Hv Commissioning Engineer Job at 360 Resourcing Solutions (Middlesbrough)

Hv Commissioning Engineer

You will work as part of a highly skilled Engineering Division supporting all as...

Location

United Kingdom , Wakefield

Salary:

Not provided

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

BTEC Level 3 Electrical Engineering or equivalent
Previous High Voltage Testing and Commissioning experience
Diagnostics and Fault Finding experience
Good understanding of power and protection principles and a thorough understanding of wiring diagrams and technical drawings
Ability to compile test documents and write test procedures and engineering reports
Good knowledge of transformer, generator and circuit breaker design, construction, and operation
General testing of substation apparatus
Fault finding and investigation work on a variety of high/low voltage equipment
Implement grading studies/alterations to protection settings
Test and Commissioning of protection relays and apparatus

Job Responsibility

Work as part of a highly skilled Engineering Division supporting all aspects of HV Commissioning and services to clients and customers
Support peers in the delivery of HV Projects
Support the regional Engineering teams with Test and Commissioning works required at various sites
Act as Senior Authorised Person

What we offer

24 annual leave plus bank holidays with the option to buy more
Group Personal Pension Plan
Career development & progression with the opportunity to earn professional qualifications
24/7 access to a virtual GP and Mental health support & counselling services
Cycle to Work scheme
Discount club - supermarkets, phone bills, gyms & more
Life assurance cover
Enhanced Maternity Pay
Long service recognition
Active local social committees

Fulltime

Hv Commissioning Engineer

The UK’s Power sector is evolving and expanding rapidly to meet increasing custo...

Location

United Kingdom , Glasgow

Salary:

Not provided

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

Scottish Power Authorisation EN1, W1, SR3, WL1.05 & WL1.08 preferred or previous relevant DNO experience essential (Only for SPEN Projects)
Must be familiar with Distribution and Transmission (132kV) Level protection systems
Knowledge of Omicron numerical protection test equipment – Advanced Distance / Differential and Control Centre a distinct advantage
Familiarity with Schneider / GE (Agile) / Siemens (Digsi 4 & 5) software packages would be a distinct advantage
Understanding of IEC61850 substation Scada protocol preferred
Ability to supervise and advise site installation teams on aspects of protection installation

Job Responsibility

Attend commissioning meetings with representatives from our clients engineering and operational teams
Undertaking Site Acceptance Testing for major items of plant (From LV up to and including 132kV Transmission Level. Circuit Breakers / Transformers / P&C Panels / AVC etc)
The commissioning, interfacing, and setting to work of equipment, including: LV Switchgear (Manufacturers include Brush / Schneider), HV Switchgear (Siemens / Schneider and Legacy Switchgear types), Substation Ancillary systems (Battery Chargers / Local Control Interface panels / HMI / LV AC Supplies etc / Comms / Scada Control Panels (RTU))
Wide knowledge of Protection relays including Alstom, Schneider, Siemens including Settings input / PSL / CFC / Logic diagrams
Preparation of installation Cable Schedules and Core Sheets
Demonstration of commissioned plant to our client's representatives to gain plant sign off
Completion of commissioning records ensuring that all progress and equipment settings are recorded for the O&M manuals

What we offer

24 days annual leave plus bank holidays
Option to buy up to 5 additional holidays
Group Personal Pension Plan
Career development & progression with the opportunity to earn professional qualifications
24/7 access to a virtual GP and Mental health support & counselling services
Cycle to Work scheme
Discount club - supermarkets, phone bills, gyms & more
Life assurance cover
Long service recognition
Enhanced Maternity Pay

Fulltime

Senior Commissioning Engineer – Subsea & Electrical (Power Cables)

QatarEnergy is seeking an experienced Senior Commissioning Engineer – Subsea & E...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electronics & Communications Engineering or related discipline
Minimum 15 years’ experience in the Oil & Gas industry
At least 10 years in telecom commissioning for onshore/offshore facilities
Strong FEED and EPIC experience with proven capability to review, comment, and approve contractor deliverables
In-depth technical expertise in offshore telecom systems (CCTV, radio, PA/GA, IP telephony, network infrastructure, NMS, structured cabling, AIS, ACS)
Demonstrated ability to coordinate and lead complex commissioning activities under pressure
HV qualifications including: City & Guilds HV AP/SAP authorization (or equivalent)
NFPA?70E / OSHA arc?flash training
Experience with IEC?60840 test/commissioning for 132?kV cables
Familiarity with fiber optic testing (OTDR, attenuation)

Job Responsibility

Review, comment, and approve contractor engineering deliverables including design documents, commissioning procedures, system architecture drawings, test plans, and as?built documentation
Provide technical oversight during FEED and EPIC phases to ensure design compliance with project requirements, international standards, and operability targets
Ensure all commissioning requirements (testing, tools, spares, documentation, procedures) are correctly implemented early in the project lifecycle
Lead and execute commissioning activities for a wide range of offshore telecom systems
Ensure safe and compliant pre?commissioning/commissioning of 132?kV subsea and onshore power cable systems
Plan, organize, and execute pre?commissioning and commissioning activities in accordance with project schedules
Lead multicultural teams (contractors, vendors, technicians, offshore personnel) during field execution
Ensure technical issues are resolved promptly to avoid schedule delays, providing on?site troubleshooting and engineering support
Ensure readiness for start?up, including validation of system functionality, interfaces, and integration with subsea and topside systems
Champion QatarEnergy HSE standards, ensuring safe execution of all work activities

Fulltime

Hv Substation And Ohtl Design Engineer

We are seeking an HV Design Engineer – Technical Advisory & Design Support withi...

