CrawlJobs Logo
SIG Group Logo SIG Group · Manufacturing

Injection Mold Technician

United States · Job Posted May 15, 2026
Apply Position
Job Link Share

Job Description

The Mold Tech executes daily activities that support the quality of production, flow of materials, maintenance of equipment and cleanliness of the work environment. The Process Engineer and/or Technical Manager fulfills this role when vacant. 12 months in this position with all of the requirements completed and demonstrated before eligible for promotion to Level 2.

Job Responsibility

  • Keep floors clean, mopped, and free of parts, material and debris
  • Complete the Daily Mold Condition sheets, cavitation sheets, and the silo log
  • Weigh and record scrap parts, separate scrap types and dispose of in the proper location
  • Enter Injection Molding production and scrap numbers into the Daily Production Report
  • Assist Supervisor to complete 5W&1H on the Reaction Sheet
  • Verify resin and masterbatch lot information and verify correct material for the parts being produced
  • Locate and transport resin and masterbatch to support production
  • Assist the Maintenance department as needed
  • Assist Tooling Tech with out-of-press Mould PM’s in a supervised environment
  • Assist Process Engineer with short term projects
  • Keep the Mould Tech’s toolbox clean and organized
  • Maintain good condition of tools along with keeping track of the tools
  • Notify the Process Engineer if there are any condition issues with molds, tools, or machinery
  • Completion of Paulson Training, Injection Molding Fundamentals section with an 80% or higher grade
  • Must be able to demonstrate an understanding of the Paulson Fundamentals Training skills in a production environment
  • Identification, storage, and handling of materials
  • Proper purging procedures
  • Part defect identification
  • Identification of the different types of moulds and runners/gates
  • Proper machine and mold safety
  • Any other duties as assigned by management.

Requirements

  • High school diploma or G.E.D. required
  • Minimum 2-year technical degree or equivalent work experience in a related field
  • Minimum 10+ years related experience and/or training
  • Proficiency in maintaining automation equipment
  • Experience with project management
  • Ability to troubleshot equipment and perform complex system tests
  • Strong leadership and problem-solving skills
  • Excellent organizational skills
  • Ability to communicate well with other members of the development team
  • Must be able to move and/or lift up to 50 pounds occasionally
  • Frequently standing, walking and sitting
  • Frequently required the use of hands to finger, feel, reach or handle machinery
  • Frequently bend, stoop and reach
  • Completion of Paulson Training, Injection Molding Fundamentals section with an 80% or higher grade
  • Must be able to demonstrate an understanding of the Paulson Fundamentals Training skills in a production environment

What we offer

  • Day 1 Benefits Enrollment
  • Retirement 401K Matching
  • Employee Assistance Program
  • Identity Theft Protection Plan
  • Tuition Reimbursement
  • $2.00 night premium
SIG Group - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Injection Mold Technician

8 matching positions

Injection Mold Technician

Mold Tech executes daily activities that support the quality of production, flow...
Location
Location
United States
Salary
Salary:
26.00 USD / Hour
sig.biz Logo
SIG Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or G.E.D. required
  • Minimum 2-year technical degree or equivalent work experience in a related field
  • Minimum 10+ years related experience and/or training
  • Proficiency in maintaining automation equipment
  • Experience with project management
  • Ability to troubleshot equipment and perform complex system tests
  • Strong leadership and problem-solving skills
  • Excellent organizational skills
  • Ability to communicate well with other members of the development team
  • Must be able to move and/or lift up to 50 pounds occasionally
Job Responsibility
Job Responsibility
  • Keep floors clean, mopped, and free of parts, material and debris
  • Complete the Daily Mold Condition sheets, cavitation sheets, and the silo log
  • Weigh and record scrap parts, separate scrap types and dispose of in the proper location
  • Enter Injection Molding production and scrap numbers into the Daily Production Report
  • Assist Supervisor to complete 5W&1H on the Reaction Sheet
  • Verify resin and masterbatch lot information and verify correct material for the parts being produced
  • Locate and transport resin and masterbatch to support production
  • Assist the Maintenance department as needed
  • Assist Tooling Tech with out-of-press Mould PM’s in a supervised environment
  • Assist Process Engineer with short term projects
What we offer
What we offer
  • Day 1 Benefits Enrollment
  • Retirement 401K Matching
  • Employee Assistance Program
  • Identity Theft Protection Plan
  • Tuition Reimbursement
  • Fulltime
Read More
Arrow Right

