HSE Coordinator – Installation Phase Job at Select Offshore

Construction HSE Engineer (PTW Coordinator)

Construction HSE Engineer- Permit to Work Coordinator verifies and ensures that ...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

Bachelor’s Degree preferably in Engineering or Science from a reputed University
Minimum 10 years’ experience in HSE in construction, fabrication, installation and/or commissioning projects / operations in the oil & gas or petrochemical industries
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
NEBOSH GC/IGC. Diploma in Safety or any other HSE Certification (considered at ADNOC Group discretion)
Lead auditor ISO 45001/ ISO 14001 or equivalent. Incident Investigation technique
ADNOC approval will be an advantage
Additional HSE Trainings / Certifications will be added advantage
Have strong understanding of the HSE issues, practices and behavioural aspects in the Oil & Gas EPC business
Able to lead a team of HSE professionals such as HSE Engineers, Sr. HSE officers, HSE officers etc

Job Responsibility

Ensure that the “Permit to Work (PTW) Procedure” is followed, permits are distributed, opened and closed according to procedural requirements, ensuring that permits are correctly completed by the Issuing Authority and the Performing Authority, and finally archived
The WPC will be holder of the PTW Register. All Permits shall be registered daily before allowed their validity
When a PTW is closed or suspended the WPC must update the PTW Register accordingly
To perform the Job Hazardous Analysis (JHA) and participate to the Job Safety Analysis (JSA)
Verify the adequacy and application of the Site HSE Plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE Training activities on site
To organize and participate to all relevant site HSE Meetings, prepare the relevant MOM

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Construction HSE Engineer (LOTO Coordinator)

Report to the HSM or, while he / she is the TCM HSE representative at site, and ...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

A Bachelor’s Degree in any Engineering Course
Minimum 10 years’ experience in HSE in construction, fabrication, installation and/or commissioning projects / operations in the oil & gas or petrochemical industries focusing in LO-TO coordination
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
Holding a NEBOSH GC/IGC certificate
Diploma in safety or any other HSE Certification (considered at ADNOC Group discretion)
ADNOC approval will be added advantage
Excellent communications and interpersonal skills
Attention to detail, management skills
Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution

Job Responsibility

Report to the HSM or, while he / she is the TCM HSE representative at site, and reports to the Site Manager
Verifies and ensures that all field activities are performed according to the TCM HSE policy, the regulations, standards and procedures, promoting all preventive and corrective action as required
To perform the job hazardous analysis (JHA) and participate to the job safety analysis (JSA)
Verify the adequacy and application of the site HSE plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed necessary
To check that subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, inspections and audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE training activities on site
To organize and participate to all relevant site HSE meetings, prepare the relevant MOM
To cooperate with the client concerning the issue of any necessary work permits

What we offer

Single Status
Accommodation (Meals) provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Hse Engineer (lo-to Coordinator)

Report to the HSM or, while He/She is the TCM HSE representative at site, and re...

Location

United Arab Emirates , Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

Bachelor’s Degree preferably in Engineering or Science from a reputed University
Minimum 10 years’ experience in HSE in construction, fabrication, installation and/or commissioning projects / operations in the oil & gas or petrochemical industries focusing in LO-TO Coordination in Electrical Field
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
NEBOSH GC/IGC. Diploma in Safety or any other HSE Certification (considered at ADNOC Group discretion)
Fluent English
Excellent analytical skills
Excellent communications and interpersonal skills
Strong interpersonal, team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution
Attention to detail, strong communications and interpersonal skills

Job Responsibility

Report to the HSM or, while He/She is the TCM HSE representative at site, and reports to the Site Manager
Verifies and ensures that all Field activities are performed according to the TCM HSE Policy, the regulations, standards and procedures, promoting all preventive and corrective action as required
To perform the Job Hazardous Analysis (JHA) and participate to the Job Safety Analysis (JSA)
Verify the adequacy and application of the Site HSE Plan and all related procedures, to the preparing any revisions
To update the HSE documentation during all the construction phases when deemed Necessary
To check that Subcontractors perform their activities in accordance with all the HSE applicable procedures, regulation and standards, promoting all necessary action to ensure that the said procedures and regulations are observed
To organize, plan and participate to periodical HSE walk around, Inspections and Audits on site, prepare all the relevant reports, action plans, verify the follow up and the timely execution of the corrective action
To organize, coordinate and directly participate in the HSE Training activities on site
To organize and participate to all relevant site HSE Meetings, prepare the relevant MOM
To co-operate with the Client concerning the issue of any necessary work permits