Location

Egypt , Cairo

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

Bachelor's degree in electrical engineering / Power Systems Engineering
Minimum 4–8 years of proven experience in HV substation and OHTL engineering, design review, or engineering consultancy roles
Strong understanding of HV protection schemes, grid interconnections, and utility requirements, including telecom dependencies
Solid knowledge of substation communication systems and IEC 61850 concepts
High familiarity with international standards (IEC, IEEE, EN, NFPA) and regional grid codes in the GCC and MENA region

Job Responsibility

Act as Lead Consultant / Task Manager for Lenders’ Technical Advisory [LTA] & Owner Engineer [OE & PMC]
Represent Technical Centre For Power & Utilities [TCPU] for HV Substation and OHTL scopes across assigned projects
Review and interpret project technical requirements from a HV electrical perspective under OE / PMC / IE roles
Review and verify compliance of HV equipment technical specifications against owner requirements and applicable IEC, IEEE, etc., and utility standards
Review vendor engineering document packages for HV substations and transmission systems
Review and coordinate substation telecom and communication systems
Review integrated protection–communication architectures and ensure redundancy, availability, and utility acceptance
Consolidate technical comments and recommendations into Comment Resolution Sheets [CRS] in accordance with company QA/QC procedures
Review FAT, SAT, testing procedures, and commissioning results for HV, protection, SCADA, and telecom-related systems
Participate in site visits, inspections, energization readiness reviews, and commissioning activities as required

Qualified Supervisor NERS

Location

United Kingdom , Gravesend

Salary:

Not provided

Beautiful Recruitment

Expiration Date

Until further notice

Requirements

Demonstrable experience supervising electrical distribution works on LV/HV networks (DNO, IDNO, ICP or equivalent regulated environment)
Strong working knowledge of quality assurance and audit-ready record keeping (project files, ITPs, test sheets, as-builts, NCRs and close-out packs)
Proven ability to lead safe delivery: confident challenging unsafe practices, stopping work where required, and implementing corrective actions
Experience supervising subcontracted works and labour-only resource, ensuring standards, competence and controls are maintained
Ability to interpret and apply DNO/IDNO specifications, approved designs, standards and manufacturers' instructions
Calm, clear communicator with the confidence to coordinate site teams, client representatives and commissioning / authorising personnel
Competent with Microsoft 365 (Word/Excel/Outlook) and digital QA / document control systems
Full UK driving licence
Practical knowledge of LV and HV distribution construction activities relevant to the accredited scopes (e.g., cable installation, joint bays, terminations/jointing interfaces, substations/plant install, earthing and bonding, reinstatement)
Understanding of inspection, testing and commissioning requirements and the ability to review/verify test results and completion documentation

Job Responsibility

Provide technical supervision of ICP site activities within the NERS scope (construction, commissioning and handover as applicable), ensuring work is delivered to DNO specifications and approved designs
Verify that safe systems of work are in place: review and approve RAMS, permits and switching / outage plans as required by the project and authorisations
Confirm competence and authorisation of operatives and subcontractors undertaking ICP works
ensure supervision levels are appropriate to risk, complexity and experience
Undertake routine and targeted site audits/inspections, capturing findings, corrective actions and lessons learned in an auditable format
Ensure inspection, testing and commissioning activities are planned, completed and recorded correctly (including pre-energisation checks and as-built documentation)
Support the NERS management system by maintaining accurate technical records: supervision logs, ITP sign-offs, test results, non-conformance reports (NCRs) and close-out evidence
Provide technical input into planning and delivery (constructability, sequencing, temporary works interface, materials/plant selection and QA hold points)
Act as a technical point of contact during internal and external audits (NERS/LRQA and DNO/IDNO), supporting evidence packs and responding to findings and corrective actions

Fulltime

New

Senior Electrical Engineer

An exciting opportunity has arisen for an experienced Senior Electrical Engineer...

