CrawlJobs Logo

Industrial Maintenance Mechanic III - HVAC

United States, Chandler Employment contract 26.00 - 30.00 USD / Hour · Job Posted May 04, 2026
Apply Position
Job Link Share

Job Description

Amentum is seeking an Industrial Maintenance Mechanic III - HVAC to join our Operations & Maintenance Team. This position is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing repairs to fixtures and systems in a manufacturing environment. Working under minimal supervision as a member of a self-directed work team, this is a multi-craft position that may perform machine repairs and general non-licensed maintenance work, as well as support other licensed trades as directed. Requires good working knowledge of all types and applications of equipment pertaining to maintenance and operations for assigned area, and the ability to work within machine tolerances. General maintenance, including minor duties in carpentry, painting, and sheet metal, may also be required. The Industrial Maintenance Mechanic III - HVAC must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required.

Job Responsibility

  • Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs
  • Performs trouble-shooting techniques on mechanical equipment such as pumps, agitators, hydraulic systems, research laboratory vacuum systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime
  • Performs preventative maintenance inspections
  • Develops and implements planned maintenance procedures, performs job estimates, maintains spare parts inventory
  • Assists in installing, inspecting new equipment and servicing installations
  • Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work
  • Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems
  • Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)
  • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
  • Recommends measures to improve maintenance methods and equipment performance
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions
  • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work
  • Maintains a strict schedule in order to be successful in the assignment, yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer
  • Other duties as assigned by Manager or Supervisor

Requirements

  • High school diploma or demonstrated equivalent
  • Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Must be willing to work overtime when required
  • May be required to work holidays and weekends
  • May require additional licensing per state regulations

What we offer

  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Industrial Maintenance Mechanic III - HVAC

8 matching positions

Maintenance Mechanic III

Life changing therapies. Global impact. Bridge to thousands of biopharma compani...
Location
Location
Canada , Mississauga
Salary
Salary:
32.23 - 40.63 CAD / Hour
pci.com Logo
PCI Pharma Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • MUST HAVE a License Industrial Mechanic Millwright (433A)
  • 6 to 10 years of working experience exclusively as a technician in a pharmaceutical packaging environment
  • Experienced Licensed Industrial or Construction and Maintenance Electrician (442A or 309A), with strong electrical and technical aptitude and/ or 6 to 10 years of working experience
  • None licensed candidates must complete and pass a technical aptitude test involving hands-on demonstration
  • General technical knowledge and experience concerning electrical, pneumatic, and HVAC
  • Analytical, problem solving and decision-making skills
  • Ability to multi-task and to meet tight deadlines
  • Self-motivated, able to work independently with minimal direction
  • Core skills in Mathematics and English usually associated with grade 12
  • Interpersonal skills to work co-operatively with Line Leaders, Packagers, and Project Coordinators/Managers
Job Responsibility
Job Responsibility
  • Responsible for the efficient set up and operation of various packaging and production pieces of equipment
  • Adjusts equipment to ensure production runs are executed efficiently, with high quality and minimal waste
  • Sets up packaging lines
  • Performs changeovers and supports tooling handling and cleaning
  • Responsible for the operation of the Line from a technical and production standpoint
  • Partners with QA, Packagers and Lead Leaders
  • Identifies and tackles continuous improvement opportunities
  • Uses sound technical knowledge to troubleshoot and repair packaging and production equipment
  • Performs and plans regular preventative maintenance on packaging and production equipment, including overhauls
  • Ensures cleaning protocols are followed for all packaging equipment
What we offer
What we offer
  • Paid time off
  • Extended health benefits (including dental and vision)
  • Life and disability insurance
  • Retirement savings options such as an RRSP with employer contributions
  • Additional wellness and employee-support programs may also be available
  • Fulltime
Read More
Arrow Right

Industrial Maintenance Electrician III

Amentum is seeking an Industrial Maintenance Electrical III to join our operatio...
Location
Location
United States , Chandler
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or demonstrated equivalent
  • Three years of experience as a maintenance electrician in an industrial environment, or demonstrated equivalent combination of education and experience
  • Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • May require additional licensing per state regulations
  • Ability to diagnose and troubleshoot all electrical equipment and systems including, but not limited to, motors, drives, low voltage controls, lighting, PLC’s, HVAC, Chiller, etc
  • Must demonstrate good written and verbal communication
  • Ability to identify and correct any safety-related issues and perform independent equipment evaluations
  • Math skills to include: Arithmetic, Application of formulas such as current, voltage, etc., Conversion of measurement units
  • Qualified applicants who are offered a position must pass a pre-employment substance abuse test
  • This position may require a valid Driver’s License
Job Responsibility
Job Responsibility
  • Diagnoses, troubleshoots, maintains, and repairs electrical equipment up to 480 volt 3 phase and facility systems such as RTU, doors, lighting, VFDs and motors circuits
  • Working knowledge of the National Electric Code (NEC)
  • Utilizes the building automation system to track building conditions and the operation of facilities equipment
  • Utilizes strong electrical and mechanical skills in order to complete assignments
  • Performs preventive maintenance on industrial electrical control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)
  • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
  • Recommends measures to improve maintenance methods and equipment performance
  • Analyzes and resolves work problems or assists workers in solving work problems
  • Understands company policies and enforces safety regulations
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Fulltime
Read More
Arrow Right

