CrawlJobs Logo
McDermott Logo McDermott · IT - Software Development

Installation Analysis Engineer

Malaysia, Kuala Lumpur · Job Posted March 21, 2026
Apply Position
Job Link Share

Job Description

The Installation Analysis Engineer applies their conceptual knowledge of Installation Analysis and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Installation Analysis problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Installation Analysis Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.

Job Responsibility

  • Perform FEED, Studies, and detailed design engineering, analysis, and calculations on more complex and demanding engineering tasks
  • Apply knowledge and skills to complete varied assignments
  • Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
  • Prioritize and organize own work to meet deadlines
  • Focus on completing work within budgets
  • Communicate and explain information in straightforward engineering activities
  • Gain familiarity with the project scope of work, specifications, schedule, and all inter-discipline requirements
  • Recognize changes to scope and notify the Discipline Lead Engineer
  • Interface with all disciplines to develop clash free designs
  • Interface with other departments to obtain input for Discipline designs and drawings
  • Document substantive communications and forward copies to Discipline Lead Engineer and Discipline Manager
  • Provide required bid inputs as directed
  • Prepare sketches of detailed design to guide Designers
  • Assist procurement personnel in producing discipline equipment, materials, and services
  • Review MTOs for requisitions
  • Assist in updating weight report based on receipt of vendor information
  • Check drawings
  • Check engineering performed by others within the Discipline
  • Review vendor subcontractor submittals
  • Perform design verification through single-discipline checks and assist with inter-discipline checks (IDC)
  • Keep the Lead Engineer apprised of all activities, progress, and concerns
  • Check final subcontractor and vendor data manuals
  • Capture lessons learned and enter into MDR’s Lessons Learned system
  • Develop an awareness of costs related to own work and of the discipline
  • In FabCSE, perform/review designs, analyses, evaluations, calculations, and procedures

Requirements

  • Bachelor’s degree in Naval Architecture, Civil/Structural/Mechanical Engineering (Master’s degree preferred)
  • 3-8 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design
  • Familiar with the content and application of standards, codes, and guidelines as applicable
  • Knowledge of many basic design techniques and analysis methods
  • Preferably Registered Engineer in Training (ElT) or member of a professional engineering society

Nice to have

  • Perform pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transporting and installing (including installation aids)
  • Perform Structural Installation Engineering designs, analyses, evaluations, calculations, and procedures for loadout, transportation, and installation (including installation aids) of offshore structures, including barge upgrades/modifications
  • Perform Naval Architecture engineering designs, analyses, evaluations, calculations, and procedures related to all aspects of marine operations covering loadout, transportation, and installation, including barge upgrades
McDermott - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Installation Analysis Engineer

8 matching positions

Principal Installation Analysis Engineer

Lead complex installation analysis for offshore oil & gas projects. This senior-...
Location
Location
Malaysia , Kuala Lumpur
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Naval Architecture, Civil, Structural, or Mechanical Engineering (Master’s preferred)
  • 15–20 years’ experience in offshore oil & gas installation design
  • Strong knowledge of design codes, standards, and EPC project execution
  • Preferably a Registered Professional Engineer or member of a recognized engineering society
Job Responsibility
Job Responsibility
  • Perform and review installation engineering designs and analyses for pipelines, risers, spools, subsea structures, and offshore platforms
  • Prepare design reports, procedures, and technical specifications
  • Interface with multidisciplinary teams, vendors, and clients
  • Lead project-based discipline activities, audits, and design reviews
  • Mentor junior engineers and ensure compliance with standards and project requirements
  • Fulltime
Read More
Arrow Right

Installation Engineer

In 2007, Bühler (Wuxi) Commercial Co., Ltd. was established in Wuxi, Jiangsu Pro...
Location
Location
China , Wuxi
Salary
Salary:
Not provided
buhlergroup.com Logo
Bühler Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or higher degree，Electrical, mechanical or a related background
  • At least 3 years of relevant experience in the assembly, commissioning, or after-sales service of twin-screw extruders or lithium battery slurry preparation equipment
  • Ability to read and understand mechanical drawings and electrical schematics, with a good foundation in mechanical fitting and electrical skills
  • Ability to write and read English
  • Familiar with commonly used office software, such as Microsoft Word, Excel, and Outlook
  • Hard working， strong practical ability
  • Good team-working and capability of working independently
  • Good at find out problems, analyze the reason and solve problems
  • Strong initiative and learning willingness
  • Strong ability to work under pressure and willing to travel long-term
Job Responsibility
Job Responsibility
  • Be responsible for equipment installation, commissioning, and final handover in accordance with technical agreements, drawings, and project schedules, ensuring on-time project delivery
  • Coordinate on-site activities during production line installation and commissioning, monitor equipment performance and test results, and prepare relevant technical documentation and reports
  • Respond promptly to technical issues arising during customer production, provide both on-site and remote technical support, and help ensure stable production operations
  • Work closely with Laboratory, Sales, Engineering, and other relevant functions to provide technical support and facilitate effective execution of projects and customer requirements.
What we offer
What we offer
  • Career and personal development
  • Attractive insurance coverage
  • Free lunch
  • Shuttle bus service
  • Supplementary housing fund
  • Team and social events
  • Fulltime
Read More
Arrow Right

