Heavy Equipment Technician Job at Washington Corporations (Missoula)

Heavy Equipment Technician

Location

Antarctica , McMurdo Station; South Pole

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High School diploma or GED
Technician Level I: A minimum of two years’ experience in heavy equipment maintenance and repair required
or one years’ experience with heavy equipment maintenance and repair, in addition to one summer or winter Antarctic deployment working as a heavy equipment technician
Technician Level II: A minimum of four years’ experience in heavy equipment maintenance and repair required
or a minimum of three years’ experience with heavy equipment maintenance and repair, in addition to one summer or winter Antarctic deployment working as a heavy equipment technician I
Technician Level III: minimum of seven years’ experience in heavy equipment maintenance and repair required
Must be able to pass an oral examination consisting of 10+ questions pertaining to mechanical systems, electrical and computer systems, as well as other facets of equipment repair
Must have strong written and verbal communication skills
Proficiency in lifting and bracing large and heavy parts/equipment with jacks, cranes, floor lift and cribbing
Team player and group dynamics are of the utmost importance

Job Responsibility

Diagnoses, troubleshoots, repairs, and maintains some and/or all of the following: construction, agricultural and heavy equipment
Corrects deficiencies in components and ancillary equipment
Performs service, maintenance, repairs and overhauls in accordance with manufacturers’ recommendations
Performs extremely complex repairs on a broad range of equipment in the shop and in the field
Uses diagnostic procedures and test equipment to identify and correct equipment faults
Analyzes and diagnoses mechanical, hydraulic, pneumatic, electric, and electronic faults
Operates some and/or all of the following shop equipment including overhead cranes, welders, compressors, presses, grinders, hand tools, and tire servicing equipment
Lifts, moves and/or installs heavy parts and assemblies safely, using basic tooling and PPE
May be required to perform work outside in severe weather conditions
Complies with all ASC Environmental Health & Safety and Quality Assurance requirements and goals

Fulltime

Heavy Equipment Technician

Join Acden Mechanical Repair & Maintenance as a Field Service Technician, delive...

Location

Canada , Fort McMurray

Salary:

Not provided

Acden

Expiration Date

Until further notice

Requirements

Journeyperson Heavy Duty Technician certification (Red Seal or Alberta Trade Qualification)
5 years' experience as a Field Service Technician working on heavy duty on & off-road equipment
Proven experience in diagnostics and repairs of heavy-duty equipment
Strong understanding of workplace safety and OH&S guidelines
Ability to work both independently and as part of a team
Excellent verbal communication and documentation skills
Physically fit to handle the demands of the job (e.g., lifting, bending, standing, climbing)
Strong computer literacy, including diagnostic and reporting tools
Valid Class 5 Driver’s Licence with a clean driver’s abstract
Willingness to follow all Acden MRM policies, procedures, and ISO standards

Job Responsibility

Perform diagnostics, maintenance, and repairs on a variety of heavy-duty on and off-road equipment
Accurately complete work orders and ensure billing aligns with Acden MRM standards
Work closely with the Lead Hand to manage service requests and ensure timely job completion
Train, support, and mentor apprentices
Maintain accurate documentation and records of all work performed
Ensure safe work practices are followed at all times and attend required safety meetings
Maintain cleanliness and organization of the service truck and work areas
Manage inventory of parts and tools in the service truck
Follow ISO 9001:2015 and 14001:2015 procedures, including reporting non-conformances
Participate in customer satisfaction efforts and quality assurance processes

What we offer

Competitive wage and overtime after 8 hours per day and on weekends
Immediate enrollment in group benefits plan, including health, dental, vision, disability insurance, and life insurance
RRSP Contribution Matching Program
Employee discounts provided by Acden and Perkopolis
Access to fund program to enhance skills
Participation in Acden’s various community, family-oriented, and holiday events
Employee and Family Assistance Program
Flexible schedule for work/life balance

