Hourly Electronic Repair Technician Job at Cleveland-Cliffs (Middletown)

Electronic Technician (Radio)

The scope of work to be performed by the Electronic Technician includes, but is ...

Location

United States , Jackson

Salary:

37.30 - 49.73 USD / Hour

AMTRAK

Expiration Date

Until further notice

Requirements

Applicants will be required to qualify for the position by passing the electronic technician examination for communications prepared by System Communications Engineering Department
The technician must be familiar with the division reporting structure, possess knowledge of data and voice circuit electronics, and have general knowledge of electronics
Must be capable of learning, understanding, and maintaining Amtrak’s cable plant
Must be a minimum of 18 years of age and a high school graduate
Applicants must have a valid driver’s license on the date of hire
Must be able to read and understand job information written in English
Applicants must be able to perform basic mathematical computations including fractions and decimals
Must wear personal protective equipment (PPE) such as safety glasses, safety boots, hard hats and reflective vests, outside work with exposure to all weather conditions. This includes wind, extreme cold and heat on or in close proximity to railroad tracks, highways, and waterways in noisy environments due to machinery and heavy work vehicles in the area
Occasionally work in confined spaces
Climbs and performs duties on ladders, scaffolds, bucket trucks, scissor lifts at heights above 30 feet carrying 25 lb. tool bag in wet conditions and constricted areas

Job Responsibility

Testing, inspecting, installing, maintenance and repair of all signal equipment
Perform digging, trenching, and painting duties while working independently
Observes safe work performance standards and operations in completion of daily tasks and provide prompt reporting in cases of accidents, injuries, and illnesses
Attends safety briefings when assigned by Foreman, observes safety compliance, maintains qualifications (GCOR) and coordinates with other departments
Monitors and ensures that all necessary tools and materials for completion of work is provided
Participates in the planning and directing of testing and maintenance of signal equipment such as relays, batteries, switch machines, signal fixtures, cable, and drag equipment detectors
Conduct testing for switch machinery, batteries for plant grounds, relays and cable for specifications, track signals, circuits for route locking, crossing track, locking points and balanced air, air compressors and record findings in accordance with AMT 27
Inspects test signal apparatus and systems and records the findings including the results from above in accordance with AMT 27
Maintains and repairs the above in accordance with AMT 23 and the special instructions governing the construction of Signals and interlocking
Assists Signalman in performance of assigned duties and conducts his/her own equipment tests and records results

What we offer

Health, dental and vision plans
Wellness programs
Flexible spending accounts
401K retirement plan
Life insurance
Paid time off
Reimbursement of education
Public Service Loan Forgiveness eligibility
Railroad Retirement sickness and retirement benefits
Rail pass privileges

Fulltime

Electronics Technician Supervisor

The Electronics Technician (ET) Supervisor will be responsible for working with ...

Location

United States , Charleston

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

Valid USA passport
Able to obtain a T1 Clearance
Pass internal background checks
Valid driver’s license
Able to perform job duties in extreme, cold, dark, work environments
Pass medical and dental examination prior to deployment
Knowledge and experience performing hardware maintenance
Ability to follow directions and work independently or with a team
Reliable in attendance/punctuality
Ability to practice and promote required safety standards

Job Responsibility

Coaches and trains staff
Leads, supervises and mentors assigned staff
Oversees staff and exercises supervisory personnel management responsibilities
Required travel to Antarctica up to 6 months a year
Works closely with the government project manager
Coordinates workshops and meetings
Recommends policies, doctrine, tactics, and procedures
Coordinates and interfaces with various Department of Defense (DoD), non-DoD, and international participants
Provides subject material to develop technical documentation
Responsible for ensuring that all ET contract deliverables are tracked and submitted on time

What we offer

Medical
Dental
Vision
Company Life Insurance
Short-Term and Long-Term Disability Insurance
401(K) Immediate Vesting
Professional Development Assistance
Legal Aid Assistance Program
Family Planning / Fertility Assistance
Personal Time Off

Fulltime

Electronics Box Build Technician

Autonomous robots are core to Dexory’s product offering. We design, build, and t...

