CrawlJobs Logo

Imager Electronics Engineer

United Kingdom, Guildford · Job Posted May 28, 2026
Apply Position
Job Link Share

Job Description

Join Our Team as an Electronics Engineer – Optical Payload Group (Job Ref: 2124) Are you ready to take your career to new heights? Join the Imager Electronics team at SSTL and work on exciting space missions from LEO to GEO and beyond. As an engineer at SSTL, you'll be involved in every stage of a mission, from concept to AIT, launch, commissioning, and operational life. This is a true cradle-to-grave experience that will give you the chance to see your work in space in a rapid timescale! As part of the Optical Payloads group, you'll collaborate closely with other members of the Optical Department and the core satellite mission team, interacting with technical leads across multiple disciplines to create innovative solutions.

Job Responsibility

  • Lead verification, testing, and debugging of imager electronics for SSTL Optical Payloads
  • Develop and execute test plans for digital, analogue, and mixed‑signal electronics
  • Perform detailed circuit‑level debugging using lab equipment and diagnostic tools
  • Conduct board‑level validation, characterisation, and performance assessment
  • Support design teams by reviewing schematics and layouts, ensuring testability and robustness
  • Carry out circuit simulations and analysis to support verification activities
  • Prepare electronics for manufacture and acceptance testing, ensuring compliance with space‑environment requirements
  • Design and maintain Electronics Ground Support Equipment with a focus on test automation and repeatability
  • Produce high‑quality technical documents, including test procedures, validation reports, and test results
  • Maintain technical solutions, budgets, and schedules relating to verification and test activities
  • Interface at system and subsystem level to ensure appropriate test coverage and traceability throughout the project lifecycle
  • Work closely within a core project team to support integration, AIT, and commissioning phases

Requirements

  • 2–3 years of experience in electronics verification, testing, and debugging (or electronics design with strong test focus)
  • Experience in mixed‑signal circuit testing and validation
  • Strong proficiency with lab test equipment (oscilloscopes, logic analysers, signal generators, etc.)
  • Familiarity with Mentor tools is a plus
  • Knowledge of scripting languages such as Python or TCL for test automation
  • Understanding of FPGA design and verification in VHDL
  • Strong fault‑finding skills and an analytical approach to diagnosing complex issues
  • A degree or equivalent in Electronics Engineering
  • Excellent interpersonal and communication skills
  • Ability to influence, persuade, and negotiate at all levels
  • Highly organized, self-motivated, and proactive
  • Strong team player with the ability to interface with others at all levels
  • Good presentation and customer-facing skills
  • Results-oriented with a strong drive to deliver
  • Flexible and adaptable to changing priorities
  • Excellent planning and organizing skills
  • Ability to work on multiple projects simultaneously
  • Able to work autonomously and take initiative
  • Strong decision-making and creative problem-solving skills
  • Proven ability to deliver solutions under pressure and tight timescales
  • Proficiency in MS Office (Excel, Word, PowerPoint, and Microsoft Project)
  • Demonstrates company mindsets and behaviours: Be accountable, Drive & deliver, communicate effectively, Self-manage effectively, Work as one team

Nice to have

Familiarity with Mentor tools

What we offer

  • 32 days Holiday plus Bank Holidays
  • Pension Scheme with Life Assurance
  • Private Medical & International Travel Insurance
  • Annual Bonus Scheme
  • Share Incentive Plan
  • Enhanced Maternity, Paternity & Shared Parental Pay for new parents
  • High Street Discount Scheme and many more

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Imager Electronics Engineer

8 matching positions

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Enterprise leader - clinical engineering imaging support