Fulltime

Instructor, Heavy Equipment Technician

Location

Canada , Fort McMurray

Salary:

Not provided

Keyano College

Expiration Date

Until further notice

Requirements

Alberta Journeyperson Heavy Equipment Technician certification with interprovincial Red Seal certification
Minimum 5 years’ post-journeyperson experience
Instruction and mentoring experience will also be considered
Must be a self-starter with excellent interpersonal and motivation skills
Familiarity with Microsoft Office applications such as Outlook, Word, Excel and PowerPoint
A passion for student success
Strong communication, presentation, and classroom management skills
Commitment to fostering equity, diversity and inclusion in the learning environment
Willingness to engage in continuous professional development

Job Responsibility

Develop/revise/update courses, including consulting with the Chair, Program Coordinator, faculty, advisory committees, and potential employers and students
Heavy Equipment Technician Diploma curriculum development and review
Engage in program development, assisting with the program coordinators, and participating in committee work in support of the department, division, or College
Responsible for developing teaching materials for individualized and group instruction, and incorporate technology into the learning process, where applicable
Carrying out regularly scheduled instruction, ensuring students awareness of course objectives, approach and evaluation techniques, as well as, recruitment, tutoring and academic counseling of students
Teaching responsibilities may include theory, lab, and/or clinical
This may involve evenings and weekends on occasion which will be scheduled in advance
Take the opportunity to participate in showcasing and promoting Keyano College and the HET & Extended Studies Department in the community

What we offer

Employer paid comprehensive health and dental benefits, including a health spending account
Defined Benefit pension plan (LAPP)
Northern Living Allowance of $1,040.00 per month (subject to budget approval)
Professional training and development funding is provided annually
Generous vacation entitlement and paid holidays between Christmas and New Years
Paid sick days
Relocation assistance for those who meet the criteria
Employee Service and Academic Achievement recognition awards annually
Greatly discounted employee membership to the Syncrude Sports and Wellness Centre
Tuition waiver for all employees and dependents to take courses at Keyano College

Fulltime

Heavy Equipment Field Technician

Modern Machinery has immediate opportunities for full-time, journey-level, highl...

Location

United States , Spokane

Salary:

30.00 - 51.00 USD / Hour

Washington Corporations

Expiration Date

Until further notice

Requirements

Must demonstrate troubleshooting and analytical problem-solving skills
Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting
Requires a valid driver’s license and the ability to maintain an insurable driving record
Accurately complete DOT E-Logs and maintain compliance with DOT hours of service
Must be able to work well independently or with others in a team environment
Must be reliable, honest, and have a strong work ethic
Must have strong organizational and time management skills
Must be able to effectively communicate both verbally and in writing with customers and co-workers
Must be able to lift up to 75 lbs
Must own required tools

Job Responsibility

Demonstrate Modern Machinery's core values and promote the mission and vision of the company
Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals
Independently troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines
Operate equipment as needed to assist in locating and diagnosing the failure
Utilize hand and power tools and electronic diagnostic equipment
Read and interpret complex hydraulic and electrical schematics
Perform diagnostic testing and tuning of equipment
Have the experience and ability to determine the extent of the repair and the corrective action required
Follow all safety rules and policies while performing all work assignments as specified in company handbooks
Adhere to any additional customer requirements, safety related and otherwise when working on a customer’s site

What we offer

Medical, Dental, Vision, and Prescription Insurance
Health Savings Account
401k/Roth Retirement Savings Plan with Company Match
Participation in Annual Profit-Sharing Plan
Paid Time Off (Vacation, Sick, Holiday, Bereavement & Parental Leave)
Gym Membership Reimbursement Program
Family Scholarship Program
Employee Assistance Program
Virtual Mental Health & Tele Medicine Benefit
Company Paid Life Insurance & Disability Benefits

Fulltime

Heavy Equipment Field Technician

Modern Machinery has immediate opportunities for full-time, journey-level, highl...