Maintenance Trades Specialist III - HVAC Tech

Position: Maintenance Trades Specialist III - HVAC Tech. Location: Atrium Health...
Location
Location
United States , Charlotte
Salary
Salary:
30.70 - 46.05 USD / Hour
advocatehealth.com Logo
Advocate Health Care
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid Driver’s License
  • Trade/Tech School Trades Certificate or trades or industry recognized certification/license requiring Continuing Education Units or periodic renewal to maintain
  • Advanced training beyond High School that includes the completion of technical training
  • 4 or more Years of Experience in relatable industrial/trades maintenance or operations
  • Ability to work with minimal oversight with advanced technical skills in facility maintenance
  • Clear written and verbal communication skills required
  • Advanced computer skills/competency required in using and operating systems such as Microsoft Office Platform, Building Automation Systems, Pneumatic Tube Systems
  • Clear understanding of applicable compliance codes and guidelines
  • Works required shifts and participates in on-call duty to provide 24/7 coverage
  • Must be able to sit, stand, walk, lift, squat, bend, crawl, reach above shoulders, and twist frequently throughout the workday
Job Responsibility
Job Responsibility
  • Performs preventive maintenance and technical repairs on complex facility systems
  • Diagnoses and implements repairs for Utility and Infrastructure Systems
  • Installs/replace and maintains building, Mechanical, Electrical, Plumbing and controls systems
  • Operates and monitors advanced utility equipment (generators, plant chillers, steam boilers, fire protection systems, etc.) and utilizes building automation systems to troubleshoot issues
  • Maintains vacuum, compressed air, and medical gas systems
  • Reads blueprints, Life Safety drawings and manuals for accurate task completion
What we offer
What we offer
  • Paid Time Off programs
  • Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
  • Flexible Spending Accounts for eligible health care and dependent care expenses
  • Family benefits such as adoption assistance and paid parental leave
  • Defined contribution retirement plans with employer match and other financial wellness programs
  • Educational Assistance Program
  • Opportunity for annual increases based on performance
  • Premium pay such as shift, on call, and more based on a teammate's job
  • Incentive pay for select positions
  • Fulltime
Read More
Arrow Right

General Maintenance Technician III - Roofer

Amentum is seeking a General Maintenance Technician III – Roofer to join our ope...
Location
Location
United States , Chandler
Salary
Salary:
25.00 - 27.00 USD / Hour
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or demonstrated equivalent
  • Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Ability to handle extreme weather conditions
  • Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed
  • Must be willing to work overtime when required
  • May be required to work holidays and weekends
Job Responsibility
Job Responsibility
  • Placement, removal and repair of various roofing materials such as asphalt, wood and plastics
  • Use a variety of hand and power tools
  • Roofers must be able to work long hours of physical labor, should work well with their hands and should have the ability to bend and climb
  • Reading blueprints and diagrams is necessary to ensure that you can follow instructions on the job
  • Lay new roofing materials such as asphalt, wood, steel and plastics
  • Inspect roofing for damage and perform any needed repairs
  • Spray treatment chemicals on roofs and buildings to seal them from water and weather
  • Clean rooftops by removing leaves, ice and other debris
  • Install insulation materials underneath roofs
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

General Maintenance Technician III

Amentum is seeking a General Maintenance Technician III to join our Operations &...
Location
Location
United States , Portland
Salary
Salary:
35.00 - 38.00 USD / Hour
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or demonstrated equivalent
  • Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Must be a US Citizen
Job Responsibility
Job Responsibility
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Operates, maintains, and repairs all facility and production associated equipment in compliance with all company regulations and standards
  • Analyzes equipment failures, inspects, replaces, alters, and maintains in good repair all building and production services and related equipment
  • Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs
  • Performs trouble-shooting techniques on mechanical equipment such as HVAC, pumps, agitators, hydraulic systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime
  • Performs preventative maintenance inspections
  • Develops and implements planned maintenance procedures, performs job estimates, maintains spare parts inventory
  • Assists in installing, inspecting new equipment and servicing installations
  • Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work
  • Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

