Instrumentation Design Engineer Job at Monarch Innovation Private Limited (Ahmedabad)

Senior Design Engineer – Instrumentation & Control

Senior Design Engineer role in Instrumentation & Control at Assystem Stup, focus...

Location

India , Navi Mumbai

Salary:

Not provided

ASSYSTEM

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Instrumentation Engineering, Electrical Engineering, Electronics, or related field
Typically 10-15 yrs of experience in instrumentation design, installation, or maintenance
Strong knowledge of process instrumentation (flow, pressure, level, temperature, etc.)
Experience with PLC, DCS, SCADA systems, and fieldbus communication (HART, Modbus, Profibus)
Familiarity with P&IDs, loop diagrams, and control narratives
Understanding of hazardous area classifications and intrinsically safe systems
Strong analytical and troubleshooting abilities
Good communication and teamwork skills
Attention to detail and safety awareness

Job Responsibility

Develop and review instrumentation and control system designs, drawings, and specifications
Select appropriate instruments, sensors, transmitters, and control systems for process applications
Prepare datasheets, material requisitions, and technical bid evaluations
Participate in project planning, cost estimation, and scheduling of instrumentation activities
Coordinate with other engineering disciplines (mechanical, electrical, process, etc.) during project execution
Support construction and commissioning of instrumentation systems
Develop and implement calibration procedures and schedules for field instruments
Troubleshoot, maintain, and repair instrumentation and control systems
Ensure all instruments meet required accuracy, safety, and compliance standards
Support configuration, testing, and optimization of PLCs, DCS, and SCADA systems

Fulltime

Flight Test Instrumentation Electrical Design Lead

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

186240.00 - 232800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

B.S. in Engineering
7+ years experience as Electrical Design Engineer or Instrumentation Engineer
Experience with design and installation of wiring for flight
Experience with the routing of wires/harnesses for aircraft
Experience generating work instructions
Experience with design for manufacturing
Must be able to lift 30 lbs unassisted

Job Responsibility

Support the Design, Fabrication, Developmental Test, and Certification Efforts of Archer’s piloted eVTOL aircraft project
Perform the Electrical Installation Design for all Flight Test Instrumentation related hardware for flight test aircraft
Support the Installation planning and liaison manufacturing for the installation of flight test instrumentation onto test aircraft in buildup and in active test
Work with internal customers and vendors to solve instrumentation and measurement related challenges
Key advisor to the Instrumentation Director regarding all aircraft instrumentation electrical design activities
Develop processes and documentation to support the installation and maintenance of flight test instrumentation
Collaborate with the Flight Test Engineering and Certification Teams to plan and perform all required development and certification flight test activities
Collaborate with all engineering design and analysis teams to establish a comprehensive instrumentation plan including, but not limited to, monitoring of strain, temperature, vibration, pressure, airdata, ECS, etc
Assist in designing all hardware required for flight test. For example, instrumentation racks, air data booms, aircrew interfaces, workstations, camera systems, telemetry systems, etc
Support instrumentation technicians and Aircraft Operations Team in the implementation of instrumentation designs

Fulltime

Flight Test Instrumentation Mechanical Design Lead

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

186240.00 - 232800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

B.S. in Engineering
7+ years experience as Mechanical Design Engineer or Instrumentation Engineer
Experience with design and installation of hardware for flight
Experience with the routing of wires/harnesses for aircraft
Experience generating work instructions
Experience with design for manufacturing
Must be able to lift 30 lbs unassisted

Job Responsibility

Support the Design, Fabrication, Developmental Test, and Certification Efforts of Archer’s piloted eVTOL aircraft project
Perform the Mechanical Installation Design for all Flight Test Instrumentation related hardware for flight test aircraft
Support the Installation planning and liaison manufacturing for the installation of flight test instrumentation onto test aircraft in buildup and in active test
Work with internal customers and vendors to solve instrumentation and measurement related challenges
Key advisor to the Instrumentation Director regarding all aircraft instrumentation mechanical design activities
Develop processes and documentation to support the installation and maintenance of flight test instrumentation
Collaborate with the Flight Test Engineering and Certification Teams to plan and perform all required development and certification flight test activities
Collaborate with all engineering design and analysis teams to establish a comprehensive instrumentation plan including, but not limited to, monitoring of strain, temperature, vibration, pressure, airdata, ECS, etc.
Assist in designing all hardware required for flight test. For example, instrumentation racks, air data booms, aircrew interfaces, workstations, camera systems, telemetry systems, etc.
Support instrumentation technicians and Aircraft Operations Team in the implementation of instrumentation designs

Fulltime

Instrumentation Engineer – Process Automation and Electrical Engineering

Instrumentation engineer is responsible for activities related to its discipline...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering or Bachelor’s Degree in Chemical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Technical specifications / data sheets for field and control room instrumentation
Sizing and calculation of flow elements, control, and safety valves
Process hook-up sketches and relevant bill of materials
Interconnecting and wiring diagrams
Instrumentation cabling, wiring, junction boxes, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.)
Cause & effect matrices
Interlock and control logic diagrams
Interlock and control narratives
Distributed Control Systems (DCS)
Safety Instrumented Systems (SIS)

Fulltime

Senior Instrumentation Engineer

Senior Instrumentation Engineer is responsible for activities related to its dis...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering
Minimum +7/8 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Discuss with Project Manager and Head of Department the project execution strategy and project time schedule
Coordinate the discipline activities ensuring consistency with schedule, project requirements, technological requirements, safety requirements and standards defined for the project
Cooperate with other disciplines’ leaders for the project execution
Identifies deviations by contract scope of work and their impact on the project
Interface with Customer, Vendors and Manufacturers for instrumentation subjects
Provide instrumentation engineering expertise for the design and development of the project
Checks and approves the documentation related to the project before issuing
Contribute to Hazard and Operability studies (HazOp), Hazard Identification studies (HazId), risk assessment, SIL assignment
Provide technical support to procurement department (Technical Bid Evaluation)
Provides feedback to the Head of Department to increase efficiency of the team assigned to the project

Fulltime

Product Design Engineer

Seeking a Product Design Engineer (Product Engineer) for a full-time position wi...

