Jet Engine Mechanic Job at Randstad (Steenokkerzeel)

Airframe & Powerplant (A&P) Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Opa Locka

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Airframe & Powerplant Certificate
Typically, a minimum of 2 years aircraft maintenance experience or substantiated equivalent experience
Experience on corporate jet aircraft (preferred)
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with Environmental / Health / Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Assist with fuel and / or de-fuel of aircraft

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program
This position may be eligible for up to a $5,000.00 sign-on bonus! (Terms and Conditions Apply)

Fulltime

Airframe & Powerplant (A&P) Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Opa Locka

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Airframe & Powerplant Certificate
Typically, a minimum of 2 years aircraft maintenance experience or substantiated equivalent experience
Experience on corporate jet aircraft (preferred)
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with Environmental / Health / Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Assist with fuel and / or de-fuel of aircraft

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program
This position may be eligible for up to a $5,000.00 sign-on bonus! (Terms and Conditions Apply)
When applicable, Bombardier promotes flexible and hybrid work policies

Fulltime

Aircraft Mechanic III – APG / Engines

The T-38 Aerospace Propulsion Technician inspects, maintains, modifies, tests, a...

Location

United States , Birmingham

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
8+ years of relevant aircraft maintenance experience with fixed wing commercial, Government or DOD aircraft
Must have current practical experience on maintaining, servicing, removing, and installing General Electric J85-GE-5 turbojet with afterburner propulsion system or similar systems
Experience supporting DoD contracts
Knowledge of commonly used concepts, practices, and procedures within the field
Must have the ability to obtain and maintain a Government Security Clearance

Job Responsibility

Inspects, maintains, modifies, tests, and repairs propellers, turboprop and turboshaft engines, jet engines, small gas turbine engines, and engine ground support equipment (SE)
Manages aerospace propulsion functions and activities
Removes, installs, inspects, repairs, T-38 A/B/C propulsion systems, modules and components
Prepares propulsion systems for receiving / installation, storage, or transportation
Tests components using bench mockups and test equipment
Installs and removes propulsion systems on stands, and operates, evaluates, and performs test stand functions
Inspects and maintains propulsion ground SE
Performs operator inspections on related SE
Implements maintenance and safety policies for propulsion systems
Analyzes, interprets, and recommends propulsion systems maintenance actions based on unscheduled removals and monitoring system data

Fulltime

Manager, Process Module Engineering (Packaging Engineering)

To lead Die Attach Process Module Engineering team for Process/Materials Develop...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Master Degree or PhD in Materials Engineering / Mechanical Engineering / Physics / Micro-electronics
Strong hands-on experience Packaging technology development experience and well-versed with structured R&D methodology
Strong experience in driving technology roadmap and technology innovation to achieve best-in-class advanced packaging technology solutions
Minimum 10 years of Semiconductor Packaging Process with in-depth knowledge on IC packaging processes, high-density / ultra-thin die stacking technology development hands-on & indepth exposure
Proven capabilities to navigate through highly dynamic and fast-paced project requirements and interdependencies
Ability to lead complex technical investigation and analysis with global cross-functional teams
Ability to work with internal development / HVM teams and suppliers on process qualification and co-development

Job Responsibility

To lead Die Attach Process Module Engineering team for Process/Materials Development, Qualification and Transfer to HVM
Responsible for Key technology development & tech-staging to drive and enable product, process and materials technology roadmap solutions for next generation memory storage packaging solutions
To lead or co-lead Development JET (Joint Engineering Team) with global cross-functional teams incl. process, materials, CPI, package design, thermal-mechanical simulation, quality and other related stakeholders
To build and nurture strong process development team related to high density ultra-thin die attach process, material and packaging architecture - emphasizing deep engineering fundamental, structured methodology and DOE planning / execution / analysis
To lead studies related to in-depth fundamental investigation/characterization in packaging development
Ensure strong materials to process/design compatibility to meet stringent quality and reliability requirements from customers and industry standards
To co-drive material technology roadmap definition and path finding/development programs with global cross-functional teams including product design, process engineering, lab characterization teams and test engineering in delivering Best-In-Class and Industry leading products
To lead and drive collaboration with strategic equipment & material suppliers, service providers, academia, industry consortium in collaboration projects or co-development activities
To drive breakthrough in product packaging materials and process
To support IR5.0 Digital Transformation for Packaging process e.g. Process Digital Twins, Advanced Process Control (APC), Fault Detection Control (FDC), fundamental lab characterization and design rules definition

Fulltime

Aviation Mechanic II (UH-60)

The aviation mechanic performs a full range of airframe and engine maintenance, ...

Location

United States , Meridianville

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent with 4 years’ experience, with 2 years using military standards and specifications
Knowledge of commonly used concepts, practices, and procedures within the field is required.
Strong communication skills
Ability to pass a drug and background screening
Must be able to obtain and maintain a government security clearance
May require knowledge of and experience performing maintenance on the following aircraft: UH-60 A/L and UH-60 M, require lifting.
Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weightlifting devices
Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.
Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.
Ability to read and interpret all aircraft instruments.

