Harness Integration Technician Job at Figure (San Jose)

Harness Integration Technician

We are looking for a Wire Harness Technician. In this role, you will be highly f...

Location

United States , San Jose

Salary:

30.00 - 50.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2–5+ years building wire harnesses and cable assemblies in manufacturing or prototyping environments
Strong ability to independently design and execute custom cable builds for test and prototype use
Ability to read prints/schematics and follow work instructions with minimal supervision
Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax, twisted pair)
Hands-on experience with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Strong quality and schedule focus, with high first-pass yield and low rework in fast-iteration environments

Job Responsibility

Build build-to-print and custom wire harnesses, including cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, and final terminations
Create custom cables and harnesses on demand to support test setups, debugging, EVT/DVT activities, and rapid hardware iteration, often with evolving or incomplete requirements
Partner closely with engineering and test teams to quickly translate test needs into practical cable and harness solutions
Read and follow drawings, schematics, BOMs, work orders, and ECOs
record traceability in ERP/routers
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling
document pull tests when required
Print and apply labels and heat-shrink markers per print
Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMMs, cable testers, and fixtures
Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment

Fulltime

Structures Integration Technician

As a Structures Integration Technician, you will play a critical role in the han...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

3+ years of experience in aerospace, startup, or fast-paced prototyping/manufacturing environments
Demonstrated experience in both flight hardware assembly and production support, including system-level troubleshooting
Ability to work across a wide range of technical areas including fluids, inventory support, structural assembly, and manufacturing
Strong proficiency with engineering drawings, schematics, GD&T, and hands-on fabrication
Familiarity with shop tools, rigging, GSE, and component-level ATP/proof testing
Highly self-directed with a track record of working independently and taking initiative without constant oversight
Strong understanding and practice of 5S, lean manufacturing, and continuous improvement principles

Job Responsibility

Take full ownership of work orders, quality buyoffs, and material handling, including occasional support in inventory and materials control when needed
Execute a wide variety of mechanical and electromechanical sub-assemblies, as well as full system-level integration tasks with minimal instruction
Perform critical structural operations: drilling, reaming, countersinking, deburring, and installing precision fasteners per spec
Install, troubleshoot, and maintain fluid, pneumatic, and electromechanical systems, including leak checks, ATP, and light electrical harnessing
Provide cross-functional support across departments—whether that’s jumping in on a build, troubleshooting a test setup, or organizing work centers
Build and refine custom tooling and fixtures for one-off builds or repeatable operations, contributing to build readiness and safety
Deliver in-the-moment engineering feedback, and proactively redline work instructions or flag inefficiencies to continuously improve processes
Drive process improvement initiatives—applying your generalist lens to find cycle time reductions, streamline flows, and simplify complex tasks
Operate independently in a dynamic environment where priorities change rapidly
bring a flexible, "do what’s needed" mindset every day

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
Fully stocked breakrooms
Stock Options

Fulltime

Senior Fabrication and Integration Technician

ICEYE is looking for a Senior Fabrication and Integration Technician to join our...

Location

Spain , Valencia

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

5+ years of relevant experience as a composite manufacturing technician with a hands on approach
Hands-on experience in aircraft, robot, race car or similar system prototyping & manufacturing
Good systems and physics understanding
Basic knowledge of CAD tools
Experience developing process improvements and setups to improve cycle times, repeatability, and maturity
Good command of the English language, both oral and written

Job Responsibility

Assembly of a large, but very lightweight aircraft
Fabrication of lightweight aircraft structures/components
Development of new assembly, integration and testing processes, and tools for an ultra-light UAV
Manufacturing of electronics assemblies and sub-level components (such as cable harness manufacturing and battery manufacturing of state-of-the-art high power density batteries)
Design and assembly of electrical and mechanical test jigs to support R&D
Developing and executing test procedures
Transitioning new designs from engineering to manufacturing

What we offer

ICEYE offers amazing relocation packages to Valencia, Spain
A job that matters in a dynamic Earth Observation environment with a scale-up approach
An independent role with a supportive and diverse work environment
Time for self-development, research, training, conferences, or certification schemes
Health insurance
Coffee, snacks, and sweets to accompany your daily space mission
Creative, inspiring and collaborative office
Competitive salary contingent on your experience level, and will be negotiated individually

