Inspection Associate Job at Bureau Veritas Certification CZ, s.r.o. (Orlando)

Fabric Preparation & Inspection Associate

The Tunnel Preparation Associate handles and inspects soft shades before and aft...

Location

United States , Augusta

Salary:

15.00 USD / Hour

Hunter Douglas

Expiration Date

Until further notice

Requirements

High school graduate or equivalent
Able to read and use a tape measure accurately
Basic knowledge of fabrics and textile handling
Ability to use hand tools safely and effectively
Successfully pass a color vision test
Strong attention to detail and accuracy with names, numbers, and spelling
Capable of standing for long periods and lifting on a continuous basis
Follows written and verbal instructions reliably
Safety-conscious and aware of workplace hazards
Able to maintain a clean and organized work area

Job Responsibility

Receive soft shades from Flat Prep and verify fabric type and lining
Measure width and length of shades according to work tickets
Check pattern match and inspect for puckering or looseness
Remove staples and pins as needed
Prepare shades for and inspect them after processing through the Tunnel Machine
Use hand tools and equipment safely, maintaining an organized work area
Follow written and verbal instructions to meet production and quality standards
Report any unsafe conditions, accidents, or quality issues to supervisors
All other duties as assigned

What we offer

Generous benefits package including medical, dental, vision, life, disability
A company culture that prioritizes internal development and professional growth
Time off with pay
401(k) plan with a degree of employer matching
Paid parental leave
Wellness programs and product discounts

Fulltime

Associate Quality Ops Tech (Vendor Inspection Coordinator)

The Associate Quality Ops Tech is an entry-level position, and their work is com...

Location

United Arab Emirates , Dubai

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

High school diploma
2+ years of experience in Personnel Administration or related experience
Typing and working knowledge of MS Office
Effective interpersonal, verbal, and written communication skills

Job Responsibility

Assist Senior Quality Operations Specialist-Offshore QC Coordination in preparation, maintenance, and update of offshore assigned personnel schedule, safety training status, the readiness of travel documents, and arrangement
Maintain and update sub-contractor details, including inspection personnel approval, mobilization schedule, safety training status, travel tickets, weekly/monthly timesheet, follow-up of updated CVs, vacation schedule during the offshore assignment, and track record
Assist in preparation of weld consumable requisition in coordination with the welding engineering, maintain the track record of welding consumables being sent offshore as per project requirement
Arrange to send all welding consumables with relevant documents to the respective offshore locations/barge as per the guidance of the Senior Quality Operations Specialist/Welding Engineering
Follow-up QA/QC document/inspection equipment movement for the offshore project and handling over the respective personnel as per the direction and guidance of the Senior Quality Operations Specialist-Offshore QC Coordination
Prepare support documents and schedule as required to support the offshore activity as per the guidance of the Senior Quality Operations Specialist-Offshore QC
Ensure that the personnel data and visa request forms are accurately prepared and verified before submission for further process
Assist in arranging the air ticket and necessary visa for all offshore assigned personnel within the QC department as directed
Maintain a record of security gate passes issued for the sub-con personnel who are coming for the work/visit, arrange their safety induction and orientation training as applicable
Assist Principal Quality Operations Specialist-Offshore QC Coordination to verify vendor invoice and approval from Director Assurance and PMT by attaching Service Work Orders before forwarding submission to Accounts Payable for final clearance and payment

New

System Build Technician (DUV Laser system)

Cymer technician performs assembling equipment in a production line for DUV lase...

Location

South Korea , Pyeong-Taek

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

High School diploma or Associate degree in relevant field
2~4 years of mechanical or electrical assembly where troubleshooting is required
Prefer to have an experience about electric devices, modules and any physical assembles
Familiarity with assembly tools and equipment
Ability to handle physical workload
Understand demand plan and On-time delivery flow
Ability to work independently and with minimal direction or supervision
Commitment to work safely in all aspects of the position
Able to understand and read working instructions and diagrams
Must be able to work any shift if needed

Job Responsibility

DUV 레이저 시스템 생산 라인에서 장비 및 전기·기계 모듈 조립을 수행하고, 기본적인 트러블슈팅을 통해 안정적인 생산을 지원
Use of various electrical measuring devices and tools
Experience in assembling high-capacity electrical modules
Meet specifications, produce a quality product, work defect free work and meet production goals
Production operators to train and/or perform the tasks of the other associates in the area as needed
Communicate with other operators and supervisor to discuss any problems
Support other functions within the team/department
Must be able to work with others in a team environment
Place safety in the workplace above all else and follow safety guidelines
Work overtime and other duties as needed

Fulltime

New

Civil/Structural Designer – Transmission and Distribution Station Designs

Assigned to the Transmission, Distribution, and Energy production department as ...