Injection Mold Process Technician

Injection Mold Process Technician position for a Medical Device Company. 12-mont...
Location
Location
United States , Research Triangle Park
Salary
Salary:
21.00 - 25.00 USD / Hour
gomillenniumsoft.com Logo
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 2-5 years of experience in a similar type of position working in the Plastics Industry
  • injection molding processes
  • 2-5 years of previous injection molding process experience
  • Proficient skills in reading, writing, and arithmetic
  • Strong mechanical abilities & knowledge- preferably in the Plastics Industry, with experience in Injection Molding
  • Excellent analytical and problem-solving skills
  • candidate needs to be very detail-oriented
  • Excellent troubleshooting skills
  • Excellent computer skills
  • Strong communication skills interacting with all levels of a company’s hierarchy
Job Responsibility
Job Responsibility
  • Perform and direct the mold and material changeovers
  • Develop new mold processes for prototypes and production molds
  • Assure that mold setup, changeovers, and housekeeping standards are met
  • Ensure new job start-ups are correct, making any necessary adjustments
  • Work with molding personnel to ensure molded parts meet expected requirements, and adjust if necessary
  • Troubleshoot processing problems and work through issues
  • Verify process parameters and implement changes
  • Inspecting parts to ensure they meet specifics
  • Stop mold samplings to correct any quality issues that may arise
  • Review and inspect machines daily for maintenance issues and report to the maintenance department
  • Fulltime
Read More
Arrow Right

Tooling Technician (Mold Maker)

Maintain all tooling and support production with mold repair/maintenance operati...
Location
Location
United States , Buffalo Grove
Salary
Salary:
25.00 - 40.00 USD / Hour
nemera.net Logo
Nemera
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • 5+ years of experience in mold making, mold design, and/or mold processes strongly preferred
  • Ability to lift up to 35 lbs.
Job Responsibility
Job Responsibility
  • Support and maintain all policies of the company including but not limited to ISO Standards, Health and Safety Requirements, Continuous Improvement, as well as standard work procedures
  • Interact with engineering, production, and tooling staff when troubleshooting molds
  • Identify solutions to complex molding and mold problems as they pertain to injection molding manufacturing
  • Create work orders for service of all molds and maintain records as required
  • Coordinate the implementation of solutions for needed repairs
  • Verify molds are production ready
  • advise production and engineering of condition of molds
  • Train others on operation of equipment in the Tool Repair department
  • Other duties as assigned.
  • Fulltime
Read More
Arrow Right

Tooling Technician (Mold Maker)

Maintain all tooling and support production with mold repair/maintenance operati...
Location
Location
United States , Buffalo Grove, Illinois
Salary
Salary:
25.00 - 40.00 USD / Hour
nemera.net Logo
Nemera
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • 5+ years of experience in mold making, mold design, and/or mold processes strongly preferred
  • Ability to lift up to 35 lbs.
Job Responsibility
Job Responsibility
  • Support and maintain all policies of the company including but not limited to ISO Standards, Health and Safety Requirements, Continuous Improvement, as well as standard work procedures
  • Interact with engineering, production, and tooling staff when troubleshooting molds
  • Identify solutions to complex molding and mold problems as they pertain to injection molding manufacturing
  • Create work orders for service of all molds and maintain records as required
  • Coordinate the implementation of solutions for needed repairs
  • Verify molds are production ready
  • advise production and engineering of condition of molds
  • Train others on operation of equipment in the Tool Repair department
  • Other duties as assigned.
  • Fulltime
Read More
Arrow Right

