Installer I Job at Rentokil Initial (Des Plaines)

Installer I

Installs products such as insulation, doors, windows, stairs, cabinets, sinks, o...

Location

United States , FL

Salary:

Not provided

Builders FirstSource

Expiration Date

Until further notice

Requirements

Less than high school education
or up to one month related experience or training
or equivalent combination of education and experience
Must possess a valid driver's license and maintain an acceptable motor vehicle record (MVR) in accordance with company policy

Job Responsibility

Loads and unloads materials from truck onto work site
Cuts product to specified size, as needed
Installs parts in specified relationship to each other
Verifies trueness of structure
Applies latest building codes, industry standards and company policies in daily work
Stays knowledgeable of OSHA regulations, and applies safety requirements in daily work (e.g. wearing hard hats, steel toe work boots, fall prevention requirements, etc.)
May operate a company vehicle to transport materials, tools, and equipment to and from job sites as assigned
Other duties as assigned

What we offer

Competitive, affordable benefits designed to make life better for you and the people you love

Fulltime

Installer I

Ignite your career at Builders FirstSource, America’s largest supplier of buildi...

Location

United States , Berlin

Salary:

15.00 - 20.00 USD / Hour

Builders FirstSource

Expiration Date

Until further notice

Requirements

Less than high school education
or up to one month related experience or training
or equivalent combination of education and experience

Job Responsibility

Loads and unloads materials from truck onto work site
Cuts product to specified size, as needed
Installs parts in specified relationship to each other
Verifies trueness of structure
Applies latest building codes, industry standards and company policies in daily work
Stays knowledgeable of OSHA regulations, and applies safety requirements in daily work (e.g. wearing hard hats, steel toe work boots, fall prevention requirements, etc.)
Other duties as assigned

Fulltime

Installer I

Our Installers will prepare, load, deliver, and install several deliveries to ou...

Location

United States , Des Plaines

Salary:

18.00 - 25.00 USD / Hour

Rentokil Initial

Expiration Date

Until further notice

Requirements

Experience caring for plants is preferred
Experience interacting with clients
Regular lifting up to 50 lbs
Able to safely climb ladders and work on ladders up to 12 ft
Lift certification is a plus
Experience using pruners, scissors, and other sharp objects
Experience using drills, saws, and other power tools
Must possess a valid driver's license from the state of residence

Job Responsibility

Prepare, load, deliver, and install several deliveries to clients
Complete occasional warehouse tasks including plant receiving and preparation
Load service vehicle and exercise care in delivering plants and hardgoods to customer sites
Schedule delivery details/arrangements as required by the client
Regularly drive a delivery type van/truck in urban and rural settings
Maintain plants and hardware components of living green walls at various heights
Plant containers, vases, and planter beds with a wide variety of plants
Prevent damage to surrounding floors, walls, carpet, furniture, etc. during installation service
Deliver and install scenting and air purification equipment as necessary
Be available for occasional 'after-hour' project work

What we offer

Benefits Start Day 1 for Full-Time Colleagues
Medical, Dental, Vision, Disability, and Life Insurance
401(k) retirement plan with company-matching contributions
Vacation days & sick days
Company-paid holidays & floating holidays
Tuition Reimbursement benefits (for FT Colleagues)
Training and development programs available

Fulltime

Aircraft Mechanic II (UH-60)

The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range o...

Location

Kuwait , Kuwait City

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent is required
With a valid (FAA) A&P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required
All experience must be within the Five (5) most recent years
Without a valid (FAA) A&P certificate
Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required
All experience must be within the Six (6) most recent years
A Valid US Passport is Required for deployment to Kuwait
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment
Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment
Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance

Job Responsibility

Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Safely prepare aircraft for inspections and maintenance checks and services
Perform scheduled inspections and assist in performing special inspections
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation
Participate in maintenance test flights and operation checks as required
Perform other duties as requested

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Data Center Operations Technician Trainee

Are you excited about Server and Networking Technology and want to work in the L...

Location

Australia , Sydney

Salary:

Not provided

Amazon Pforzheim GmbH

Expiration Date

Until further notice

Requirements

Some exposure to IT hardware, networking, or technical support in any setting — including studies, personal projects, or hobbyist experience
Enthusiasm for technology and a desire to build a career in data center operations or IT infrastructure
Willingness to work in a hands-on technical environment using appropriate tools and equipment, including network testing equipment and electric lifting aids
Candidates should be able to perform the physical requirements of this role, which may include handling equipment
Ability to travel between data center sites as needed to support operational requirements and your professional growth
Valid driver's license is required
Good attention to detail and the ability to follow documented processes and procedures accurately
Strong communication skills — able to ask questions, listen carefully, and work well as part of a team
A responsible and professional attitude with a commitment to safety, quality, and reliability in delivering a consistent and high-quality customer experience

Job Responsibility

You will be trained in supporting data center infrastructure equipment including racks, servers, hardware components, networking devices and cables, following specific instructions and well-defined Standard Operating Procedures (SOP)
You will learn to perform routine operations such as rack installations, server break/fix, hardware component replacements, diagnosing hardware faults, troubleshooting network links and rack decommissioning with guidance and support
You will be trained in using Directed Workflow Instructions for hardware replacements and documenting all work in ticket tracking systems
You will learn to identify issue severity and work within stated Service Level Agreements (SLA), escalating when work deviates from established processes
You will be trained in inventory management tasks including receiving equipment, decommissioning hardware, liquidating racks or hardware components, and performing storage media (HDD, SSD) sanitization and destruction
You will learn how to operate in a high security environment, follow information security policies and physical safety practices, ensuring safe, secure work at all times
You will be trained in using technical documentation to find solutions and performing routine tasks following clear instructions
You will learn to work as part of a team performing similar tasks, collaborating with various AWS stakeholders

What we offer

Mentor(s) from day one
Structured skills framework with clear milestones and regular check-ins
Upon successful completion of the 6-month training programme, high-performing trainees will be considered for a permanent full-time Data Center Operations Technician role

Fulltime

Aircraft Mechanic I

The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landin...

