and execute verification test plans
  • Perform mechanical analysis, structural FEA, vibration and shock analysis, FMEA, and design verification testing to inform designs and resolve issues and failures in prototype products
  • Research, analyze, implement, and test new materials and technologies to support innovative energy storage and system product designs
  • Complete documentation for design, testing, and analysis
  • Hands-on fabrication of electromechanical assemblies and prototypes
  • Work with a multi-disciplinary team to test and troubleshoot prototype designs
  • Mentor junior staff
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Junior Mechanical Designer

We are looking for a Mechanical Designer with a strong background in mechanical ...
Location
Location
Canada , Toronto
Salary
Salary:
Not provided
progima.com Logo
Progima
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering (or equivalent experience)
  • 1 – 3 years of experience in a mechanical engineering environment
  • Demonstrated experience in at least one of the following industries: automotive, aerospace, automation, medical instrumentation and other advanced technology industries
  • Excellent oral and written communication abilities, combined with strong interpersonal skills
  • Proficiency in one high-end CAD/CAE package is essential (NX, Catia, SolidWorks, ProE)
  • Flexible schedule and the ability to travel regularly throughout the industrial regions of the Greater Toronto Area (GTA)
  • Ability to thrive in a fast-paced and dynamic environment and present strong ethics and a deep commitment to clients’ and coworkers’ success
  • Strong sense of responsibility and accountability
  • Driven by operational efficiency, results, and strong task performance
  • Must be a Canadian citizen or Landed Immigrant and eligible for Controlled Goods Program certification
Job Responsibility
Job Responsibility
  • Contribute to the design and development of mechanical systems, components, and assemblies, ensuring functionality, manufacturability, and compliance with project requirements
  • Create detailed 3D models and engineering drawings using CAD software, supporting everything from concept design to production-ready documentation
  • Participate in design reviews, feasibility assessments, and prototyping to validate concepts and optimize performance, cost, and reliability
  • Collaborate closely with engineering teams, suppliers, and manufacturing personnel to support the implementation of your designs and resolve technical challenges
  • Demonstrate a strong understanding of mechanical systems, materials, and manufacturing processes, along with familiarity with automation principles and industrial design standards
  • Support project execution through clear communication, organized documentation, and adherence to timelines and quality expectations
  • Contribute to continuous improvement by identifying opportunities to enhance design efficiency, product performance, and process optimization
What we offer
What we offer
  • Performance-based bonus structure
  • Group insurance benefits
  • Long-term career growth and the opportunity to lead and innovate in a collaborative, forward-thinking company
  • The chance to make a tangible impact across a diverse range of industries
  • Fulltime
Read More
Arrow Right

Principal Opto-Mechanical Engineer

Peak Nano is seeking an innovative Principal Opto-Mechanical Engineer with demon...
Location
Location
United States , Macedonia, OH
Salary
Salary:
Not provided
peaknano.com Logo
Peak Nano
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Optical Engineering, or a related field
  • 10+ years of experience in opto-mechanical design and development
  • Demonstrated experience with technical delivery of opto-mechanical products from ideation to launch
  • Expertise in 3D CAD software (e.g., SolidWorks, Creo, NX), opto-mechanical tolerance analysis and design for manufacturability (DFM)
  • Experience with environmental exposure tests and optical performance validation including shock, vibration, temperature, humidity, chemical and UV exposure
  • US Citizenship
Job Responsibility
Job Responsibility
  • Lead the design, analysis, and integration of precision opto-mechanical assemblies for optical systems
  • Provide consistent, proactive guidance on Design for Manufacturing (DFM), Assembly (DFA) and Test (DFT) to support product development efforts
  • Develop innovative mechanical solutions that align with optical, thermal, and structural requirements
  • Collaborate with optical designers, optomechanical designers, manufacturing engineers, and test engineers to define interface requirements and ensure cohesive product development
  • Guide prototype builds and support optical and environmental performance testing to iterate and refine designs
  • Lead design reviews, provide mentorship to junior engineers, and contribute to best practices in opto-mechanical engineering
  • Document all aspects of design, including CAD models, drawings, and specifications, for manufacturing and quality assurance
  • Fulltime
Read More
Arrow Right
Remote jobs Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog Salaries Tools About Us FAQ Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy