Iqc Job at The Muse (Wuhan)

Battery Technician

ALSO is looking for a Battery Technician to build the future of electric mobilit...

Location

United States , Palo Alto

Salary:

45.00 - 60.00 USD / Hour

ALSO

Expiration Date

Until further notice

Requirements

3+ years of hands-on experience in electro-mechanical assembly, preferably in the EV, aerospace, or consumer electronics sectors
Expert knowledge of crimping tools, connector assembly, and reading electrical schematics/pinout diagrams
Proficient in soldering for rework and assembly (IPC-610/J-STD-001 certification is a plus)
Proficiency with digital multimeters (DMMs), oscilloscopes, and power supplies
Strong understanding of Low Voltage (LV) safety standards (NFPA 70E) and lithium-ion handling procedures

Job Responsibility

Fabricate complex wire harnesses from schematics and wiring diagrams
Perform precision wire cutting, stripping, and crimping using industry-standard tools
Route and secure cabling within battery packs to ensure thermal and vibration safety
Troubleshoot open/short circuits and continuity issues in prototype harnesses
Perform soldering and rework on Printed Circuit Boards (PCBs)
Interface with the Battery Management System (BMS) for firmware flashing and validation
Assist in the installation of PCBs into mechanical housings
Handle lithium-ion cells following strict safety protocols
Operate spot welding or laser welding equipment for cell interconnects
Apply Thermal Interface Materials (TIMs), epoxies, and structural adhesives during module assembly

What we offer

Robust health coverage. Excellent health, dental and vision insurance covered up to 100% by ALSO with FSA & HSA options
One Medical membership and dedicated insurance advocates
Rich fertility and family building benefits with Progyny
Flexible time off
401(k) match

Fulltime

Optical Metrology Engineering Manager

At Meta Reality Labs, we are developing the future of Wearables and Mixed Realit...

Location

United States , Sunnyvale

Salary:

173000.00 - 245000.00 USD / Year

Supplier Quality Management Engineer

As a Supplier Quality Management Engineer in the Vehicle & QA team at Voi, you w...

Location

China , Changzhou

Salary:

Not provided

Voi Technology

Expiration Date

Until further notice

Requirements

Bachelor’s degree in an engineering discipline, ideally Mechanical or Electrical (or equivalent practical experience)
Strong experience working with suppliers in China, including on‑site presence in factories and workshops
Experience collaborating with Western (European or North American) teams and working across functions such as project management, vehicle hardware, test & verification, R&D, firmware/software, procurement and supply chain
Proven experience leading hands‑on root cause analysis on assemblies and processes, and driving mitigation, corrective and preventive actions through to verified results
Experience working with DFMEA and PFMEA in a manufacturing or product development context
Excellent problem‑solving skills
being data driven and comfortable working with tools such as SQL is a strong plus
Excellent communication skills, both written and verbal, in English and Chinese
Ability to manage multiple projects in parallel and stay structured in a fast‑moving, scale‑up environment
Strong drive to reach the end goal of a safe, reliable and useful product for Voi and our riders, and genuine enjoyment of collaborating with suppliers and teams across the organisation

Job Responsibility

Oversee day‑to‑day production at supplier sites, from IQC to EOL inspection
Identify quality issues in production and aftermarket, lead structured root cause analysis, and define, follow up and verify corrective and preventive actions together with suppliers
Travel to supplier sites (often for extended periods) to work hands‑on on the line, flag issues to Voi management, and build strong, long‑term relationships with supplier teams
Travel to Sweden and other European locations around 2 times per year to collaborate closely with Voi teams and understand how your work impacts our ~100 operating cities
Search for, identify and evaluate new suppliers for micromobility vehicles parts, including technical assessments and quality‑focused audits
Work with suppliers so that they can provide a quotation based on Voi part requirements and their own engineering solutions, ensuring quality, cost and lead time are balanced

What we offer

Join Europes #1 micromobility company
Work with inspiring, motivated and fun colleagues towards a common goal
Join the micromobility-revolution and be a part of creating sustainable cities made for living, free from noise and pollution

Fulltime

Sr. Product Quality Manager

Microsoft Windows + Devices Group is focusing on design, manufacturing and deliv...

Location

Vietnam , Hanoi

Salary:

Not provided

Microsoft Corporation

Expiration Date

Until further notice

Requirements

Master's Degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or related field AND 3+ years technical engineering experience
OR Bachelor's Degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or related field AND 5+ years technical engineering experience
OR equivalent experience
Working experience with product standards, statistical methods, risk management, and corrective/preventive action process
Rich knowledge of Quality System Regulation, Statistical Process Control and ISO Quality System Standard
Excellent analyzing & problem solving skill, and strong ability to drive for contaminant of issue
Good interpersonal skill and effective communication which able to express technical concepts in verbal and written English with cross functional teams
Ability to meet Microsoft, customer and/or government security screening requirements
Microsoft Cloud Background Check upon hire/transfer and every two years thereafter

Job Responsibility

Transfer products from Tier 1 factory in China to Vietnam, bring up new factory and set up product quality control processes on time to ensure shipping products with high quality
Ensure the flawless execution of quality control processes in Vietnam factory
Measure, monitor and improve factory quality performance based on established acceptable quality performance levels
Lead the product quality issue triage with cross functional team and execute CAPA process to drive for root cause analysis and corrective/preventive actions
Initiate and implement continuous improvement projects for factory operation or assembly processes, quality control processes, and documentations
Enforce industry best quality manufacturing practices at Vietnam factory, including specifying and monitoring IQC, OBA, ORT, GR&R, FAI, and the implementation and management of the overall manufacturing Quality Strategy
Directing and setting priorities for Tier 1 partner quality teams focused on creating new ways to solve repair and refurbish challenges, inventing and commercializing new technologies and methods
Collaborate with cross-functional teams to provide systematic feedback and drive generation improvement on product design
Drive clear and accurate communications and recommendations to peers and senior management by distilling complex technical challenges, outlining options, and providing supporting data

Fulltime

Site Service Engineer

An exiiting opportunity to join a leading manufacturing company based in the Car...