What we offer

Single Status
Accommodation on Site
Local Transportation on Site
Round trip ticket to home country on each rotation (Economy class)

Fulltime

Construction Supervisor - Mechanical

Airswift is an international workforce solutions provider within the energy, pro...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Degree or Diploma in Mechanical Engineering from an internationally recognized University
Preferably formal training in QA/QC functional aspects
Minimum 10 years overall experience in static and rotating equipment installation, including inspection coordination experience in construction of midstream/downstream Oil & Gas facilities
Experience as an EPIC Contractor supervisor essential
Experience as a Client or PMC supervisor preferred
Current experience in State of Qatar industrial cities and/or other GCC countries required
Extensive knowledge of international and industry specific codes & standards including ASME, ANSI, ISO, API, NFPA, SHELL DEP's etc.
Mechanical inspector certificates (API 510 & API 653) would be an advantage
Extensive experience in coating systems and procedures including painting, galvanizing, wrapping, insulation, Refractory Lining etc.
BGAS / API certification would be an advantage

Job Responsibility

Liaise with the HSE Supervisor on safety-related matters and act as a safety leader on site
Report to the Discipline Construction Lead/Senior Construction Supervisor on key issues, site events, progress, trends, and improvement recommendations
Assist the functional supervisor in reviewing and/or approving construction documentation, including Method Statements, JHAs, MARs, and participate in HSE walkthroughs
Supervise all EPIC contractor static & rotating equipment inspection and installation activities in line with approved engineering documentation and project schedules
Attend Requests for Inspection (RFIs) as per approved ITPs, including material receiving inspections, in coordination with the Lead Construction Supervisor, and sign off relevant reports
Ensure quality of manufacturing and erection works, including dimensional accuracy, correct orientation, and compliance with material design specifications
Lead contractors on all mechanical aspects related to static and rotating equipment installation works
Supervise EPIC contractors during execution of static (including internals) and rotating equipment installation, FAT, alignment inspection, punch clearing, pressure testing, pre-commissioning, and reinstatement activities
Manage and lead final mechanical completion inspections and punch closure activities
Supervise pre-commissioning activities to ensure safety and quality standards are achieved

Fulltime

Commissioning Manager

Location

France , Marseille

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

5–7 years’ experience in commissioning, ideally within data centres or complex infrastructure projects
Strong technical background in MEP systems
Proven experience across the full project lifecycle
Demonstrated ability to manage teams and multi-disciplinary stakeholders
Strong coordination, communication, and problem-solving skills
English: professional required
French: professional preferred

Job Responsibility

Lead commissioning strategy during the design phase, including reviews, input, and planning
Develop and implement commissioning plans, procedures, and schedules
Coordinate and oversee FAT, SAT, and full system validation activities
Manage installation, commissioning, and performance testing of MEP systems
Drive all on-site commissioning activities through to successful project delivery
Ensure compliance with technical specifications, quality standards, and HSE requirements
Act as key interface between contractors, subcontractors, and client teams
Produce and manage commissioning documentation, reports, and handover packages
Lead and coordinate commissioning teams on-site
Monitor performance, timelines, and deliverables

Electrical Supervisor

To provide strong electrical expertise during the installation and finishing pha...

