Intern, IMS Software Engineering Job at CommScope (Catawba)

New

International Service Engineer

At Alfa Laval, we always go that extra mile to overcome the toughest challenges....

Location

China , Shanghai

Salary:

Not provided

Alfa Laval

Expiration Date

Until further notice

Requirements

Marine Engineering background with good hands-on electrical skills
Minimum 6 years of experience as a Marine Engineer, on board or on a yard, or equivalent
Minimum 2 years of commissioning experience for comparable installations
Minimum 1 year of EGC commissioning experience
Fluent in English

Job Responsibility

Trouble shooting on PureSOx systems, including: Preparation of job by collecting documents, drawings, software and parts if needed
Install or replace new parts
Download, upload and test new version of PLC and/or HMI software
Tune pump VFDs
Calibrate measurement instruments (pH, PAH, gas analyser)
Test alarm functions
Verify compliance of job with Global Technical Specialist
PureSOx system site support and commissioning at shipyard
PureSOx systems condition audit and sensor exchange
Reports daily progress to IMS Global Technical Specialist and Global Coordinator

Fulltime

New

Quality Engineer

The Quality Engineer plays a key role in evaluating and maintaining product and ...

Location

United States , Mannford, OK

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Minimum 2 years of applicable experience in a related role
Experience with GMP in medical devices and/or pharmaceuticals is a must
Supplier quality experience is a plus
Bachelor’s degree (BS) or equivalent required
Basic knowledge of theories, practices, and procedures in quality engineering
Ability to work under direct supervision and perform routine tasks
Basic knowledge of quality engineering policies, principles, and best practices
Basic statistical sampling and analysis skills
Competence in writing test protocols and validation reports
Strong problem-solving and analytical abilities

Job Responsibility

Evaluate and maintain product and service quality
Resolve equipment and process-related production issues
Conduct equipment, process, materials, and method validation
Perform statistical analysis and metrics to assess systems and processes
Develop and execute test protocols, collect data, and write validation reports
Collaborate cross-functionally in product/service development or maintenance

Fulltime

New

Quality Engineer

Quality Engineering is responsible for product and service quality evaluation an...

Location

United States , Covington

Salary:

22.00 - 28.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Demonstrates basic knowledge of quality engineering policies, principles and best practices
Demonstrates basic knowledge of FDA/ISO requirements
Applies basic statistical sample size calculations to work for quality determination on simple projects
Applies basic understanding of regulatory requirements (cGMP, FDA, ISO, etc.) to support work with direct supervision
Writes test protocol, tests, collects data, and writes reports to validate against plan to ensure product is used as intended
Has basic knowledge of theories, practices and procedures in a job family or skill
Applies knowledge and skills to complete own work
Depends on others for instruction, guidance and direction
Develops competence in own area by performing routine work
Need US Citizens Or GC Holders Only

Job Responsibility

Product and service quality evaluation and control
Works cross-functionally in the development and or maintenance of products or services
Involved in resolving the equipment and process-related production issues
Activities including equipment, process, materials and method validation
Statistical analysis and metrics to analyze those systems and processes being measured

Fulltime

New

Product Development Engineering Technician

Perform technical tasks related to product functional assessment, including conc...

Location

United States , Franklin Lakes

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

0–2 years of engineering or technical experience, preferably in medical devices
Experience using small hand tools
Working knowledge of the operation of mechanical measurement equipment (e.g., Instron) is desirable
Ability to handle multiple tasks/projects simultaneously
Excellent written and oral communication skills
Demonstrated ability to utilize statistical tools and perform computer analysis
A BS degree in engineering is desirable (Mechanical Engineering preferred)
Some form of technical training (e.g., college in a science or engineering background, technical school, or lab environment experience)
Onsite presence required 5 days a week

Job Responsibility

Perform technical tasks related to product functional assessment, including concept feasibility, design verification, sustaining engineering, and new product development of medical devices
Execution of test protocols using mechanical laboratory equipment and manual manipulation
Assist in planning, execution, and data analysis of experiments and prepare technical reports when necessary
Provide technical support on general laboratory instrumentation and equipment
Participate in investigations related to equipment, test methods, or quality issues
Support continuous improvement of laboratory processes
Assist in onboarding and training of associates
Maintain good laboratory and documentation practices
Ensure compliance with applicable BD policies, procedures, standards, and regulations

Fulltime

New

Change and Transformation Automation Manager

The Change and Transformation Automation Manager will play a key role in shaping...

Location

United Kingdom

Salary:

45000.00 - 75000.00 GBP / Year

Psychiatry UK

Expiration Date

Until further notice

Requirements

Minimum 5+ years of experience in roles focused on process improvement, automation, digital transformation, or operational efficiency
Proven experience with automation tools and platforms (e.g., RPA, chatbot platforms, AI/ML-driven support solutions)
Strong analytical skills, capable of data-driven decision-making
Relevant certifications in Lean/CI/Change Management at Advanced/Green belt
The ability to think strategically and align initiatives with an organisation's overall goals and objectives
Strong project management skills to plan, execute, and deliver projects from inception to delivery
Effective communication and collaboration skills to engage with cross-functional teams
Leadership capabilities to inspire and guide teams, set a vision, and drive execution

Job Responsibility

Develop and execute a comprehensive strategy for automating patient interactions and optimising support workflows, including self-service, chatbots, and RPA/AI-driven solutions
Conduct in-depth analysis of current E2E patient journey processes to identify bottlenecks and opportunities for automation and efficiency gains. Design future-state processes that leverage technology
Oversee the end-to-end implementation of automation projects, from concept to deployment, ensuring solutions are robust, scalable, and meet defined success metrics
Leads organisational change efforts related to adoption, overcoming resistance, and ensuring smooth transition
Represent the voice of the patient, the employees and the business while identifying transformational improvement opportunities and implementing change
Act as a coach and trainer for the implementation and continual learning of Lean and change management principles across the organisation
Collaborate with various stakeholders, including IT, business units, and data scientists, to ensure alignment and successful execution of projects
Define and track KPIs to measure the effectiveness and impact of initiatives, providing insights for decision-making
Evaluate the ROI of projects and initiatives, demonstrating their value and impact on the organisation
Identify risks and ensure compliance with data privacy regulations, security, Healthcare-related standards and CQC guidelines

What we offer

£1000 working from home allowance

Fulltime

New

Sr R&D Engineer

Position: Sr R&D Engineer for a Medical Devices Company. Duration: 12+ Months Co...