Location

United Kingdom , Cardiff

Salary:

28000.00 - 29000.00 GBP / Year

Hunter Selection | B Corp™

Expiration Date

Until further notice

Requirements

Relevant carpentry, technical or engineering qualifications (e.g., NVQ, HNC, or equivalent)
Practical experience in a similar role may be considered in lieu of formal qualifications
Holder of a Full UK Driving Licence
Strong technical knowledge and hands-on problem-solving abilities
Excellent understanding of health and safety regulations
Ability to work independently and as part of a team.

Job Responsibility

Conduct site visits (home and abroad) and perform remedial work as per customer requests and agreed method statements
Ensure compliance with all site health, safety, and environmental regulations
Complete and submit site visit reports via the online management system, obtaining customer approval
Conduct risk assessments and follow safe working practices
Report accidents, near misses, and any safety concerns in accordance with company procedures
Assist the production team with tasks that align with your training and expertise when required
Support the IQC team with product testing and installations
Participate in training to maintain compliance with site demands and legislative requirements
Suggest improvements to plant, equipment, or processes to enhance efficiency.

What we offer

up to 25 days holiday plus bank holidays + extra day of for your birthday
Sick pay scheme
Life insurance
Free on-site car parking
Excellent training and development.

Fulltime

Quality Engineering Technician, Metrology

We are looking for a technician to work in our manufacturing facility helping to...

Location

United States , San Jose

Salary:

35.00 - 50.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

5+ years of similar experiences in a manufacturing environment
Able to read and interpret engineering drawings and CAD models
Good understanding of GD&T
Proficiency with common inspection tools, including Digital Height Gage, caliper, micrometer, thread gages, etc.
Attention to detail: capable of maintaining precision in a fast-paced environment
Strong communication skills: good verbal and written communications skills with analytics and numeracy

Job Responsibility

Perform dimensional, visual, functional verification and other inspections per QC plan or Work Instructions
Perform First Article Inspection Report
Review incoming quality documents
Document and report quality issues using 8D
Maintain the tools and QC area in clean and organized conditions
Collaborate with technicians, Quality Engineers, and Manufacturing Engineers
Support other IQC related activities

Fulltime

Production Specialist

A required Production Specialist for Needle Bending is responsible for visual ch...

Location

Philippines

Salary:

Not provided

Technoprobe

Expiration Date

Until further notice

Requirements

Able to bends the needle according to the order form and calibrates/set-ups of bending machine
Performs IQC of at least 2% of the received needles and measure the pins using profile projector
Must have good soldering skills and understand schematic drawings
Must have basic computer knowledge and able to pass the dexterity test

Job Responsibility

Visual checking of pins and ensure that needles are clean and free from bent tip, deformed body, crack pin and discoloration

New

Electrical Commissioning Engineer

Commissioning & Testing role for mission-critical electrical systems.

Location

Ireland , Dublin

Salary:

Not provided

Darwin Recruitment GmbH

Expiration Date

Until further notice

Requirements

Degree or diploma in Electrical Engineering or related discipline
Experience commissioning critical electrical infrastructure
Knowledge of power distribution systems in mission-critical facilities
Familiarity with electrical testing equipment and procedures
3-8 years experience in electrical commissioning or testing
Experience on data centres or critical facilities preferred
Familiarity with mission-critical redundancy systems.

Job Responsibility

Execute commissioning activities for mission-critical electrical systems
Review commissioning plans, procedures, and method statements
Perform testing and validation of: MV/LV switchgear, Transformers, UPS systems, Battery systems, Generators, ATS/STS systems, Busway and distribution systems, Power Distribution Units (PDUs)
Conduct pre-functional and functional performance testing
Review electrical drawings, specifications, and commissioning documentation
Maintain accurate commissioning records, test reports, and punch lists
Ensure compliance with project standards and relevant electrical codes
Support handover documentation and client training.

Iqc

The Muse

Location:
China , Wuhan

Category:
Quality Control

Contract Type:
Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Iqc

Battery Technician

Optical Metrology Engineering Manager

Supplier Quality Management Engineer

Sr. Product Quality Manager

Site Service Engineer

Quality Engineering Technician, Metrology

Production Specialist

Electrical Commissioning Engineer

Iqc

The Muse

Location:China , Wuhan

Category:Quality Control

Contract Type:Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Iqc

Battery Technician

Optical Metrology Engineering Manager

Supplier Quality Management Engineer

Sr. Product Quality Manager

Site Service Engineer

Quality Engineering Technician, Metrology

Production Specialist

Electrical Commissioning Engineer

Location:
China , Wuhan

Category:
Quality Control

Contract Type:
Not provided

Job Posted:
March 21, 2026