Location

Canada , Mississauga

Salary:

Not provided

Artelia

Expiration Date

Until further notice

Requirements

Recognized university degree, technical diploma, or technologist with preference given to direct experience in civil/structural engineering and quality assurance, QC inspections, and methods
Registration as CET or Equivalent
3 to 5 years of relevant experience
Familiar with the major design codes and standards
Skilled in 2D and 3D drafting and design, structural / foundation analysis and design software
Practical experience with AutoCAD (2D & 3D), Civil 3D, Revit, and MS Office Suite
Efficient organizational abilities in writing reports and estimates
Excellent efficiency in written and spoken English
Excellent communication skills and able to respect deadlines
Good team player and good sense of priorities

Job Responsibility

Perform drafting for detailed conceptual plans, engineering designs, and the associated drawings for civil/structural work, regarding low, medium, and high voltage electrical transformers and distribution stations
Perform the associated analysis and structural calculations
Perform the design and drafting of structural detailed engineering and feasibility concept designs
Excel in steel and concrete designs as per the analysis codes and 3D designs used in Canada and internationally
Drafting skills in AutoCAD (2D and 3D, and Revit for the preparation of drawings
Occasional on-site visits
Perform hydraulic calculations and participate in the preparation of the report for approval with MOECP
You will develop an expertise in energy transmission and distribution in LV, MV, and HV Markets

What we offer

Retirement savings plan with employer contribution
Reimbursement of professional contribution fees
Telework policy with a $500 allowance
Group insurance program starting on day one, including telemedicine
Health management account
Employee and family assistance program (EFAP)
Flexible working hours
Hourly employees' time bank
Continuing training
Career and development opportunities

Fulltime

New

Pump Engineer

Pump Engineer/ Pump Technician - Due to continuing growth, we require a Pump Eng...

Location

United Kingdom , London

Salary:

Not provided

Vital Energi Utilities Limited

Expiration Date

August 28, 2026

Requirements

Hold a city & guilds qualification or equivalent
Experience with mechanical seals, bearings and pressurisation units
Full UK manual driving licence

Job Responsibility

Install, maintain, and repair various pump systems including centrifugal, booster, and submersible pumps used in heating, cooling, and energy systems
Carry out fault finding and diagnostics on mechanical pump systems, identifying and resolving issues to minimise downtime and optimise performance
Work from technical drawings, specifications, and schematics to ensure precise installation and alignment of pump units and associated pipework
Collaborate with project and design teams to support the commissioning of new energy systems and infrastructure projects across commercial and industrial sites
Conduct routine service inspections and preventative maintenance in line with company schedules and health & safety regulations
Maintain accurate service records and documentation for compliance and quality assurance, reporting any operational risks or system inefficiencies

What we offer

Salary negotiable DOE
Contributory Company Pension Scheme
Non-contributory death-in-service insurance
Employee Assistance Programme
25 Days Holiday plus 8 days bank holidays
Additional holidays awarded in line with length of service
Option to purchase/sell additional holidays
Onsite gym/wellbeing centre at our Blackburn Head Office
Discounted gym membership across the UK
EV charging points where possible

Fulltime

New

Sr Manager, Quality Assurance

This is where you make a difference in our patients’ safety. As a member of the ...

Location

United States , Cleveland

Salary:

136000.00 - 170000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Microbiology, Biology, Chemistry, or Engineering, or equivalent experience, required
5+ years of Engineering/Manufacturing/Quality experience required, with 3-5 years of leadership experience

Job Responsibility

Lead quality oversight for the Devices areas
Develop, assign, and implement systems, procedures, and policies to ensure compliance with ISO Standards, cGMP's, FDA regulations, and company policies
Conduct audits and implement changes to specifications, SOPs, and forms for regulatory compliance and process improvement
Ensure product compliance through established inspection criteria and procedures
Coordinate inspection activities throughout the production cycle
Analyze statistical data and product specifications to determine and improve quality standards
Prepare and submit reports to Managers and other Departments or Agencies as required
Communicate quality philosophy to key personnel
Actively participate in quality management teams within the organization
Manage and support area associates, encouraging a teamwork environment

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

New

Production Technician I, Fill

This is where my hands make life-sustaining products. You are driven by the know...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills
Pass the Powered Industrial Truck (P.I.T.) physical
Normal visual acuity and the ability to distinguish color are necessary
Ability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, kneel, twist and bend at the neck, twist and bend at the waist and balance

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Complete batch/code changes, tank changes, as well as sub lots as needed
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine's performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

New

Production Associate, Fill

The Production Associate, Fill is an Hourly Non-Exempt position which contribute...

Location

United States , Marion

Salary:

19.90 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent
Must be at least 18 years of age
Possess or be able to obtain Inspector Certification
Basic English written and oral communication skills
Understand verbal and written safety and quality instructions
Ability to perform basic mathematics
Continuous grasping, pushing/pulling up to 40 pounds for a distance up to 50 feet
Reaching with hands and arms up to 18 inches
Lifting and carrying on average up to 12 pounds frequently throughout shift
Normal visual acuity and ability to distinguish color

Job Responsibility

Inspect, print, fill, and seal flexible containers containing IV therapies, premixed drugs, renal therapies and other sterile solutions
Fill, assemble and plug flexible containers with solutions or premixed drugs at a rate consistent with production needs
Print labeling and bar code information on flexible containers using computerized printer
Maintain printer by replacing printer foil, ribbon and making minor adjustments
Supply filling stations with printed bags and other supplies
Inspect printed bags and their components to meet quality standards
Perform and document scheduled cleaning activities
Perform scheduled quality checks using gauges and scale
Learn, understand, and apply rigorous quality standards, SOPs and cGMP
Notify supervisor of safety, quality, mechanical or discrepancy issues

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Select Country

Inspection Associate

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?