Fulltime

Satellite Production Technician, Integration

As a Satellite Production Technician, Integration at ICEYE, your mission is to t...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Ability to apply basic technical knowledge gained through a high school diploma or equivalent technical education
Proven competence in electro-mechanical or mechanical assembly/integration in a hands-on environment (typically 2+ years)
Strong manual dexterity and consistent attention to detail when working with small or precision components
Practical understanding of how mechanical and/or electrical systems work and interact
Ability to communicate clearly in English, both in writing and speaking, in a technical work environment

Job Responsibility

Satellites are built to spec by correctly assembling mechanical subassemblies into fully integrated spacecraft
All wire harnesses are installed and integrated so that electrical systems function reliably in orbit
Mechanical and electrical ground support equipment is used safely and effectively to support smooth integration and testing
Work instructions and engineering drawings are followed precisely, resulting in first-time-right assemblies
All work is fully documented in the shop floor system, ensuring end-to-end traceability of every satellite
Satellite hardware is protected from damage and contamination through consistently careful handling in cleanroom and ESD-safe areas

What we offer

Occupational healthcare and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of your choice
Relocation support if needed (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus
A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission

Fulltime

Technician, Lv Wire Harness

The Technician, LV Wire Harness is responsible for assembling, testing, and insp...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

1–3 years of hands-on wiring or electrical assembly experience (automotive, aerospace, EV, industrial equipment, or similar)
Experience with generator sets, industrial equipment, or mobile power systems
Experience in pilot production, new product introduction (NPI), or R&D environments
IPC/WHMA-A-620 certification (Class 2 or Class 3) preferred
Basic soldering experience
Ability to read and interpret wiring diagrams, schematics, pinouts, and cable lists
Proficiency in crimping, stripping, terminal installation, and wire routing
Familiarity with low-voltage wiring harness design and manufacturing
Experience using electrical test equipment (e.g., multimeter, continuity tester)
Strong attention to detail and quality-focused mindset

Job Responsibility

Assemble low-voltage wiring harnesses using drawings, schematics, and work instructions
Cut, strip, crimp, splice, and terminate wires using approved tools and methods
Install connectors, terminals, boots, heat shrink, grommets, and labels per specifications
Route and bundle wiring using loom, braid, sleeving, clamps, and tie wraps following best practices
Support integration of harnesses into genset subassemblies as needed
Perform continuity, polarity, and basic functional testing on completed harnesses
Inspect crimps, terminals, pin retention, and insulation for quality and compliance
Verify wire colors, gauges, lengths, and connector orientation
Document defects and collaborate with quality teams to resolve nonconformances
Execute builds using job travelers, schematics, harness drawings, and bills of materials (BOMs)

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

New

Electrical/Mechanical Integration Field Engineer

Amentum is seeking a motivated and technically capable Electrical/Mechanical Int...

Location

United States , China Lake

Salary:

75000.00 - 108000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in a STEM discipline preferred, with emphasis in Electrical Engineering, Electrical Engineering Technology, Systems Engineering, Mechanical Engineering, Physics, Applied Science, or a related technical field. Equivalent hands-on technical experience may be considered in lieu of degree
Minimum 2 years of hands-on field engineering, electrical troubleshooting, instrumentation, test, maintenance, installation, or hardware-integration experience in a relevant technical environment
Must be able to obtain and maintain a US Government Secret Clearance. Please note US Citizenship is required to obtain a Secret Clearance
Demonstrated experience troubleshooting electrical systems, low-voltage circuits, wiring harnesses, sensors, connectors, signal paths, grounding issues, continuity faults, intermittent failures, or instrumentation anomalies
Demonstrated ability to support hands-on mechanical integration tasks such as equipment installation, sensor mounting, bracket installation, enclosure installation, cable routing, hardware fit checks, and field modification support
Ability to read and interpret wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, technical specifications, and field work instructions
Proficiency with standard electrical test and measurement equipment, including multimeters, oscilloscopes, continuity testers, signal analyzers, data acquisition tools, or similar equipment
Working knowledge of low-voltage electrical systems, sensor interfaces, signal wiring, connectors, cable harnesses, termination practices, and basic fault-isolation techniques
Working familiarity with mechanical hardware installation practices, including fasteners, brackets, mounts, access constraints, cable management, strain relief, alignment, fit checks, and field redline documentation
Ability to document troubleshooting steps, field observations, discrepancies, test results, corrective actions, as-built conditions, and engineering recommendations clearly and accurately