Location

United Kingdom , Wallingford

Salary:

Not provided

Dexory Using

Expiration Date

Until further notice

Requirements

High school diploma or equivalent (City & Guilds / NVQ Level 3 in Electrical/Electronic Eng.)
technical certificate or associate degree in electrical, electronics or proven industry experience in related fields preferred
Experience of working in a technical function
both autonomously and as part of a team.
Experienced in manual build and assembly processes of complex, high precision mechanical and electrical systems
Accountable for build and preparation of complete products, on time as well as respective sub-assemblies
2+ years of experience in electronic or electromechanical assembly, particularly box build or control panel assembly.
Proficient in reading, creating and interpreting wiring diagrams, schematics, mechanical drawings, and work instructions.
Skilled in soldering, crimping, cable routing, and mechanical assembly.
Familiarity with IPC-A-610, IPC/WHMA-A-620, or similar workmanship standards.

Job Responsibility

Build of sub-assemblies as defined by the work instructions
Assembly of the product as defined by the work instructions
Support the assembly and debug process of the robots for various practices, as well as the wider business to see that objectives are achieved and excelled
Drive continuous improvement ensuring latest technologies and techniques are used throughout the product as well as assembly process.
Assemble complex electrical and electronic enclosures (box builds) according to mechanical drawings, wiring schematics and assembly instructions.
Route, bundle, and secure wire harnesses and cable assemblies within tight mechanical constraints.
Mount and install PCBs, power supplies, relays, terminal blocks, and other components.
Conduct continuity, insulation resistance, and functional tests on completed assemblies.
Perform troubleshooting and rework of faulty assemblies or wiring looms with minimal supervision.
Document build issues and provide feedback for design improvements or manufacturability.

What we offer

Private healthcare via Bupa with 24/7 medical helpline
Life insurance
Income protection
Pension: 4+% employee with option to opt into salary exchange, 5% employer
Employee Assistance Programme - mental wellbeing, financial and legal advice/support
25 holidays per year
Full meals onsite in Wallingford
Fun team events on and offsite, snacks of all kinds in the office

Fulltime

Field Service Technician II

The Associate, Field Service II’s primary responsibility is to perform complex r...

Location

United States , Indianapolis

Salary:

43200.00 - 59400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Applicable technical or trade school training preferred
2+ years working with medical devices in a hands-on environment required
Experience working with FDA-supervised products preferred
Previous driving/delivery experience preferred
Adapts to new technologies and becomes comfortable with the Microsoft Office Suite of products
Valid driver’s license and driving record that meets company and state requirement
Ability to acquire and maintain a DOT physical card required
Schedule flexibility/on-call
Occasional overnight travel may be required

Job Responsibility

Attend monthly safety meetings
Demonstrate a proactive approach to safety awareness and compliance
Optimally complete all required safety and compliance learning modules on a timely basis
Complete medical testing in a timely manner
Sustain a clean and safe work environment, including 5S activities
Safely operate a fleet vehicle ranging in size from a cargo van up to a 26,000 pound truck
Identify safety concerns and correct as vital
Ability to lift and carry up to 65 pounds using appropriate processes, including proper safety and ergonomic procedures
Performs complex repairs on medical products. These are repairs beyond simple and minor cosmetic repairs or component replacements
Performs electronic, hydraulic, and pneumatic systems troubleshooting and repair of assigned products

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Field Service Technician II

The Associate, Field Service II’s primary responsibility is to perform complex r...

Location

United States , Indianapolis

Salary:

43200.00 - 59400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Applicable technical or trade school training preferred
2+ years working with medical devices in a hands-on environment required
Experience working with FDA-supervised products preferred
Previous driving/delivery experience preferred
Adapts to new technologies and becomes comfortable with the Microsoft Office Suite of products
Valid driver’s license and driving record that meets company and state requirement
Ability to acquire and maintain a DOT physical card required
Schedule flexibility/on-call
Occasional overnight travel may be required

Job Responsibility

Attend monthly safety meetings
Demonstrate a proactive approach to safety awareness and compliance
Optimally complete all required safety and compliance learning modules on a timely basis
Complete medical testing in a timely manner
Sustain a clean and safe work environment, including 5S activities
Safely operate a fleet vehicle ranging in size from a cargo van up to a 26,000 pound truck
Identify safety concerns and correct as vital
Ability to lift and carry up to 65 pounds using appropriate processes, including proper safety and ergonomic procedures
Perform complex repairs on medical products
Perform electronic, hydraulic, and pneumatic systems troubleshooting and repair of assigned products

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave
Commuting benefits
Employee Discount Program
Employee Assistance Program (EAP)

Fulltime

Field Service Technician II

The Associate, Field Service II’s primary responsibility is to perform complex r...

