Instrument Engineering Specialist Job at Airswift Sweden (Doha)

Instrument Engineering Specialist

Advise and support Instrumentation/Fire & Gas (F&G) Engineering activities durin...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering or equivalent
8 years' experience in an oil and gas environment
Demonstrate good working knowledge of DCS, PLCs, ESD/F&G Systems, Anti Surge Control Systems, Metering Systems, and Turbine/Compressor Control Systems and full knowledge of SIL requirement

Job Responsibility

Provide a variety of Instrument/F&G engineering supports to contribute to the division strategy and goals which includes design reviews (eg, SIL workshops, assessment and verification, HAZOP, etc), commissioning, startup, failure analysis and advanced troubleshooting
Develop and implement surveillance and administration programs for critical Instrument and F&G Systems of new projects to achieve high standards of Reliability, Availability and Cyber Security
Define and document best practices within the area of expertise and recommend performance improvement initiatives
Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs
Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives
Control and supervise the activities undertaken by contractors, consultants and service providers
Guide less experienced engineers in implementing the company integrity and reliability systems
Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility
Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability, Availability and Cyber Security
Support high risk commissioning activities for high complexities & large-scale projects by undertaking stringent system surveillance, tuning and optimizing instruments and F&G systems, and providing advisory support to Operations and Maintenance

Sr Engineering Specialist

The Automations and Electrical Controls Engineer has responsibility for overall ...

Location

United States , Aiken

Salary:

Not provided

Owens Corning

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Engineering
Five years of automation and control engineering experience in a manufacturing environment
Strong safety awareness, commitment and safety leadership
Experience working with 480 V
Experience leading projects (Capital, Focused Improvement)
Strong knowledge of PLC based controls, HMI applications, and programming (Siemens)
Availability to work nights, weekends, and holidays as required by operational support needs

Job Responsibility

Lead Safety for an injury free work environment
Educates team members on safe maintenance work processes and procedures
Adheres to, and continuously improves, all Plant and position-specific safety policies, procedures, and standards
Ensures a safe, clean and environmentally compliant work environment and builds a culture where safety is a first priority
Effectively communicates Owens Corning’s stand of safety with external parties and ensures that they work according to our safety standards
Good knowledge of NEC NFPA 70 and 70E, including Arc Flash
Developing Talent
Develops and executes training plans for maintenance personnel and creates a continuous learning environment for employees
Co-leads and coaches’ primary maintenance workforce and drives their engagement
Promotes a work environment characterized by mutual trust and respect, open and honest communications, teamwork and a passion for winning

Fulltime

Senior Engineering Specialist, Loads and Dynamics

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Wichita

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Bachelor's or Master’s degree in Aerospace or Mechanical Engineering
At least 10 years of experience in external loads analyses in the aerospace industry
Good understanding of the FAR 25 certification requirements
Strong background in static and dynamic aeroelastic loads analyses
Ability to develop FEM models, compute airframe design loads and component design loads (high lift and control surface) or perform flutter and Aeroservoelastic analysis
Previous experience using Nastran for Dynamic/Aeroelastic analysis
Good understanding of FEM, unsteady aerodynamics, and frequency-based data analysis
Familiarity with concepts of linearizing controls laws to be used for TDG and PSD gust and Aeroservoelastic analyses
Good knowledge of engine fan blade out and windmilling dynamic loads analyses
Experience in working in flight test environment, collecting flight test data and comparing flight test data with analyses data

Job Responsibility

Act as an Aircraft Loads Applications Lead: elaborate mid to long term plans and coordinate their execution by supporting and providing technical leadership, mentoring, and training to a team of Aircraft Loads Professionals
Analyze complex Aircraft Loads problems and organize technical reviews to resolve complex investigations
Contribute to growing the Loads engineering Knowledge Domain by proposing the approaches and techniques to improve the efficiency and fidelity of aircraft loads simulations
Use engineering judgment on selecting the appropriate methods, techniques, and tools in resolving complex issues
Lead interface with other engineering disciplines such as Flight Characteristics, Structures, Mass Properties, Systems, Fly-By-Wire, Landing Gear and Flight Test
Perform analyses and simulations to compute aircraft design loads, in support of new aircraft design studies and continued airworthiness of in-service aircraft
Define restrictions and special instructions for flight test procedures based on loads and dynamics analyses
Provide Loads support for both flight test and in-service AOGs
Document analyses and findings in engineering certification reports
Support Aircraft Landing Gear development, analysis and test

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Maintenance Engineering Specialist Instrumentation

Perform all necessary Engineering Maintenance Instrumentation activities in MZLN...