Location

United States , Groton

Salary:

37.83 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Valid up-to-date A&P license. If no A&P license, shall have Three (3) years aviation maintenance experience. All experience must be within the Six (6) most recent years. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for a facility credentials/authorization at the work location. Tools are Required
must possess own shadowed/etched Tools and Toolbox.

Job Responsibility

Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems
Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments
Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction
Replaces or repairs worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment
Removes engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft
Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes
Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair.

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Maintenance Mechanic Lead - 2nd Shift

This position is responsible for leading and organizing a team of maintenance te...

Location

United States , Oakland

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
3-5 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Effectiveness in prioritizing assigned duties and evaluating the work of personnel
Outstanding skills for offering training and leadership to staff for them to be able to successfully carry out diverse duties associated with the building trades
Ability to interpret, illustrate, and apply regulation codes and rules
Outstanding ability to interpret sketches, blueprints, and work orders to other personnel
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills

Job Responsibility

Instructs and offers guidance and directives to a team of maintenance technicians while being involved in one or more of the skilled activities
Gives support to supervisor and/or manager in regards to accomplishing tasks while referring uncommon technical issues to the supervisor
Offers inputs into maintenance technician performance evaluations since the lead role oversees the duties of assigned maintenance technicians
Designates and monitors the work of maintenance personnel in order to complete scheduled/planned work activities while keeping mechanical downtime to a minimum level to achieve department's commitments and targets
Guarantees adherence to safety practices and principles, and to the relevant Federal, State, and Local codes and promotes a safe work environment
Ensures the maintenance of equipment, tools and other belongings in a clean, secure, and appropriate working condition and for the maintenance shop to be neat and clean
Maintains, troubleshoots and repairs various production equipment systems and devices and performs building and grounds maintenance and facility repairs as needed to include carpentry, plumbing, and painting
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime, and identify opportunities for improvement
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Performs high quality work that meets Industry accepted maintenance practices to maintain compliance with external regulatory agencies

Fulltime

Solution Architect

We are looking for a customer-centric Solutions Architect to promote the use of ...

Location

United States , Austin

Salary:

Not provided

Aiven Deutschland GmbH

Expiration Date

Until further notice

Requirements

Experience working in technology, software sales, pre-sales or consulting
Fluency in one or more programming languages such as Java, Python, Go or Ruby
Ability to translate complex technical jargon into clear, persuasive business value for non-technical buyers
Knowledgeable of public clouds (AWS, Google or Azure) and in the areas of compute, storage - block and object, networking, and security groups
Linux operating system
demonstrable experience using various Linux utilities and tools (installation, securing system, storage, etc.) and a good grasp of networking basics like DNS
Hands-on experience with search-engine ecosystems (OpenSearch, Elasticsearch, or Lucene)
Understanding of streaming frameworks: Proficiency with tools like Apache Kafka, Apache Flink, Apache Spark Streaming, or AWS Kinesis
Understanding storage systems: Familiarity with distributed storage, NoSQL databases, and data lakes
Attention to detail and good problem solving and project management skills

Job Responsibility

Champion the customer journey, fostering trusted partnerships from pre-sales strategy through implementation and long-term adoption
Assess customer needs, pain points, and strategic goals to ensure the proposed product is a viable fit
Design and deliver customized, high-impact technical presentations and product demos for various stakeholders
Manage pilot programs or POC evaluations to prove the value and technical feasibility of the solution
Respond to the technical and functional sections of Requests for Proposals (RFPs) and vendor assessments
Act as the voice of the customer by relaying market feedback and feature requests to the Product and Engineering teams
Be an ambassador for Aiven by various means such as writing technical blogs, conducting webinars, sponsor meetups, or technical talks at conferences
Travel up to 10% of the time

What we offer

Participate in Aiven’s equity plan
Hybrid work policy
Get the needed equipment to set yourself up for success
Step up your career game with real employer support (use one of our learning platforms, annual learning budget, and more)
Get holistic wellbeing support through our global Employee Assistance Program
Contribute to open-source projects that you find meaningful outside of work - and get paid for it! Our Plankton program recognizes extra work to the open source ecosystem for developers and non-developers alike
Use up to 5 days per year to volunteer for a good cause of your choice
Join one of our team member resource groups
Comprehensive health insurance options including dental and vision benefits and Life and AD&D insurance
Health savings account with Aiven contributions, as well as short and long term disability plans that protect you if you’re unable to work

Fulltime

Select Country

Installer I

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Installer I

Installer I

Installer I

Installer I

Aircraft Mechanic II (UH-60)

Data Center Operations Technician Trainee

Aircraft Mechanic I

Maintenance Mechanic Lead - 2nd Shift

Solution Architect

Our AI answers in your language