Job Responsibility

Perform Aircraft Maintenance IAW instructions/drawings
Troubleshoot systems as required to meet customer needs
Document maintenance as per Quality Assurance (QA) and established regulatory requirements.
Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties.
Perform regular Foreign Object Damage (FOD) walks.
Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications.
Maintain control tools.
Comply with safety rules and regulations while performing day-to-day maintenance.
Use the government computer system to access various technical references for airframe repairs and government training requirements.
Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, ventilation, and heating systems.

Fulltime

Aircraft Mechanic UH 60L

Astrion has an exciting opportunity for a Aircraft Mechanic UH 60L located at Ft...

Location

United States , Fort Moore

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

High School Diploma
Two (2) years’ experience with documented training on the Model, Designation, Series (MDS) H60 series, or have a current (valid) FAA A&P license and at least one (1) years of documented experience in general aviation
Must climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions
Must operate manual tools and power tools
Color Vision
Hearing
Frequently lifts parts and equipment up to 20 pounds
Occasionally lifts objects up to 50 pounds
Most heavy lifting is accomplished using mechanical devices
Work area is primarily aircraft areas, hangars, workshops, and other industrial settings

Job Responsibility

Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Services and lubricates aircraft and subsystems
Safely prepares aircraft for inspections and maintenance checks and services performs scheduled inspections and assists in performing special inspections
Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
Uses and performs operator maintenance on tools, special tools, and aircraft ground support equipment
Apply comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
Removes, inspects and replaces aircraft structures, such as Main and Tail Rotor systems, flight control systems, Main and APU Engines, Hydraulic pumps and sub-systems, Main Drive Transmissions (Main/Intermediate/Tail/Input/Accessory Gear boxes) and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Mechanic uses calibrated tools daily to execute required work
Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records
Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

Aircraft Mechanic w/ Respirator Certification

Astrion has an exciting opportunity for a Aircraft Mechanic 1 –Avionics/Electric...

Location

United States , Fort Moore

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

Valid driver license
Minimum two (2) years experience with documented training on the MDA H 60 series
Or current (valid) FAA A&P license and one documented experience
Specialty in Avionics/Electrical or Sheetmetal and two years of experience with documentation

Job Responsibility

Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Services and lubricates aircraft and subsystems
Safely prepares aircraft for inspections and maintenance checks and services performs scheduled inspections and assists in performing special inspections
Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
Uses and performs operator maintenance on tools, special tools, and aircraft ground support equipment
Apply comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
Removes, inspects and replaces aircraft structures, such as Main and Tail Rotor systems, flight control systems, Main and APU Engines, Hydraulic pumps and sub-systems, Main Drive Transmissions (Main/Intermediate/Tail/Input/Accessory Gear boxes) and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Mechanic uses calibrated tools daily to execute required work
Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records
Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

New

Lead Flight Test Engineer

The Lead Flight Test Engineer (L-FTE) has the responsibility for the execution o...

Location

China , Tianjin

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

University degree in aeronautics, preferably in flight mechanics or mechanical engineering
>10 years in civil aviation, specifically in flight operations or engineering
Integrity
Rigorousness
Very good English level and communication skills
Bachelor of Engineering
English CET-6
Team player
Customer-minded attitude
Ability to work in a transnational team

Job Responsibility

Execution of flight tests in production on serial aircraft and in delivery with the customer
Prepare a test order and conduct a production flight with pilots and crew
Support In-Service aircraft activities by testing corporate jet, second hand or asset aircraft
Coordinate activities within the crew (pilots, cabin crew) and people on board with relevant CRM
Upstream preparation of flights tests and final validation of production flight tests results
Follow serial aircrafts status from the FOT up to the TAC and the depart of the aircraft after TOT
Elaboration of Flight Test Orders
Validation of the production aircraft doing first flight test program as described in the Production Aircraft Test Manual (PATM) and subsequent flights until the aircraft is ready for delivery
Debrief of the aircraft status to the flight line
Fly with customer during Customer Acceptance Flight by doing checks described in the Customer Acceptance Manual (CAM)

Fulltime

Jet Engine Mechanic

Randstad

Location:
Belgium , Steenokkerzeel

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 06, 2026

Expiration:
March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Jet Engine Mechanic

Airframe & Powerplant (A&P) Technician

Airframe & Powerplant (A&P) Technician

Aircraft Mechanic III – APG / Engines

Manager, Process Module Engineering (Packaging Engineering)

Aviation Mechanic II (UH-60)

Aircraft Mechanic UH 60L

Aircraft Mechanic w/ Respirator Certification

Lead Flight Test Engineer

Jet Engine Mechanic

Randstad

Location:Belgium , Steenokkerzeel

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 06, 2026

Expiration:March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Jet Engine Mechanic

Airframe & Powerplant (A&P) Technician

Airframe & Powerplant (A&P) Technician

Aircraft Mechanic III – APG / Engines

Manager, Process Module Engineering (Packaging Engineering)

Aviation Mechanic II (UH-60)

Aircraft Mechanic UH 60L

Aircraft Mechanic w/ Respirator Certification

Lead Flight Test Engineer

Location:
Belgium , Steenokkerzeel

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 06, 2026

Expiration:
March 10, 2026