Incoming Mechanical Inspector Job at MillenniumSoft Inc (Baltimore)

Quality Inspector - Electromechanical

We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to jo...

Location

United States , Spokane, WA; Tacoma, WA

Salary:

32.00 - 36.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise
Proficiency in dimensional inspection of precision tolerance parts
Strong knowledge and hands-on experience with all inspection tools
Ability to understand and interpret complex GD&T requirements and validate complex assemblies
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.)
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Job Responsibility

Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements
Perform incoming inspections from external providers of products and services (e.g., nickel plating)
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run)
Compile final inspection sign-off sheets and inspection packages
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent
Review and validate the justification for parts not inspected at final inspection
Audit and validate the execution of inspection plans as applicable
Document non-conformances using approved methods and submit non-conformance reports for customer disposition
Verify hardware cleanliness and absence of internal or external foreign object debris
Verify fasteners are properly installed

What we offer

Mileage Compensation ($0.70 per mile driven)

Parttime

New

Receiving Quality Inspector

The Receiving Quality Inspector is responsible for ensuring incoming, in-process...

Location

United States , Greenville

Salary:

Not provided

Synapse - Manufacturing

Expiration Date

Until further notice

Requirements

Able to read and understand mechanical drawings, material lists and inspection standards
Ability to learn and correctly apply new skills
Flexible
able to adapt easily to shifting priorities and adjust to change in a fast-paced manufacturing work environment.
Able to work independently with minimal supervision.
Highly organized with meticulous attention to detail and follow-through
Excellent interpersonal, verbal, and written communication skills
Must have professional courage, high integrity, and strong work ethic
Effectively communicates and understand instructions both verbally and written in the English language and able to train others
Reliable, dependable, and able to work overtime when required

Job Responsibility

Perform product inspections from first article, in-process, final inspection, receipt, and as required in a timely manner.
Work from blueprints, drawings, process sheets, engineering change orders and written and verbal instruction to inspect raw materials.
Document inspection results by completing reports and logs.
Ensure all customer drawing requirements are met.
Inspect parts during entire manufacturing process, including incoming parts returning from outsourced processes.
Coordinate with purchasing to ensure all proper purchase documents are in ERP system for receiving.
Work in ERP system to review and receive orders.
Provide proper receiving documentation to accounting for weekly pay runs.
Be able to lift boxes up to 70lbs.
If there are issues with the order after receiving inspection, report problem or concerns to manager and appropriate leadership of operations department and complete rejection process.

Fulltime

Inspector

To carry out detailed mechanical inspection of aircraft components, parts and as...

Location

United Kingdom , Manchester

Salary:

45000.00 GBP / Year

Chevron Recruitment Agency

Expiration Date

Until further notice

Requirements

Apprenticeship or NVQ Level 3 or equivalent in mechanical or aerospace engineering
Inspection related training desirable
Experience within an EASA Part 145 or Part 21 environment is an advantage

Job Responsibility

Perform incoming, in work and final inspection (including release to service) of aircraft components, parts and assemblies
Interpret engineering drawings, approved repair data, work instructions and customer specifications
Verify dimensions, tolerances, fit and condition using appropriate calibrated tools and equipment
Carry out detailed visual inspection for wear, corrosion, damage, cracking indicators, deformation and other defects
Confirm material, process and traceability documentation aligns to job requirements
Complete inspection records, job cards, certificates and release packs clearly and accurately
Raise non-conformance reports and support investigation, containment and corrective actions
Work closely with production, planning, engineering and supply chain to resolve quality or technical issues quickly
Support internal and external audits by providing objective evidence and maintaining tidy, compliant records
Ensure compliance with health and safety, human factors awareness and standard workshop controls

Fulltime

Material (Tube) Inspector

Location

India , Mehsana, Gujarat

Salary:

Not provided

Alleima Precision Tube

Expiration Date

January 30, 2026

Requirements

Operating skill of Inspection/PMI and Mark/packed
Creativity, Flexibility and Teamwork
Basic knowledge of 5S, TPM & KAIZEN
1 to 5 year experience
Diploma / Degree in Mechanical engineering

Job Responsibility

To maintain discipline as per rules & regulation of the Organization
Achievement of set Production Targets
Communication of operational status and deviations if any to shift engineer
Drive Continuous Improvements and development on a personal and operational level
Address and follow TPM requirements and Maintain highest level of 5S in your work area
Material handling as per procedure
Lean maintain in department as SMT BS 2.0 requirements
Whenever require, you have to work at other station in the organization
To follow instruction of your superiors
To carry out production and stoppage entry in the PPC system

Airframe and Powerplant Technician

Airframe and Powerplant Technician, Unscheduled Maintenance role at Bombardier's...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Minimum of 8 years of aircraft maintenance work experience, or substantiated equivalent experience
Minimum of 5 years of experience on corporate jet aircraft
Minimum of 3 years of Bombardier aircraft model experience
Experience with aircraft return to service and inspection procedure
Ability to become a Delegated Inspector
Ability to train other employees
Ability to become Engine Run & Taxi qualified on Bombardier Aircraft
Ability to become APU Run qualified on Bombardier Aircraft