Location

Italy , Milan; Afungi Site

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of higher education in Instrumentation or Electronic Engineering or equivalent with international standard and solid experience
Minimum 15 years specific maintenance experience in oil, gas or petrochemical industry
Minimum 7 years in LNG producing plants, not LNG terminals
Experience of working with equipment such as Centrifugal compressors control and anti-surge systems, Turbines control and protection, Natural gas processing control and instrumentation, Analytical instruments, DCS, PLC utilization requirements, Loading arms instruments, FGS maintenance practice
Excellent knowledge of Instrumentation equipment, systems integration and methods
Excellent knowledge of International Instrumentation safety systems standards (including ATEX / IECEx)
Excellent knowledge of international applicable codes & standards (IEC, IEEE, ANSI, API, EN, NEMA MG1 &2, ISO related to Instrumentation machinery and environment)
Good knowledge of maintenance SAP (like CMMS)
Good Knowledge of computer applications and methods
Excellent command of written and spoken English

Job Responsibility

Ensure safety of personnel, environment protection, and the technical integrity of equipment’s in his domain of activities, implement HSE rules and follow procedures
Occasionally participate in the near misses analyses, HAZOPs, technical reviews, risk assessment, safety audits, RCA, incidents and accidents analyses
Review periodically the preventive Instrumentation maintenance plans and adjust frequencies and tasks
Supervise and ensure the coherence of the scheduling of all Instrumentation work requests
Prepare and update monthly reports on key performance indicators (preventive, corrective, performance, cost, budget follow up)
Provide necessary guidance and technical expertise to all Instrumentation maintenance operations to achieve maintenance of facilities at minimum cost
Review documentation, procedures, safety manual and other related documents
Produce new procedures as necessary, in line with Company Maintenance Policy
Validate and approve maintenance procedures, ensure procedures are implemented
Ensure quality control of execution during maintenance activities

Fulltime

New

Senior Systems Specialist - Controls Engineering Automation

The Senior Systems Specialist - Controls Engineering is responsible for independ...

Location

India , Bangalore

Salary:

Not provided

Danaher Corporation

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electrical, Electronics, or Instrumentation & Controls Engineering required
A minimum of 8 years of industrial experience in the design and development of industrial automation and control software, including participation in the complete software development lifecycle
Experienced in designing Automation HMI/SCADA solutions, as well as diagnosing and programming programmable logic controllers (PLCs) on at least two platforms such as Aveva System Platform, Rockwell Automation FactoryTalk, DeltaV, Siemens, or similar
Strong experience with hardware interfaces, communication protocols, and PID control loops
Familiarity with Engineering Change Orders (ECO) & Engineering Change Requests (ECR), comprehensive knowledge of PLM tools such as MAGIC, ALM, Azure DevOps, Jira, or equivalent, and practical expertise in defect management, software verification, and testing

Job Responsibility

Oversee and actively contribute to all phases of the automation software development lifecycle, including conceptual design, detailed engineering, simulation/modeling, verification, and validation, ensuring alignment with project objectives and compliance requirements
Support the design, development, and lifecycle management of bioprocessing systems, aiding in the delivery of project milestones and advancing continuous improvement efforts
Lead and implement change management processes, including Engineering Change Requests (ECR) and Engineering Change Orders (ECO), in accordance with established quality and regulatory standards
Identify, assess, and resolve technical challenges, delivering effective solutions and promoting ongoing process enhancements
Provide technical leadership and mentorship to new team members, fostering a collaborative and high-performing work environment

What we offer

health care program
paid time off

Fulltime

Engineer Principal Specialist - Experimental Engineering for Aircraft and Ground Rigs