Location

Spain , Madrid

Salary:

Not provided

Nordex Group

Expiration Date

Until further notice

Requirements

Vocational technical studies (FPII/Technical Diploma) – mandatory
Engineering degree (Electrical, Electromechanical, Mechatronics, Mechanical) is a plus
Minimum 3 years of experience in the wind industry
Previous experience working in wind farms (installation, electrical works, commissioning or maintenance)
Comfortable working at heights and in demanding HSE environments
Experience leading teams or working in quality roles is highly valued
Solid electrical knowledge and strong hands‑on approach
Good computer skills (Office, reporting tools, technical platforms)
Resourceful, problem‑solving mindset, with the ability to make decisions on site
Strong focus on safety, quality and operational excellence

Job Responsibility

Provide technical electrical support during the installation, connection, adjustment and finishing phases of the WTG
Identify and support the resolution of electrical and quality deviations to ensure smooth commissioning and long‑term turbine reliability
Ensure full compliance with HSE requirements on site and intervene whenever safety rules are not followed
Coordinate and launch electrical technical modifications in close collaboration with the Engineering department
Deliver technical guidance and on‑site training to supervisors and field teams
Support the improvement of electrical instructions, work methods and procedures related to installation and finishing
Collaborate in prototype testing and validation of new electrical solutions
Report the status of site activities, preparing and submitting the required technical documentation
Perform electrical quality checks on site, including complete reporting of findings and corrective actions
Participate actively in the coordination of site activities and in continuous improvement initiatives

Fulltime

Commissioning Site Lead

We are looking for a Commissioning Site Lead with the following details : Work L...

Location

United Arab Emirates , Dubai

Salary:

Not provided

Lobellia

Expiration Date

Until further notice

Requirements

Total Experience Required: 15+ years of experience in Oil & Gas Project activities
Relevant Experience Required: Proven track records of several successful assignments on similar office/site positions
Industry-Specific Experience: Extensive experience with onshore installation in Oil and Gas
Minimum Qualification Required: Diploma/Degree in Engineering
Language Proficiency: Fluent in English (absolute mandatory)
Previous project experience with Oil and Water Treatment, LP to HP gas compressors, and Gas Dehydration
Vast experience in monitoring large Oil & Gas EPCC Contractors at site from a client perspective

Job Responsibility

Assist the Commissioning Manager in finalizing the Mobilization Plan, Recruitment of the CPY Commissioning Team, and ensuring HSE compliance
Oversee pre-commissioning and commissioning preparation, execution, and associated deliverables, ensuring they meet OPERCOM methodology and standards
Facilitate collaboration across teams, manage interfaces with other projects, and ensure successful execution of commissioning activities, meeting defined criteria for handover to Operations
During preparation (Engineering) phase: Assist in mobilization planning and recruitment of the CPY Commissioning Team
Address HSE aspects in commissioning risk assessments and validate contractor procedures for safety compliance
Review or approve pre-commissioning and commissioning preparation deliverables (plans, methods, procedures, drawings, lists) aligning with OPERCOM methodology
Oversee EPSCC CTR's preparation tasks, including scope, priorities, resources, and schedule
Approve Pre-commissioning and Commissioning dossiers, ensuring ICAPS database quality
Coordinate Commissioning discipline Leads and support NWP Pre-commissioning and Commissioning preparation
Validate team training and competency in COMPANY standards and commissioning methodology

Fulltime

Lead Instrument & ICSS Engineer

This Lead Instrument & ICSS Engineer opportunity is with a major affiliate opera...

Location

United Kingdom , Leatherhead

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 15 years in ICSS/Instrumentation engineering within Oil & Gas projects
At least 10 years in similar roles on medium to large-scale upstream projects
Experience across all project phases: FEED, detailed engineering, procurement, fabrication, installation, and commissioning
Deep knowledge of international codes and standards for Instruments, ICSS, and Telecom
Strong understanding of engineering compliance, value engineering, and technical safety methodologies
Engineering degree
Fluent in English
Excellent communication, problem-solving, and decision-making abilities
Proven ability to lead teams and coordinate across disciplines in multicultural environments
Availability for missions to Iraq (approximately 15 days per year), with first mission expected in January 2026

Job Responsibility

Lead instrumentation and ICSS engineering activities across FEED, detailed engineering, procurement, fabrication, installation, and commissioning phases
Ensure engineering compliance with international codes and standards for Instruments, ICSS, and Telecom systems
Drive value engineering initiatives and technical safety processes including HAZOP and SIL workshops
Coordinate across multiple engineering disciplines and lead technical teams in multicultural environments
Maintain strong leadership in HSE matters and promote safety culture across the project

Select Country

HSE Coordinator – Installation Phase

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?