Sr. Structural Analysis Engineer, Test

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
Not provided
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience with NX and/or FEMAP/Nastran software
  • Strong fundamentals in structural and mechanical analysis
  • Experience with Data Acquisition Software (LabVIEW, MTS, Load Star)
  • Prior hands-on experience with aircraft design, analysis, or structural testing
  • Solid problem skills and the ability to make decisions quickly
  • Experience using Instron, MTS, or other testing systems
  • Experience with electronics, circuitry, soldering
  • Ability to lift 50lb
  • Ability to travel up to 25% of the time
  • Knowledge of FAA aircraft certification test requirements for Part 23 / Part 27 aircraft
Job Responsibility
Job Responsibility
  • Create and review drawings, define project plans, procure parts, materials and equipment
  • Manage suppliers to design test fixtures and execute test programs
  • Create instrumentation definition, calibrate instrumentation, and install instrumentation
  • Lead small test teams to drive programs to completion
  • Collaborate multi-disciplinary teams including design, loads, M&P, and analysis teams to define tests which validate design details
  • Develop and review company and FAA test plans and test reports for static and fatigue testing
  • Collect and analyze data from testing
  • Design test stands, fixtures, DAQs
  • Define testing procedures, SOPs, and best practices
  • Enforce safety and test protocol in the structural test lab
  • Fulltime
Read More
Arrow Right

Field Engineer (Transportation & Installation)

We are currently exploring potential candidates for an upcoming role at McDermot...
Location
Location
Malaysia , Kuala Lumpur
Salary
Salary:
Not provided
mcdermott.com Logo
McDermott
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's Degree in Engineering
  • 3-5 years of offshore installation experience
  • 3-5 years of experience in the oil and gas industry with Major Contractors or a consultant
  • Knowledge in Auto CAD or similar tools
  • Adequate knowledge of design and offshore project execution
  • Basic knowledge in Microsoft tools like Word, Excel, PowerPoint, etc., and any 3D software experience
  • Strong analytical and problem-solving abilities
  • Willingness to travel to different job sites and work in various environmental conditions as required
  • Extensive knowledge & experience of offshore EPCI / Transportation and Installation projects including execution, safety management, budget control, schedule control and quality control management
  • Familiar with international codes and standards
Job Responsibility
Job Responsibility
  • Ensure that all work is carried out safely in compliance with Quality, Health, Safety, & Environment policies and procedures
  • Readiness to travel offshore for job execution, including willingness to be at the onshore site as required
  • Recommend changes in the technical details and drawings where these may result in safe operations and clarity on information in the installation procedures
  • Develop the vessel layout and barge loadout plans for the transportation of materials, equipment, and structures offshore to facilitate safe and timely installation
  • Actively participate in project Constructability sessions, Readiness reviews, Hazard Identification studies, or Job Safety Analysis as applicable, and communicate to implement the recommendations
  • Review and retain project drawings and documents, report the discrepancies, errors, and omissions concerning the information required to perform the work
  • Ensure the work is within the capabilities of the proposed equipment
  • Prepare offshore installation procedures as per the Company Procedures and Processes
  • Prepare a material list covering the construction materials and project consumables, and liaise with the project coordinator for the procurement
  • Issue 'Loadout Lists' applicable to the work based on the recommended practice
  • Fulltime
Read More
Arrow Right

Field Engineer (Transportation & Installation)

We are currently exploring potential candidates for an upcoming role at McDermot...
Location
Location
Malaysia , Kuala Lumpur
Salary
Salary:
Not provided
mcdermott.com Logo
McDermott
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Engineering
  • 3-5 years of offshore installation experience
  • 3-5 years of experience in the oil and gas industry with Major Contractors or a consultant
  • Knowledge in Auto CAD or similar tools
  • Adequate knowledge of design and offshore project execution
  • Basic knowledge in Microsoft tools like Word, Excel, PowerPoint, etc., and any 3D software experience
  • Strong analytical and problem-solving abilities
  • Willingness to travel to different job sites and work in various environmental conditions as required
  • Extensive knowledge & experience of offshore EPCI / Transportation and Installation projects including execution, safety management, budget control, schedule control and quality control management
  • Familiar with international codes and standards
Job Responsibility
Job Responsibility
  • Ensure that all work is carried out safely in compliance with Quality, Health, Safety, & Environment policies and procedures
  • Readiness to travel offshore for job execution, including willingness to be at the onshore site as required
  • Recommend changes in the technical details and drawings where these may result in safe operations and clarity on information in the installation procedures
  • Develop the vessel layout and barge loadout plans for the transportation of materials, equipment, and structures offshore to facilitate safe and timely installation
  • Actively participate in project Constructability sessions, Readiness reviews, Hazard Identification studies, or Job Safety Analysis as applicable, and communicate to implement the recommendations
  • Review and retain project drawings and documents, report the discrepancies, errors, and omissions concerning the information required to perform the work
  • Ensure the work is within the capabilities of the proposed equipment
  • Prepare offshore installation procedures as per the Company Procedures and Processes
  • Prepare a material list covering the construction materials and project consumables, and liaise with the project coordinator for the procurement
  • Issue "Loadout Lists" applicable to the work based on the recommended practice
  • Fulltime
Read More
Arrow Right