Location

United States , Spokane

Salary:

30.00 - 51.00 USD / Hour

Washington Corporations

Expiration Date

Until further notice

Requirements

Must demonstrate troubleshooting and analytical problem-solving skills
Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting
Requires a valid driver’s class A or B CDL and the ability to maintain an insurable driving record
Accurately complete DOT E-Logs and maintain compliance with DOT hours of service
Must be able to work well independently or with others in a team environment
Must be reliable, honest, and have a strong work ethic
Must have strong organizational and time management skills
Must be able to effectively communicate both verbally and in writing with customers and co-workers
Must be able to lift up to 75 lbs
Must own required tools

Job Responsibility

Demonstrate Modern Machinery's core values and promote the mission and vision of the company
Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals
Independently troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines
Operate equipment as needed to assist in locating and diagnosing the failure
Utilize hand and power tools and electronic diagnostic equipment
Read and interpret complex hydraulic and electrical schematics
Perform diagnostic testing and tuning of equipment
Have the experience and ability to determine the extent of the repair and the corrective action required
Follow all safety rules and policies while performing all work assignments as specified in company handbooks
Adhere to any additional customer requirements, safety related and otherwise when working on a customer’s site

What we offer

Medical, Dental, Vision, and Prescription Insurance
Health Savings Account
401k/Roth Retirement Savings Plan with Company Match
Participation in Annual Profit-Sharing Plan
Paid Time Off (Vacation, Sick, Holiday, Bereavement & Parental Leave)
Gym Membership Reimbursement Program
Family Scholarship Program
Employee Assistance Program
Virtual Mental Health & Tele Medicine Benefit
Company Paid Life Insurance & Disability Benefits

Fulltime

Heavy Equipment Field Service Technician

Modern Machinery has immediate opportunities for full-time, journey-level, highl...

Location

United States , Boise

Salary:

30.00 - 50.00 USD / Hour

Washington Corporations

Expiration Date

Until further notice

Requirements

Must demonstrate troubleshooting and analytical problem-solving skills
Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting
Requires a valid driver’s class A or B CDL and the ability to maintain an insurable driving record
Accurately complete DOT E-Logs and maintain compliance with DOT hours of service
Must be able to work well independently or with others in a team environment
Must be reliable, honest, and have a strong work ethic
Must have strong organizational and time management skills
Must be able to effectively communicate both verbally and in writing with customers and co-workers
Must be able to lift up to75 lbs
Must own required tools

Job Responsibility

Demonstrate Modern Machinery's core values and promote the mission and vision of the company
Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals
Independently troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines
Operate equipment as needed to assist in locating and diagnosing the failure
Utilize hand and power tools and electronic diagnostic equipment
Read and interpret complex hydraulic and electrical schematics
Perform diagnostic testing and tuning of equipment
Have the experience and ability to determine the extent of the repair and the corrective action required
Follow all safety rules and policies while performing all work assignments as specified in company handbooks
Adhere to any additional customer requirements, safety related and otherwise when working on a customer’s site

What we offer

Medical, Dental, Vision, and Prescription Insurance
Health Savings Account
401k/Roth Retirement Savings Plan with Company Match
Participation in Annual Profit-Sharing Plan
Paid Time Off (Vacation, Sick, Holiday, Bereavement & Parental Leave)
Gym Membership Reimbursement Program
Family Scholarship Program
Employee Assistance Program
Virtual Mental Health & Tele Medicine Benefit
Company Paid Life Insurance & Disability Benefits

Fulltime

Heavy Equipment Shop Service Technician

Modern Machinery has immediate opportunities for a full-time, journey-level, hig...