Location

United Kingdom , Bristol

Salary:

65000.00 GBP / Year

Morson Talent

Expiration Date

Until further notice

Requirements

Degree qualified in Electrical Engineering or a related discipline (BEng, MEng, BSc, MSc or equivalent)
Chartered Engineer status or working towards Chartership
Experience within nuclear, power generation, utilities, defence, oil & gas or other highly regulated industries
Strong understanding of high-voltage electrical systems, including: 11kV switchboards, Generator circuit breakers, Insulated phase busducts, Power transformers (up to 600MVA), 400kV grid connections and switchgear, National Grid interfaces and Grid Code requirements
Experience producing HV specifications, datasheets and drawings
Knowledge of electrical system studies and analysis (ETAP desirable)
Understanding of relevant standards including IEC, IEEE and BS standards
Experience producing high-quality technical documentation and engineering deliverables
Strong communication and stakeholder management skills
Ability to work collaboratively within multidisciplinary project teams

Job Responsibility

Lead the development of electrical engineering designs and technical solutions
Support projects from concept design through to commissioning
Produce and review technical specifications, calculations, reports and design documentation
Support systems engineering activities and requirements capture
Ensure compliance with relevant engineering standards, regulations and quality requirements
Review and check engineering deliverables produced by junior engineers
Provide technical guidance and mentoring to developing engineers
Liaise with clients, regulators and key project stakeholders
Support project planning, cost estimation and risk management activities
Develop and maintain strong client and internal relationships

What we offer

Long-term career development opportunities
Flexible and hybrid working arrangements
Exposure to major nuclear, energy and infrastructure projects
Chartership support and ongoing professional development
Opportunity to work on projects that support the UKs transition to a low-carbon future

Fulltime

Electrical Design Engineer

Location

United Kingdom , Borehamwood

Salary:

Not provided

JRL Group

Expiration Date

Until further notice

Requirements

Demonstrable experience and knowledge/qualifications in Electrical Building Services Engineering design
Autodesk CAD and Microsoft Office packages
Experience of site works including mechanical condition surveys and snagging/inspection during construction works, experience of commissioning witnessing
Experience in specification writing (NBS or NES type) would be beneficial
Experience in thermal modelling/EPC assessment would be beneficial
Experience of sustainable design solutions
Knowledge and application of Building Regulations (Part L, Part F etc.) and appropriate British Standards (heating, natural gas, pipework systems etc.)
Knowledge of RIBA Plan of Work/BSRIA Building Services Design Framework process
Ability to manage workload of multiple projects and prioritise workload
Working as part of a team or autonomously

Job Responsibility

Defining the installation requirements of electrical systems and components
Responsible for undertaking electrical services design including lighting, small power, fire alarms, CCTV and security system
Preparation and configuration of standard and custom wiring drawings
Performing electrical load analysis
The selection and application of materials and processes appropriate to each design element
Supporting Mechanical Design Engineers within the group with guidance on electrical issues
Supporting problem solving during manufacturing build process and through aftermarket queries
HV/ LV designing
Producing lighting and cable calculations using Amtech and Dialux
Coordinate with the 2D and 3D CAD and Revit MEP teams to create models

What we offer

Company Pension Scheme
Private Healthcare
Opportunity for progression within the business
An opportunity to work on some of the nation’s most exciting Construction projects
Dedicated Training & Development Department
A stimulating & dynamic environment
Newly refurbished Gym & Multi-purpose Studio in Head Office
In-house barista
Subsidised Cafeteria
Team bonding events

Fulltime

New

Field Operations Specialist

The HV Technician II will provide electrical, high-voltage (HV), and substation ...

Location

United States , Edinburg

Salary:

Not provided

EDP

Expiration Date

June 22, 2026

Requirements

Associate’s degree in electrical engineering technology or an equivalent combination of training and experience
5+ years of relevant technical experience
experience in power generation or distribution is preferred
Electrical trade certifications (e.g., four-year line or substation apprenticeship) or an equivalent combination of training and experience
Advanced knowledge of medium- and high-voltage substation electrical equipment, collection systems, and transmission lines maintenance and operations
Experience with relay and protection fundamentals
Experience with LOTO and OTO procedures
Ability to operate a motor vehicle and possession of a valid driver’s license
Experience with establishing HV field service preferred
Familiarity with the operation of capacitor banks, transformer load tap changers, and motor operated air breaks

Job Responsibility

Monitor and provide electrical, high-voltage, and substation support to operating wind farms in an assigned region
Provide 24/7 on-call support
Provide support for electrical design, engineering, testing, and construction as requested
Perform tests and repairs for switching and construction activities as requested
Support and coordinate commissioning, start-up, and initial operating activities
Oversee the HV spare parts inventory and warehouse
Perform safely switching and grounding of step-up transformers, feeder breakers, gang-operated switches, and other related components
Operate equipment such as bucket/line trucks, forklifts, and aerial lifts
Perform, analyze, and create reports on infrared inspections, battery maintenance, dielectric oil, and SF6 sampling
Lead substation maintenance via Orders To Operate (OTOs), SAP work orders, outage planning, and other related activities

Fulltime

!

Select Country

Hv Commissioning Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Hv Commissioning Engineer

Hv Commissioning Engineer

Hv Commissioning Engineer

Senior Commissioning Engineer – Subsea & Electrical (Power Cables)

Hv Substation And Ohtl Design Engineer

Qualified Supervisor NERS

Senior Electrical Engineer

Electrical Design Engineer

Field Operations Specialist

Our AI answers in your language