Location

United States , Wichita

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

More than 20 years of relevant experience in the field of experimental engineering for aircraft and ground rigs, focused on ground and flight test experience
Strong background in experimental engineering for aircraft and ground rigs for derivative and new aircraft programs
Strong communication skills, verbal and written
Bachelor or Master’s degree in engineering

Job Responsibility

Collaborate with leadership in creating and communicating a long-term vision, balance short- and long-term goals, and connect strategies to technologies for experimental engineering for aircraft & ground Rigs for new programs and strategic technologies activities
For new aircraft programs, support the definition of flight test instrumentation and airborne data acquisition systems
For new aircraft programs, represent experimental engineering for aircraft and ground rigs at the aircraft level in multidisciplinary teams and work groups
Lead experimental engineering for aircraft and ground rigs risk evaluation associated with complex projects, considering technical, financial, and operational factors
Collect lessons learned, ensure use of common approach across programs and identify areas of improvement and evolutions
Plan, update and expand the Bombardier Engineering System for experimental engineering for aircraft and ground rigs
Define experimental engineering for aircraft and ground rigs Knowledge Domain vision and development plan
Lead Strategic Technology initiatives related to experimental engineering for aircraft and ground rigs
Champion initiatives to build trust and knowledge sharing across experimental engineering for aircraft and ground rigs including connected disciplines and knowledge domains
Cultivate an academic and industry network and influence the development of emergent technologies and standards for experimental engineering for aircraft and ground rigs

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Engineering Technician Specialist

Astrion has an exciting opportunity for a Engineering Technician Specialist for ...

Location

United States , Huntsville

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

High School Diploma
0-5 Years of Experience
Active Secret Security Clearance
Experience working with research, development, and processing Ammunition and Explosives (A&E).

Job Responsibility

Maintain the ability to achieve appropriate A&E certifications to include: AvMC A&E Handler certification, respirator certification, forklift certification, and Commercial Drivers License (CDL).
Assist in the preparation of mixing ingredients using a variety of techniques including sampling ingredients for chemical analysis.
Submit inventory adjustments into Ammunition Tracking System (AMCATS) and assist with error resolution and correction.
With training and demonstrative proficiency, standard equipment operates such as mixers, ovens, vacuum pumps, process control instrumentation.
Properly disposes of hazardous waste generated during ingredient preparation or mixing processes.
Ensures environmental, health, and safety focus is maintained in explosive mixing operations.
Wear and work with various PPE and be safety aware.

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

Engineering Technician Specialist

Overview Engineering Technician Specialist LOCATION: Redstone Arsenal, Hunts...

Location

United States , Huntsville

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

High School Diploma
0-5 Years of Experience
Active Secret Security Clearance

Job Responsibility

Experience working with research, development, and processing Ammunition and Explosives (A&E)
Maintain the ability to achieve appropriate A&E certifications to include: AvMC A&E Handler certification, respirator certification, forklift certification, and Commercial Drivers License (CDL)
Assist in the preparation of mixing ingredients using a variety of techniques including sampling ingredients for chemical analysis
Submit inventory adjustments into Ammunition Tracking System (AMCATS) and assist with error resolution and correction
With training and demonstrative proficiency, standard equipment operates such as mixers, ovens, vacuum pumps, process control instrumentation
Properly disposes of hazardous waste generated during ingredient preparation or mixing processes
Ensures environmental, health, and safety focus is maintained in explosive mixing operations
Wear and work with various PPE and be safety aware

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

Select Country

Instrument Engineering Specialist

Job Description

Job Responsibility

Requirements

Looking for more opportunities?

Instrument Engineering Specialist

Instrument Engineering Specialist

Sr Engineering Specialist

Senior Engineering Specialist, Loads and Dynamics

Maintenance Engineering Specialist Instrumentation

Senior Systems Specialist - Controls Engineering Automation

Engineer Principal Specialist - Experimental Engineering for Aircraft and Ground Rigs

Engineering Technician Specialist

Engineering Technician Specialist

Our AI answers in your language