Location

United States , Indianapolis

Salary:

43200.00 - 59400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Applicable technical or trade school training preferred
2+ years working with medical devices in a hands-on environment required
Experience working with FDA-supervised products preferred
Previous driving/delivery experience preferred
Adapts to new technologies and becomes comfortable with the Microsoft Office Suite of products
Valid driver’s license and driving record that meets company and state requirement
Ability to acquire and maintain a DOT physical card required
Schedule flexibility/on-call
Occasional overnight travel may be required

Job Responsibility

Attend monthly safety meetings
Demonstrate a proactive approach to safety awareness and compliance
Optimally complete all required safety and compliance learning modules on a timely basis
Complete medical testing in a timely manner
Sustain a clean and safe work environment, including 5S activities
Safely operate a fleet vehicle ranging in size from a cargo van up to a 26,000 pound truck
Identify safety concerns and correct as vital
Ability to lift and carry up to 65 pounds using appropriate processes, including proper safety and ergonomic procedures
Performs complex repairs on medical products. These are repairs beyond simple and minor cosmetic repairs or component replacements
Performs electronic, hydraulic, and pneumatic systems troubleshooting and repair of assigned products

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Field Service Technician II

The Associate, Field Service II’s primary responsibility is to perform complex r...

Location

United States , Indianapolis

Salary:

43200.00 - 59400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED required.
Applicable technical or trade school training preferred.
2+ years working with medical devices in a hands-on environment required.
Experience working with FDA-supervised products preferred.
Previous driving/delivery experience preferred.
Adapts to new technologies and becomes comfortable with the Microsoft Office Suite of products.
Valid driver’s license and driving record that meets company and state requirement.
Ability to acquire and maintain a DOT physical card required.
Schedule flexibility/on-call.
Occasional overnight travel may be required.

Job Responsibility

Attend monthly safety meetings.
Demonstrate a proactive approach to safety awareness and compliance.
Optimally complete all required safety and compliance learning modules on a timely basis.
Complete medical testing in a timely manner.
Sustain a clean and safe work environment, including 5S activities.
Safely operate a fleet vehicle ranging in size from a cargo van up to a 26,000 pound truck.
Identify safety concerns and correct as vital.
Ability to lift and carry up to 65 pounds using appropriate processes, including proper safety and ergonomic procedures.
Performs complex repairs on medical products.
These are repairs beyond simple and minor cosmetic repairs or component replacements.

What we offer

Medical and dental coverage that start on day one.
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance.
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount.
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching.
Flexible Spending Accounts.
Educational assistance programs.
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave.
Commuting benefits.
Employee Discount Program.
Employee Assistance Program (EAP).

Fulltime

Field Service Technician II

The Associate, Field Service II’s primary responsibility is to perform complex r...

Location

United States , West Chester

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Applicable technical or trade school training preferred
2+ years working with medical devices in a hands-on environment required
Experience working with FDA-supervised products preferred
Previous driving/delivery experience preferred
Adapts to new technologies and becomes comfortable with the Microsoft Office Suite of products
Valid driver’s license and driving record that meets company and state requirement
Ability to acquire and maintain a DOT physical card required
Schedule flexibility/on-call
Occasional overnight travel may be required

Job Responsibility

Attend monthly safety meetings
Demonstrate a proactive approach to safety awareness and compliance
Optimally complete all required safety and compliance learning modules on a timely basis
Complete medical testing in a timely manner
Sustain a clean and safe work environment, including 5S activities
Safely operate a fleet vehicle ranging in size from a cargo van up to a 26,000 pound truck
Identify safety concerns and correct as vital
Ability to lift and carry up to 65 pounds using appropriate processes, including proper safety and ergonomic procedures
Perform complex repairs on medical products. These are repairs beyond simple and minor cosmetic repairs or component replacements
Perform electronic, hydraulic, and pneumatic systems troubleshooting and repair of assigned products

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Hourly Electronic Repair Technician

Cleveland-Cliffs

Location:
United States , Middletown

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Hourly Electronic Repair Technician

Electronic Technician (Radio)

Electronics Technician Supervisor

Electronics Box Build Technician

Field Service Technician II

Field Service Technician II

Field Service Technician II

Field Service Technician II

Field Service Technician II

Hourly Electronic Repair Technician

Cleveland-Cliffs

Location:United States , Middletown

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Hourly Electronic Repair Technician

Electronic Technician (Radio)

Electronics Technician Supervisor

Electronics Box Build Technician

Field Service Technician II

Field Service Technician II

Field Service Technician II

Field Service Technician II

Field Service Technician II

Location:
United States , Middletown

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 11, 2026