This job description indicates the general nature and level of work expected of ...
Location
Location
United States , Oak Brook; Charlotte
Salary
Salary:
68.20 - 102.30 USD / Hour
advocatehealth.com Logo
Advocate Health Care
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in Electronics, Computer Science, Biomedical Engineering, Medical Imaging or related field
  • Requires 10 years of experience in Clinical Engineering (including support of fixed and portable imaging) or equivalent technical discipline
  • 3 years of supervisory experience in related areas
  • Self-directed and independent decision-making capabilities
  • Oral & written communication skills, organizational abilities, priority management, and statistical analysis abilities
  • Effective use of power point, excel and other business software
  • Demonstrates accuracy, thoroughness, and orderliness in performing job duties
  • Ability to work independently and as part of a team
  • Experienced in leading and facilitating group and team meetings & projects
  • Public speaking experience including providing educational programs & presentations on Risk Management & Professional Liability issues including professional organization programs
Job Responsibility
Job Responsibility
  • Implements and monitors the organization’s medical equipment management plan for assigned scope to ensure patient/staff safety and regulatory compliance
  • Provides recommendations on service delivery options, vendor selection, and in-sourcing strategies based on financial and operational analyses
  • Monitors expenditures and recommends corrective actions for budget variances, ensuring purchasing activities comply with company policies and practices
  • Integrates medical imaging equipment maintenance for new facilities, mergers, and affiliated practices, ensuring assessment of existing programs, review of service agreements, and audit of inventory records
  • Reports imaging equipment reliability and performance data with clinical customers, site leadership and/or area leadership through the membership or ad hoc participation of respective committees
  • Oversees program compliance for both quality and regulatory standards and guidelines
  • Optimizes Clinical Engineering Imaging repair and maintenance support including selection of service vendors, system service contracts, best practices, and policy and procedure development
  • Reviews equipment performance and service vendors to maintain the highest standards of patient care and safety
  • Responsible for expediting solutions, including but not limited to, replacing equipment or terminating service agreements
  • In collaboration with Clinical Engineering leaders, Service Line Leaders, and Supply Chain, supports development and maintenance of a multi-year area and/or enterprise imaging equipment plan
What we offer
What we offer
  • Paid Time Off programs
  • Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
  • Flexible Spending Accounts for eligible health care and dependent care expenses
  • Family benefits such as adoption assistance and paid parental leave
  • Defined contribution retirement plans with employer match and other financial wellness programs
  • Educational Assistance Program
  • Fulltime
Read More
Arrow Right

Enterprise leader - clinical engineering imaging support

Enterprise Leader - Clinical Engineering Imaging Support responsible for impleme...
Location
Location
United States , Oak Brook; Charlotte
Salary
Salary:
68.20 - 102.30 USD / Hour
advocatehealth.com Logo
Advocate Health Care
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in Electronics, Computer Science, Biomedical Engineering, Medical Imaging or related field
  • Requires 10 years of experience in Clinical Engineering (including support of fixed and portable imaging) or equivalent technical discipline
  • 3 years of supervisory experience in related areas
  • Self-directed and independent decision-making capabilities
  • Oral & written communication skills, organizational abilities, priority management, and statistical analysis abilities
  • Effective use of power point, excel and other business software
  • Demonstrates accuracy, thoroughness, and orderliness in performing job duties
  • Ability to work independently and as part of a team
  • Experienced in leading and facilitating group and team meetings & projects
  • Public speaking experience including providing educational programs & presentations on Risk Management & Professional Liability issues including professional organization programs
Job Responsibility
Job Responsibility
  • Implements and monitors the organization’s medical equipment management plan for assigned scope to ensure patient/staff safety and regulatory compliance
  • Provides recommendations on service delivery options, vendor selection, and in-sourcing strategies based on financial and operational analyses
  • Monitors expenditures and recommends corrective actions for budget variances, ensuring purchasing activities comply with company policies and practices
  • Integrates medical imaging equipment maintenance for new facilities, mergers, and affiliated practices, ensuring assessment of existing programs, review of service agreements, and audit of inventory records
  • Reports imaging equipment reliability and performance data with clinical customers, site leadership and/or area leadership through the membership or ad hoc participation of respective committees
  • Oversees program compliance for both quality and regulatory standards and guidelines
  • Optimizes Clinical Engineering Imaging repair and maintenance support including selection of service vendors, system service contracts, best practices, and policy and procedure development
  • Reviews equipment performance and service vendors to maintain the highest standards of patient care and safety
  • Responsible for expediting solutions, including but not limited to, replacing equipment or terminating service agreements
  • In collaboration with Clinical Engineering leaders, Service Line Leaders, and Supply Chain, supports development and maintenance of a multi-year area and/or enterprise imaging equipment plan
What we offer
What we offer
  • Paid Time Off programs
  • Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
  • Flexible Spending Accounts for eligible health care and dependent care expenses
  • Family benefits such as adoption assistance and paid parental leave
  • Defined contribution retirement plans with employer match and other financial wellness programs
  • Educational Assistance Program
  • Opportunity for annual increases based on performance
  • Fulltime
Read More
Arrow Right