General Maintenance Technician III – Roofer

This position is responsible for providing an intermediate level of expertise in...
Location
Location
United States , Chandler
Salary
Salary:
25.00 - 27.00 USD / Hour
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or demonstrated equivalent
  • Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Ability to handle extreme weather conditions
  • Ability to read and understand information contained in a variety of documents or displayed on a computer screen
  • Ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents
  • Demonstrated fluency in computer use including the full Microsoft product line
  • Must be willing to work overtime when required
  • May be required to work holidays and weekends
  • Work schedule can change based on business needs
Job Responsibility
Job Responsibility
  • Placement, removal and repair of various roofing materials such as asphalt, wood and plastics
  • Use a variety of hand and power tools
  • Reading blueprints and diagrams is necessary to ensure that you can follow instructions on the job
  • Lay new roofing materials such as asphalt, wood, steel and plastics
  • Inspect roofing for damage and perform any needed repairs
  • Spray treatment chemicals on roofs and buildings to seal them from water and weather
  • Clean rooftops by removing leaves, ice and other debris
  • Install insulation materials underneath roofs
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Operates, maintains, and repairs all facility and production associated equipment in compliance with all company regulations and standards
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

Hvac technician iii

Amentum is seeking a mid-level industrial HVAC/R Technician III to join our faci...
Location
Location
United States , Waukesha
Salary
Salary:
25.00 - 33.00 USD / Hour
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Three years of experience performing mechanical maintenance in an industrial environment or demonstrated equivalent combination of education and experience
  • Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
  • Requires the ability to work safely with 3-phase power up to and including 480V
  • Must be able to troubleshoot and diagnose electrical circuits ranging from 24VAC/DC and up including lighting and load centers
  • EPA Universal Certification
  • Qualified applicants who are offered a position must pass a pre-employment substance abuse test
  • This position does not include sponsorship for United States work authorization
  • This position will require the ability to obtain a security access badge at our client’s location
  • Requires the ability to regularly lift up to 50 lbs
  • Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift
Job Responsibility
Job Responsibility
  • Performs preventative and corrective maintenance to a wide variety of facility related equipment
  • Diagnoses, troubleshoots, maintains, and repairs heating and ventilation equipment, pumps, fans, chillers, dryers, compressors, rooftop AHU’s, split systems, compressors, refrigeration, and other mechanical equipment as necessary in an industrial environment
  • Provides instruction and assistance to other technicians as needed
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Utilizes the building automation system to track building conditions and the operation of facilities equipment
  • Utilizes strong mechanical and electrical skills in order to complete assignments
  • Performs preventive maintenance on HVAC control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)
  • Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
  • Recommends measures to improve maintenance methods and equipment performance
  • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

Maintenance Technician III

Maintenance Technician III is responsible for maintenance of all production and ...
Location
Location
United States , Charlotte
Salary
Salary:
35.00 - 38.00 USD / Hour
tranetechnologies.com Logo
Trane Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Strong communication skills and excellent electrical and mechanical aptitude
  • Ability to learn quickly, troubleshoot effectively, and innovate when needed
  • Professional demeanor when interacting with internal and external partners
  • Strong knowledge of industrial electrical equipment and applicable codes
  • NC electrical contractor license preferred
  • Broad technical knowledge in electrical wiring, power systems, mechanical systems, hydraulics, pneumatics, and HVAC
  • Experience with electronics and PLCs is required
  • Machining experience preferred
  • Strong analytical and problem‑solving capabilities
  • Ability to diagnose and resolve issues across production equipment, facility systems, and HVAC
Job Responsibility
Job Responsibility
  • Perform preventive maintenance on production and facility equipment
  • Troubleshoot and repair production and facility systems
  • Research, identify, and source replacement parts and equipment
  • Support planning and installation of new equipment and facility upgrades
  • Communicate with contractors, equipment manufacturers, and suppliers for equipment operation, service, and repairs
  • Attend mandatory safety training and follow all safety rules and procedures
  • Participate actively in all site safety programs
  • Maintain accurate service records and maintenance documentation
What we offer
What we offer
  • Benefits kick in on DAY ONE for you and your family, including health insurance, and holistic wellness programs that include generous incentives
  • Family building benefits include fertility coverage and adoption/surrogacy assistance
  • 401K match up to 6%, plus an additional 2% core contribution = up to 8% company contribution
  • Paid Time off including support of volunteer and parental leave needs
  • Educational and training opportunities through company programs along with tuition assistance and student debt support
  • Fulltime
Read More
Arrow Right