Set Up Technician - Injection Molding

The APU Setter is responsible for the startup, operation and TPM maintenance of ...
Location
Location
United States , Buffalo Grove, Illinois
Salary
Salary:
24.00 - 38.00 USD / Hour
nemera.net Logo
Nemera
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent work experience (required)
  • Able to frequently lift up to 50lbs.
  • Stand and walk 90% of shift
  • Ability to bend, stoop, reach, push, pull, grab and climb
  • Satisfy vision testing requirements of the job
Job Responsibility
Job Responsibility
  • Supports and has knowledge of responsibilities of operator level 1 and 2
  • Complete visual inspection of product per production specification for defects
  • Maintain clean workspace and 55 Standards in work area daily/weekly/monthly
  • Load the validated master cycle parameters into the Injection Molding machine at each startup
  • Load programs into and align automated and robotic systems
  • Ensure Injection Molding machines are running to standard and ensuring product quality meets specification at each startup
  • Troubleshoot small and mid-size problems in processes, escalate to Setter Level 2 or Maintenance as needed
  • Answer alarms as needed, start and stop machines after initial start-up
  • Retrieve required documentation out of TMS to assist with quality related decisions
  • Perform line clearances as required
  • Fulltime
Read More
Arrow Right

Set-up Technician (Injection Molding)

Location
Location
United States , Greeneville
Salary
Salary:
Not provided
huf-group.com Logo
Huf Hülsbeck & Fürst GmbH & Co. KG
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Education/GED
  • Journeymen’s card preferred
  • 5 - 7 years previous experience in plastics in a set-up capacity
  • Previous experience with 10-500 ton capacity machines
Job Responsibility
Job Responsibility
  • Maintain the machines and associated equipment – including robotics
  • Conduct sampling of new molds and materials
  • Direct the daily duties of the personnel assigned to their area
  • Maintain records as required
  • Maintain equipment and ensure that work space is clean and orderly
  • Troubleshoot Robots and other automation machinery
  • Conduct studies on production, labor, equipment, and material costs
  • Practice a variety of molding processes
  • Use data collection (Plant Star, Kistler, Maximator) modules effectively
  • Train and perform the duties of Material Handlers and Operators as required
What we offer
What we offer
  • Full comprehensive health insurance, dental, vision, flexible spending account
  • Disability insurance
  • 401(k) with company match
  • Paid Time Off
Read More
Arrow Right

Injection Molding Technician

Do you have a passion for technology and enjoy working in an innovative environm...
Location
Location
Belgium , Tamise
Salary
Salary:
Not provided
https://www.randstad.com Logo
Randstad
Expiration Date
July 14, 2026
Flip Icon
Requirements
Requirements
  • A completed degree in electromechanics, mechanics, or plastics technology, or an equivalent level obtained through relevant work experience
  • Several years of experience in a similar technical role within a modern production environment
  • Thorough knowledge of injection moulding techniques, including setting up, converting, and fine-tuning machines
  • The ability to think analytically and quickly understand technical malfunctions to formulate appropriate solutions
  • A precise work attitude with a keen eye for detail and a passion for process improvement
  • Willingness to work in a rotating three-shift system to ensure continuity.
Job Responsibility
Job Responsibility
  • Closely monitoring technical malfunctions and alarms to keep production on track and minimize downtime
  • Independently starting up, correctly setting up, and converting injection moulding machines and moulds according to the production schedule
  • Monitoring the quality of produced parts through regular checks and measurements
  • Actively contributing to the optimization of the production process by suggesting technical improvements
  • Close collaboration with fellow technicians and production staff for smooth and efficient operations
  • Ensuring a safe, orderly, and clean working environment according to the applicable standards.
  • Fulltime
Read More
Arrow Right

Injection Molding Technician – 3rd Shift

We are currently seeking experienced Injection Molding Technicians who are inter...
Location
Location
United States , Buffalo
Salary
Salary:
48000.00 - 52000.00 USD / Year ▼
goodwinrecruiting.com Logo
Goodwin Recruiting
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3 years of experience operating injection molding machinery
  • Verify product quality from the onset of a production run by following the first piece inspection procedure on all new start-ups
  • Safe and efficient installation and removal of full molds and plates in the injection molding machinery
Job Responsibility
Job Responsibility
  • responsible for the quality of injection molding production
  • Verify product quality from the onset of a production run by following the first piece inspection procedure on all new start-ups
  • Safe and efficient installation and removal of full molds and plates in the injection molding machinery
What we offer
What we offer
  • $21 – $23 hr. + shift differential
  • Comprehensive Benefits package
  • PTO
  • 401K
  • Fulltime
Read More
Arrow Right