Enterprise Leader - Clinical Engineering Imaging Support

This job description indicates the general nature and level of work expected of ...
Location
Location
United States , Oak Brook; Charlotte
Salary
Salary:
68.20 - 102.30 USD / Hour
advocatehealth.com Logo
Advocate Health Care
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in Electronics, Computer Science, Biomedical Engineering, Medical Imaging or related field
  • Requires 10 years of experience in Clinical Engineering (including support of fixed and portable imaging) or equivalent technical discipline
  • 3 years of supervisory experience in related areas
  • Self-directed and independent decision-making capabilities
  • Oral & written communication skills, organizational abilities, priority management, and statistical analysis abilities
  • Effective use of power point, excel and other business software
  • Demonstrates accuracy, thoroughness, and orderliness in performing job duties
  • Ability to work independently and as part of a team
  • Experienced in leading and facilitating group and team meetings & projects
  • Public speaking experience including providing educational programs & presentations on Risk Management & Professional Liability issues including professional organization programs
Job Responsibility
Job Responsibility
  • Implements and monitors the organization’s medical equipment management plan for assigned scope to ensure patient/staff safety and regulatory compliance
  • Provides recommendations on service delivery options, vendor selection, and in-sourcing strategies based on financial and operational analyses
  • Monitors expenditures and recommends corrective actions for budget variances, ensuring purchasing activities comply with company policies and practices
  • Integrates medical imaging equipment maintenance for new facilities, mergers, and affiliated practices, ensuring assessment of existing programs, review of service agreements, and audit of inventory records
  • Reports imaging equipment reliability and performance data with clinical customers, site leadership and/or area leadership through the membership or ad hoc participation of respective committees
  • Oversees program compliance for both quality and regulatory standards and guidelines
  • Optimizes Clinical Engineering Imaging repair and maintenance support including selection of service vendors, system service contracts, best practices, and policy and procedure development
  • Reviews equipment performance and service vendors to maintain the highest standards of patient care and safety
  • Responsible for expediting solutions, including but not limited to, replacing equipment or terminating service agreements
  • Supports development and maintenance of a multi-year area and/or enterprise imaging equipment plan which identifies and prioritizes systems requiring replacement, renovation, refurbishment, replacement or re-deployment
What we offer
What we offer
  • Paid Time Off programs
  • Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
  • Flexible Spending Accounts for eligible health care and dependent care expenses
  • Family benefits such as adoption assistance and paid parental leave
  • Defined contribution retirement plans with employer match and other financial wellness programs
  • Educational Assistance Program
  • Fulltime
Read More
Arrow Right

Senior Software Engineer-GitHub

As a Senior Software Engineer on the GitHub Enterprise Server (GHES) Release tea...
Location
Location
India , Hyderabad
Salary
Salary:
Not provided
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 6+ years experience in Software Engineering, Computer Science, or related technical discipline with proven experience maintaining and delivering production software coding in languages including, but not limited to, C, C++, C#, Java, JavaScript, Go, Ruby, Rust, or Python
  • Experience building and operating production CI/CD or release pipelines for complex distributed systems
  • Experience with Linux-based systems, containers, and software packaging or artifact delivery
  • Experience troubleshooting build, test, and release failures across multiple layers of the stack
  • Proven ability to improve engineering systems through automation, observability, and process simplification
  • OR Associate’s Degree in Computer Science, Electrical Engineering, Electronics Engineering, Math, Physics, Computer Engineering, Computer Science, or related field AND 5+ years experience in Software Engineering, Computer Science, or related technical discipline with proven experience maintaining and delivering production software coding in languages including, but not limited to, C, C++, C#, Java, JavaScript, Go, Ruby, Rust, or Python
  • OR Bachelor's Degree in Computer Science, Electrical Engineering, Electronics Engineering, Math, Physics, Computer Engineering, Computer Science, or related field AND 4+ years experience in Software Engineering, Computer Science, or related technical discipline with proven experience maintaining and delivering production software coding in languages including, but not limited to, C, C++, C#, Java, JavaScript, Go, Ruby, Rust, or Python
  • OR Master's Degree in Computer Science, Electrical Engineering, Electronics Engineering, Math, Physics, Computer Engineering, Computer Science, or related field AND 2+ years experience in Software Engineering, Computer Science, or related technical discipline with proven experience maintaining and delivering production software coding in languages including, but not limited to, C, C++, C#, Java, JavaScript, Go, Ruby, Rust, or Python
  • OR Doctorate in Computer Science, Electrical Engineering, Electronics Engineering, Math, Physics, Computer Engineering, Computer Science, or related field
  • OR equivalent experience
Job Responsibility
Job Responsibility
  • Own and improve the systems that build GHES operating system images, containers, and appliance artifacts across platform, infrastructure, and application layers
  • Design, maintain, and evolve the release pipelines that generate, validate, and certify packages for GHES customer delivery
  • Build and operate integration test environments for GHES, ensuring they are reliable, representative, and scalable for continuous validation
  • Drive CI quality by improving test execution, signal reliability, issue detection, triage, and partnership with feature teams to resolve failures
  • Enable publication and distribution of GHES artifacts to Azure, AWS, and GCP for customer consumption
  • Partner with engineers across platform, infra, release, and product teams to improve release readiness, debugging, and root-cause analysis
  • Improve the safety, repeatability, observability, and compliance of release and certification workflows
  • Lead technical investments that reduce release friction, improve engineering velocity, and increase confidence in shipped builds
  • Contribute across the end-to-end GHES release lifecycle, from build and package generation through validation, certification, and customer delivery
  • Provide operational support for release infrastructure and lead investigation and resolution of critical issues impacting build, test, certification, or package delivery
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Senior Image Processing Engineer