Installation Time Methodology Engineer

MISSION: develop, maintain, and implement the standardized time estimation metho...
Location
Location
Germany;Spain , Rostock;Madrid
Salary
Salary:
Not provided
nordex-online.com Logo
Nordex Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor´s degree in Engineering or a related STEM field (Master´s degree is a plus)
  • Experience in process engineering, industrial engineering, or a related field. Understanding process optimization techniques, including methods and installation procedures
  • Experience in the wind industry or a similar manufacturing environment is preferred
  • Microsoft Office (Word, Excel, PowerPoint), MS Project
  • Methods Time Measurement (MTM)
  • Process engineering
  • Process optimization
  • Workload balancing
  • Production KPIs
  • Data analysis (Excel advanced, Power BI), Python for process automation, SQL (queries, data modelling), Database management (SQL Server, PostgreSQL, MySQL), Data structures for industrial processes, API integration, VBA scripting (Excel/Office automation), Basic ETL workflows, PLM/ERP data handling, Version control (Git), JSON/XML data structuring, Knowledge of simulation or modelling tools (process simulation, discrete event modelling)
Job Responsibility
Job Responsibility
  • Develop, structure and update the Times Methodology, ensuring alignment with MTM based standards, Nordex information levels, and Nordex frameworks
  • Define, calculate and validate times at all process levels (Step Task RM Phase WTG WF), ensuring consistency, traceability and data integrity
  • Build and maintain the times database, including parameters, resources, prerequisites, weather thresholds and resource movements
  • Support the creation and synchronization of Road Maps (RMs), ensuring workload balancing, shift alignment, sequencing logic, and compliance with installation strategies
  • Collaborate with PM Technology, Tendering, IPT, Quality, HSE and other stakeholders to ensure full digital continuity across all NX systems
  • Analyze process data to identify improvement opportunities and contribute to standardization, efficiency gains, and methodology evolution
  • Provide expert guidance during pilot tests, rollouts and continuous improvement cycles for new Nordex methodologies
  • Ensure harmonization between documentation (Installation Manuals, tasks, steps) and time estimation processes within the single source of truth philosophy
  • Support system integration topics defining requirements, interfaces, and data flow
  • Contribute to the maturity process of installation methodologies, ensuring proper assumptions, parameter definitions and version development across all releases (V0 to Final)
What we offer
What we offer
  • In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by location
  • Fulltime
Read More
Arrow Right

EHS Specialist (Safety Engineer for EUV Installation)

As an EHS Specialist in the EUV install organization, you will be responsible fo...
Location
Location
South Korea , Hwasung
Salary
Salary:
Not provided
asml.com Logo
ASML
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree or above in EHS-related, engineering field
  • Around 8 - 13 years of experience in EHS or equivalent engineering experience, particularly in installation and set-up environments preferred
  • Experience collaborating with on-site engineers is preferred
  • Proficient in written and verbal English
  • Motivated, proactive, self-driven, and adaptable
  • Strong analytical and abstract thinking abilities
  • Excellent communication and teamwork skills
  • Demonstrates initiative and independence
  • Effective at knowledge sharing
  • High stress tolerance
Job Responsibility
Job Responsibility
  • Ensuring safe working practices and compliance with safety requirements
  • Training and instructing EUV install engineers on tech-related safety issues
  • Investigating and following up on accidents, incidents, and near misses
  • Participating in safety community activities
  • Escalating safety issues to EHS and local CS management when necessary
  • Reviews and monitors local EHS compliance and regulatory updates
  • Collaborates with customer representatives to ensure alignment with all applicable customer EHS requirements
  • Ensures ongoing conformity with ISO 45001 by maintaining the site safety management system
  • Supports internal and external audits
  • Leads comprehensive incident response activities, including reporting, investigation, root‑cause analysis, and implementation of corrective actions
  • Fulltime
Read More
Arrow Right

Offshore Structural Engineer – Finite Element Analysis

The role involves offshore structural analysis using global structural models an...
Location
Location
France , Nanterre
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in suction-anchor design and structural assessment
  • Knowledge of subsea installation principles
  • Familiarity with ISO and DNV structural standards
  • Proficiency with offshore structural analysis software (e.g., ABAQUS, NSO-type tools)
  • Ability to follow structured documentation and compliance procedures
  • Technical English skills
  • Minimum 2 years as a structural engineer on EPC projects involving suction-anchor systems
Job Responsibility
Job Responsibility
  • Perform structural modelling using global analysis tools
  • Build detailed 3D finite-element models using ABAQUS or equivalent software
  • Carry out regulatory structural checks for lifting, transport, installation, and in-place conditions
  • Design necessary reinforcements or structural modifications
  • Prepare calculation reports summarizing analyses
  • Transfer validated data for drafting and drawing production
  • Apply project procedures, engineering rules, and documentation workflows
  • Coordinate with other engineering disciplines
Read More
Arrow Right