Location

United States , Belgrade

Salary:

30.00 - 51.00 USD / Hour

Washington Corporations

Expiration Date

Until further notice

Requirements

Must demonstrate troubleshooting and analytical problem-solving skills
Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting
Accurately complete DOT E-Logs and maintain compliance with DOT hours of service
Must be able to work well independently or with others in a team environment
Must be reliable, honest, and have a strong work ethic
Must have strong organizational and time management skills
Must be able to effectively communicate both verbally and in writing with customers and co-workers
Must be able to lift 75 lbs
Must own required tools
Ability to work overtime with minimal notice

Job Responsibility

Demonstrate Modern Machinery’s core values and promote the mission and vision of the company
Follow all company policies, processes, procedures. Exercise safe work practices to contribute to the achievement of the company’s safety goals
Troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines
Operate equipment as needed to assist in locating and diagnosing the failure
Utilize hand and power tools and electronic diagnostic equipment
Read and interpret complex hydraulic and electrical schematics
Perform diagnostic testing and tuning of equipment
Follow all safety rules and policies while performing all work assignments as specified in company handbooks
Assess parts to determine the cause of failure and/or their reusability
Communicate with parts department personnel to order the necessary parts required to complete repair(s)

What we offer

Medical, Dental, Vision, and Prescription Insurance
Health Savings Account
401k/Roth Retirement Savings Plan with Company Match
Participation in Annual Profit-Sharing Plan
Paid Time Off (Vacation, Sick, Holiday, Bereavement & Parental Leave)
Gym Membership Reimbursement Program
Family Scholarship Program
Employee Assistance Program
Virtual Mental Health & Tele Medicine Benefit
Company Paid Life Insurance & Disability Benefits

Fulltime

Heavy Equipment Field Service Technician

Modern Machinery has immediate opportunities for a full-time, journey-level, hig...

Location

United States , Kent

Salary:

32.00 - 55.00 USD / Hour

Washington Corporations

Expiration Date

Until further notice

Requirements

Must demonstrate troubleshooting and analytical problem-solving skills
Must be able to stand for long periods of time along with walking, climbing ladders and stairs, reaching, pulling, leaning, and twisting
Requires a valid driver’s class A or B CDL and the ability to maintain an insurable driving record
Accurately complete DOT E-Logs and maintain compliance with DOT hours of service
Must be able to work well independently or with others in a team environment
Must be reliable, honest, and have a strong work ethic
Must have strong organizational and time management skills
Must be able to effectively communicate both verbally and in writing with customers and co-workers
Must be able to lift up to 75 lbs
Must own required tools

Job Responsibility

Demonstrate Modern Machinery's core values and promote the mission and vision of the company
Follow all company policies and regulations for safe work procedures and contribute to the achievement of company safety goals
Independently troubleshoot and repair all systems (electrical, hydraulic, A/C, power train, etc.) on Komatsu and other Modern Machinery affiliated product lines
Operate equipment as needed to assist in locating and diagnosing the failure
Utilize hand and power tools and electronic diagnostic equipment
Read and interpret complex hydraulic and electrical schematics
Perform diagnostic testing and tuning of equipment
Have the experience and ability to determine the extent of the repair and the corrective action required
Follow all safety rules and policies while performing all work assignments as specified in company handbooks
Adhere to any additional customer requirements, safety related and otherwise when working on a customer’s site

What we offer

Medical, Dental, Vision, and Prescription Insurance
401k/Roth Retirement Savings Plan with Company Match
Paid Time Off (Vacation, Sick, Holiday, and Bereavement)
Participation in Annual Incentive Plan (AIP)
Gym Membership Reimbursement Program
Family Scholarship Program
Employee Assistance Program
Company Paid Life Insurance
Company Paid Disability Benefits

Fulltime

Select Country

Heavy Equipment Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Heavy Equipment Technician

Heavy Equipment Technician

Heavy Equipment Technician

Instructor, Heavy Equipment Technician

Heavy Equipment Field Technician

Heavy Equipment Field Technician

Heavy Equipment Field Service Technician

Heavy Equipment Shop Service Technician

Heavy Equipment Field Service Technician

Our AI answers in your language