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work completed per appropriate manuals and regulations as required
Inspect incoming parts and documentation to meet regulatory requirements
Assist in other maintenance disciplines – Avionics, Structures, Composites etc.
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Provide time estimates
Perform other duties as assigned

What we offer

Insurance plans
Dental, medical, life insurance, disability, and more
Competitive base salary
Retirement savings plan
Employee Assistance Program
Sign-on bonus (terms and conditions apply)

Fulltime

Airframe and Powerplant Technician, Unscheduled Maintenance

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Minimum of 8 years of aircraft maintenance work experience, or substantiated equivalent experience
Minimum of 5 years of experience on corporate jet aircraft
Minimum of 3 years of Bombardier aircraft model experience
Experience with aircraft return to service and inspection procedure
Ability to become a Delegated Inspector
Ability to train other employees
Ability to become Engine Run & Taxi qualified on Bombardier Aircraft
Ability to become APU Run qualified on Bombardier Aircraft

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work completed per appropriate manuals and regulations as required
Inspect incoming parts and documentation to meet regulatory requirements
Assist in other maintenance disciplines – Avionics, Structures, Composites etc.
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
Provide time estimates
Perform other duties as assigned

What we offer

Insurance plans
Dental, medical, life insurance, disability, and more
Competitive base salary
Retirement savings plan
Employee Assistance Program
Sign-on bonus (terms and conditions apply)

Fulltime

Quality Inspector

Location

Philippines , Lapu-Lapu City

Salary:

Not provided

Teradyne

Expiration Date

Until further notice

Requirements

Vocational Diploma in Electronics or equivalent
BS Industrial Technology major in Electronics or equivalent, or any related course
Must have good manual dexterity in order to perform mechanical assembly and wire harnessing
Proficient in computer operation, MS Office (Excel, Power Point, Word, Visio, etc), and familiarity with internet based program navigation, with ability to generate and interpret computer data
Must be able to speak, read and write in English
Willing to work in an 8 hour shifts

Job Responsibility

Reading Work Instructions and specifications to ensure that operations meet production standards for incoming, in-process and out going materials and products
Thorough inspections of incoming materials, in-process production, and finished products to ensure compliance with established quality standards and specifications
Use various tools and techniques, including precision measurement instruments (e.g., calipers, micrometers), to assess product dimensions, tolerances, and surface finishes
Recommending any necessary adjustments and changes to production processes
Identify and document any defects, non-conformities, or deviations from quality standards
Removing products that don’t meet production standards and recommending strategies to improve product quality
Accepting or rejecting finished products/assemblies and discussing inspection results with the production team
Prepare detailed reports on inspection results, including non-conformance issues, corrective actions taken, and quality metrics

Quality Inspector - Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

February 09, 2026

Requirements

5 years experience as a Quality Inspector in an aerospace, military or equivalent high reliability field
Experience with measuring instruments (scales, micrometers, calipers, digital multimeters, etc.)
Advanced knowledge of AS9100 quality standards
Advanced knowledge of product manufacturing, assembly, test and inspection processes
Working knowledge of process auditing techniques to ensure compliance to defined quality requirements
Experience in performing inspections of aerospace components, ensuring compliance with engineering specifications, quality standards, and industry regulations
Participated in TRS (test readiness scrum) component environmental test meetings
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Ability to lift up to 25 lbs
Excellent communication and interpersonal skills with the ability to articulate aerospace hardware and systems problems to technical professionals to initiate resolutions

Job Responsibility

Initiating corrective actions with our Manufacturing, ATLO, and Engineering teams
Maintain systems that will assure the quality and traceability of the incoming materials and final products
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost and other areas involved in the control of product quality
Monitor all manufacturing processes through audits and daily evaluations, to ensure that assembly & test operations being performed in accordance with approved specifications and standards
Documenting discrepancies as they occur during manufacturing & test operations
Independently perform verifications and document results in a clear, precise, and complete manner
Travel required to support operations identified by program being supported
Support in other inspection areas defined by Millennium Space Systems Leadership as business needs require
Develop, implement, and audit inspection and test plans, acceptance criteria, and in-process work instructions
Facilitate root cause analysis and resolution with manufacturing / production area DR’s

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Incoming Mechanical Inspector

MillenniumSoft Inc

Location:
United States , Baltimore

Category:
Quality Control

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Incoming Mechanical Inspector

Quality Inspector - Electromechanical

Receiving Quality Inspector

Inspector

Material (Tube) Inspector

Airframe and Powerplant Technician

Airframe and Powerplant Technician, Unscheduled Maintenance

Quality Inspector

Quality Inspector - Senior

Incoming Mechanical Inspector

MillenniumSoft Inc

Location:United States , Baltimore

Category:Quality Control

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Incoming Mechanical Inspector

Quality Inspector - Electromechanical

Receiving Quality Inspector

Inspector

Material (Tube) Inspector

Airframe and Powerplant Technician

Airframe and Powerplant Technician, Unscheduled Maintenance

Quality Inspector

Quality Inspector - Senior

Location:
United States , Baltimore

Category:
Quality Control

Contract Type:
Employment contract

Job Posted:
January 11, 2026