Location

United States , Jackson, Michigan

Salary:

Not provided

GlobalEdge Technologies

Expiration Date

Until further notice

Requirements

Proficiency in CATIA V5
Proficient in use of analysis tools and application of boundary conditions, constraints, and application of loads
Ability to read and understand Drawings, Specifications, and Requirements
Working knowledge of Geometric Dimensioning and Tolerancing (GD&T)
Understanding of design evaluation techniques such as reliability analysis, statistical tolerance stack up, Failure Mode and Effect analysis (FMEA), etc.
Proficiency in Product Data Management systems for document control and workflow management (ENOVIA is a plus)
Ability to compose clear and concise technical communication
Bachelor’s degree from accredited institution in engineering required. (Mechanical or aerospace discipline preferred.)
5 years’ experience in a product design and development engineering

Job Responsibility

Execute internal and customer technical deliverables on high complexity projects within the PRE/PROLaunch development process through the use of the Aerospace Common Engineering Standards
Drive the design and develop new products or re-design current products to meet customer requirements via cross functional collaboration with customers and an internal team including Manufacturing, Quality, Supply Chain, Program Management as well as product or process subject matter experts
Identify project technical and schedule risks, prioritize based on quantified impact, and execute mitigation plans
Evaluate design trade-offs using Design for Six Sigma tools
Support creation and execution of product development plans to meet customer requirements and quote the labor, material, and other direct costs (MODC) required to execute the development and qualification programs, addressing technical risks prior to qualification
Apply statistical and analytical tools towards effective problem-solving and completion of project activities
Aid in directing and reviewing work performed by engineering resources within Company's functional Centers of Excellence (COEs) for timely completion of project objectives
Support structured problem solving efforts and/ or failure analysis to solve issues in a timely manner
Conduct internal, supplier, and customer design reviews
Support or author qualification procedures defining instrumentation strategies and test setup detail in conjunction with the test engineering. Must be fully knowledgeable about sampling rates, noise sources, grounding, and filtering

Fulltime

Senior Controls Design Engineer- Hardware

As a Controls Design Engineer you will be the driving force behind bringing ATS’...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering
6+ years of experience in electrical controls systems design, development with experience in robotics, machine building and automation system environments
Strong electrical problem solving skills
Thorough understanding and hands-on experience with PLCs, robotics control systems and machine operation
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments

Job Responsibility

Design and develop electrical and pneumatic schematics specific to customer and project requirements based on standard ATS design approach
Create complete electrical schematics including power distribution
motor control
safety
PLC, PC and/or robot I/O
analog I/O
fuse and wire sizing
and detail panel layouts
Work directly with customers for concept development and advise customer on solving technical problems
Debug and commission electrical / pneumatic systems at our facility and on-site at customer locations

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Competitive starting salaries
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits

Fulltime

Electrical design and estimation engineer

Location

India , Pune

Salary:

Not provided

Blumenbecker Industriebedarf GmbH

Expiration Date

Until further notice

Requirements

BE/ B. Tech from reputed college of engineering in electrical, electronics, instrumentation engineering
Proficiency in electrical design software like EPLAN, AutoCAD etc.
In depth knowledge of LV and HV switchgear from reputed manufacturers (like siemens, ABB, schneider etc.) is must
Be able to handle customers independently
Good communication skills (oral and written)
Willing and passionate to learn new things, technologies

Job Responsibility

Designing of Electrical systems
Gathering customer requirements, estimation and preparation of bill of material (BOM) accordingly
Drawing the electrical layout in electrical design software like EPLAN, auto cad etc.
Preparing of load sheet, SLDs, layouts, macro etc.
Design of PLC, VFD, RIO panels
Co-ordination with production, purchase and sales team for execution of project

What we offer

Work on projects with multi national companies
Working on advanced electrical systems
Great learning opportunities
Learn and implement international engineering standards
Work on projects with CE/UL certification

Instrumentation Design Engineer

Monarch Innovation Private Limited

Location:
India , Ahmedabad

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Instrumentation Design Engineer

Senior Design Engineer – Instrumentation & Control

Flight Test Instrumentation Electrical Design Lead

Flight Test Instrumentation Mechanical Design Lead

Instrumentation Engineer – Process Automation and Electrical Engineering

Senior Instrumentation Engineer

Product Design Engineer

Senior Controls Design Engineer- Hardware

Electrical design and estimation engineer

Instrumentation Design Engineer

Monarch Innovation Private Limited

Location:India , Ahmedabad

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Instrumentation Design Engineer

Senior Design Engineer – Instrumentation & Control

Flight Test Instrumentation Electrical Design Lead

Flight Test Instrumentation Mechanical Design Lead

Instrumentation Engineer – Process Automation and Electrical Engineering

Senior Instrumentation Engineer

Product Design Engineer

Senior Controls Design Engineer- Hardware

Electrical design and estimation engineer

Location:
India , Ahmedabad

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
March 05, 2026