Location

United States , Salt Lake City

Salary:

40.00 - 45.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

BS or MS degree in Engineering (Mechanical Engineering, Materials Science & Engineering, Biomedical Engineering or a closely related engineering degree required)
Minimum of 3 years of engineering experience or equivalent is required with a strong preference for least 2 year product development and design experience in medical devices / products
Medical device design and development experience related to high-volume manufacturing is strongly preferred
Experience with contact and non-contact metrology
Experience with manufacturing process validation including strategy development, First Article Inspection, Factory Acceptance Testing, and IQ/OQ/PQ’s
Knowledge of disciplined product development processes, regulatory and quality requirements such as 21CFR820.30
Strong design control experience
Developed understanding of DOE and statistical methods
Understanding of failure theory and modes for plastics, elastomers, and metals due to static and time-variable loading conditions

Job Responsibility

Drive design and development of product systems, subsystem and components by understanding design space with design options and tradeoffs, managing critical parameters, using design for manufacture principles as well as geometric dimensioning and tolerancing tools
Integrate product systems and subsystems to meet business objectives by addressing customer needs and product requirements under defined cost targets
Identify the best tools and approaches to effectively solve engineering problems to develop/optimize designs by leveraging appropriate mix of first principles / analytical, computational and experimental methods
Ensure implementation and rigor of product development processes and design control procedures
Support current products in terms of quality, manufacturing, supply continuity and cost improvement
Support execution of technical and/or cross-functional project work
Analyze design solutions using engineering first principles and advanced engineering methods such as FEA
Write detailed technical reports based on design verification analysis/testing for design changes and product design activities
Develop and execute test methods which specify measurement equipment, test set-up, measurement systems analysis, and data analysis
Develop realistic and actionable design plans

Fulltime

New

Machine operator

Performs routine setup, operation, minor maintenance, preventive maintenance (PM...

Location

United States , Sparks

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

2 years of manufacturing experience in a regulated environment (e.g., FDA)
Relevant manufacturing experience in Food, Pharma, or Industrial sectors preferred
An AA technical degree with no prior experience is also acceptable
Minimum education: High school diploma or AA technical degree
Ability to operate within approved process-related documentation
Proficient in following established procedures in a regulated environment

Job Responsibility

Set up and operate a variety of production equipment, including automated machinery, for tasks such as filling, packing, assembling, labeling, and inspecting
Troubleshoot and resolve basic issues related to machine performance or product quality
Perform routine inspections to ensure quality and remove defective products, packaging, or materials
Use independent judgment for problem-solving under general supervision
Assist with root-cause analysis for process or product exceptions
Maintain accurate documentation of quality, safety, and maintenance activities
Analyze and evaluate charts, follow simple diagrams, and adhere to testing and inspection procedures

Fulltime

New

Senior Program/Project Manager

Senior Program/Project Manager role for a Medical Devices Company. This is a 9+ ...

Location

United States

Salary:

90.00 - 94.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

10+ years overall project/program management experience
2+ years leading major cross-functional corporate programs requiring business changes
BS in Business Administration/Computer Sciences/Engineering or related degree that provides strong PM skill development
Project Management in IT Background SDLC Knowledge
Knowledgeable in program/project management industry best practices
Demonstrated experience driving projects from initiation through closure
Adept at partnering with business sponsors and stakeholder to shape the project business case and gain organizational support and approval
In depth understanding of the detailed project planning processes and tools
Experienced establishing Stakeholder management plans, Risk/issue management plans, Vendor management plans and Quality plans
Experienced establishing and following controls to manage scope change and reporting project schedule/budget performance

Job Responsibility

Partners with project sponsors and stakeholders to define program/project objectives and business case
Leads full life cycle project delivery for multiple medium/large project or larger programs
Takes ownership for delivering program/project objectives and deliverables
Drives project execution to meet project schedule, cost and quality requirements
Manages internal and external customer relationships to realize high customer satisfaction for their program and projects
Implements company and industry best practice program/project methodology for delivering their programs and projects
Supports EPPM management in refining program/project management practices and implementing them throughout the ePMO
Mentors project managers and project coordinators in project management best practices

Fulltime

Intern, IMS Software Engineering

CommScope

Location:
United States , Catawba

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Intern, IMS Software Engineering

International Service Engineer

Quality Engineer

Quality Engineer

Product Development Engineering Technician

Change and Transformation Automation Manager

Sr R&D Engineer

Machine operator

Senior Program/Project Manager

Intern, IMS Software Engineering

CommScope

Location:United States , Catawba

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Intern, IMS Software Engineering

International Service Engineer

Quality Engineer

Quality Engineer

Product Development Engineering Technician

Change and Transformation Automation Manager

Sr R&D Engineer

Machine operator

Senior Program/Project Manager

Location:
United States , Catawba

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 10, 2026