We are looking for a seasoned Image Processing Engineer experienced in developme...
Location
Location
Poland , Warsaw
Salary
Salary:
Not provided
iceye.com Logo
ICEYE
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Familiarity with the electro-optical payload construction with the focus on the light capture mechanisms and sensor data read-out system
  • Understanding of end-to-end image processing chain, from sensor electronics and image ancillary data to geometric characterization
  • At least 5 years of experience in hands-on development of the aerial or spaceborne optical imagery processing pipelines and/or computer vision systems
  • Strong expertise in photogrammetry, data processing and algorithm development
  • Experience in prototyping software solutions for edge imaging data processing working hand-in-hand with the hardware and embedded systems teams on coupling light capture system and fundamental image signal processing with the image formation back-end
  • Familiarity with AI-based solutions for image processing and quality enhancement, specifically for the super-resolution processing field
  • Deep understanding of Remote Sensing and EO data collection and processing techniques. Familiarity with image analysis and geointelligence data handling
  • Proficiency in Python with the knowledge of GDAL and geospatial Python libraries
  • Proactive attitude, willingness to work with the team, share knowledge and actively participate in creating solutions for imaging instruments from the ground up
Job Responsibility
Job Responsibility
  • Develop and implement advanced algorithms and pipelines for image processing, including image formation, denoising, mosaicing, georeferencing, orthorectification and image correction
  • Architecture the image formation system, starting from raw sensor data, edge pre-processing up to quality enhancement and product standardization
  • Define image quality metrics, lead image calibration, work together with the satellite, optical system and sensor engineering colleagues on commissioning, calibration and imaging product exploitation
  • Build and maintain the infrastructure and tools for high-volume image processing throughout their operational lifecycle
  • Collaborate cross-functionally on the sensor read-out design, system integration, performance modeling, and product definition
  • Provide technical expertise in the multidomain engineering and product team working on very high resolution system development
What we offer
What we offer
  • A yearly benefit budget to spend as you wish (MyBenefit i.e. on sport, transport, wellness, lunch, tourism, etc.)
  • Relocation support (i.e. flight tickets, accommodation, relocation agency support etc.)
  • Time for self-development, research, training, conferences, or certification schemes
  • Polish language lessons
  • Occupational and private healthcare and life insurance
  • Inspiring and collaborating offices and silent workspaces enable you to focus
  • A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission
  • Fulltime
Read More
Arrow Right

Field Service Site Manager

This is a management position in charge of the CS Team. The primary responsibili...
Location
Location
South Korea , Icheon
Salary
Salary:
Not provided
asml.com Logo
ASML
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 15+ years of experience (technical support/field service) in Semi / High-tech industry (multinational company is preferred)
  • Experience in semiconductor photolithography / semiconductor fab environment is highly desired including experience in DUV optical imaging systems support in a clean room environment or equivalent experience in diagnosing and troubleshooting and/or customer service on electronic systems
  • Experience in service operations management with experience managing service engineers and executing customer service operations
  • Experience in electronics, software, mechanical engineering, optics and an ability to understand problems of scope where analysis of situations or data requires a review of identifiable factors
  • Understand operations process pertaining to semiconductor equipment installation and support, i.e, stepping and or scanning “Photo Lithography Imaging” systems, DUV metrology systems, DUV excimer lasers or specific DUV Beam Delivery Systems
  • System performance related data analysis, system troubleshooting and applied technical problem solving skills required
  • 5+ years of people managing experience, managing technical customer support teams
  • Experience of overseeing multiple group/team leaders in a local CS organization, leading and developing people and teams
  • Capable to manage customers/stakeholders and high pressured situations
  • Bachelor’s degree in engineering related field is required and Master’s Degree is preferred
Job Responsibility
Job Responsibility
  • Provides appropriate service engineering resources required for equipment installation, maintenance, upgrade, & repairs of equipment at customer sites
  • Obtains service engineering resources based on customer requirements for comprehensive system support, including systems in escalation and under installation
  • Manages personnel schedules to ensure adequate resource for customer satisfaction: PTO, Training, Factory support labor and new system or upgrades
  • Executes inventory management control and forecasting in coordination with regional and corporate logistics
  • Ensures availability and safe operation of tools or equipment for installation and maintenance of systems at customer sites
  • Engages and maintains customer relationships including proactive interface with customer mgmt to identify potential areas of improvement and drive resolution
  • Reviews long term service strategies with the Customer and confirm plans
  • Ensures and maintains cross-functional interface with Account Management, Logistics, Technical Support and other regional and corporate functions as required
  • Reviews information about Cymer with FSE’s, e.g., Business status, new products, etc
  • Establishes and monitors FSE training plans, FSE certification tracking and training strategies in conjunction with corporate training department
  • Fulltime
Read More
Arrow Right