Job Responsibility

Perform hands-on electrical installation, maintenance, troubleshooting, and repair of low-voltage systems, sensors, wiring harnesses, connectors, instrumentation, and associated field hardware
Support mechanical installation and integration activities involving brackets, panels, enclosures, equipment mounts, sensor mounts, cable supports, conduit, raceways, junction boxes, and related hardware
Interpret and work from wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, installation drawings, and field work instructions to support installation, verification, and fault isolation
Conduct electrical and mechanical inspections to verify that installed hardware conforms to design intent, drawing requirements, interface requirements, safety standards, and field installation constraints
Troubleshoot complex low-voltage circuits, signal paths, sensor networks, grounding issues, connector issues, intermittent faults, and instrumentation anomalies using appropriate test equipment including multimeters, oscilloscopes, continuity testers, signal analyzers, and data acquisition tools
Assist with fit checks, alignment checks, hardware walkdowns, cable-routing assessments, connector-access evaluations, and field verification of mechanical and electrical interfaces
Identify and resolve electrical, mechanical, and integration-related issues in the field using sound engineering judgment and disciplined problem-solving methodology
Document field observations, discrepancies, corrective actions, redlines, as-built conditions, test results, and recommended engineering updates accurately and thoroughly in accordance with program requirements
Participate in the development, review, and approval of electrical schematics, wiring diagrams, harness drawings, mechanical installation drawings, interface drawings, and technical specifications
Support design change processes by evaluating proposed electrical and mechanical modifications for technical feasibility, fit, form, function, signal integrity, safety, maintainability, and compliance with applicable standards

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Electronics Technician

Electronics Technician (Glasgow, Scotland) - Our client is an innovative technol...

Location

United Kingdom , Glasgow

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

Higher National Certificate (HNC), National Diploma, or equivalent qualification in Electronic Engineering or a related discipline
3-5 years of hands-on experience working with electronic systems and components
Working knowledge of embedded systems, including microcontrollers and IoT devices
Experience in a laboratory or production environment conducting testing and evaluation of electronic systems
Proficiency in using diagnostic equipment for testing and fault finding
Experience assembling and integrating electronic and mechanical systems
Strong skills in harness assembly, mechanical assembly, and electronics assembly
Experience maintaining and repairing electronic systems and laboratory equipment
Ability to maintain detailed technical records and produce reports
Experience working in a cleanroom-rated environment is highly desirable

Job Responsibility

Collaboration and Support
Harness Assembly
Mechanical Assembly
Electronics Assembly
Cleaning and Bonding
Integration and Testing
Production Documentation
Maintenance and Repair
Inventory Management
Safety and Compliance

What we offer

Opportunity to work within the rapidly growing space and advanced technology sector
Exposure to cutting-edge technologies and innovative engineering projects
Competitive salary and benefits package
Collaborative and supportive working environment
Career development opportunities within a highly specialised field

Fulltime

Electronics Technician

We’re working with a well-established UK manufacturer with over 30 years’ experi...

Location

United Kingdom , Lincolnshire

Salary:

35000.00 GBP / Year

Zenovo

Expiration Date

Until further notice

Requirements

Qualified to HNC/HND/BTEC Level 4 (or higher) in a STEM-related discipline
Hands-on experience with PCBs, soldering/rework, cable harness assembly, and fault finding
Strong analytical mindset with the ability to quickly learn new technologies
Interest in IoT systems and device-to-cloud communication
Competent with Microsoft Office tools (Word, Excel, Outlook)
Organisational skills with the ability to manage multiple tasks and priorities

Job Responsibility

Build and assemble prototypes, test rigs, harnesses, and jigs to support validation activities
Carry out environmental, EMC, and ESD testing on products
Perform functional testing of software and associated applications
Accurately record and report test results to the design engineering team
Process RMA returns, including fault diagnosis, categorisation, repair, and documentation
Rework failed units from end-of-line (EOL) testing
Support integration testing between hardware devices and backend systems
Liaise with suppliers to define specifications and technical documentation for outsourced test equipment

Fulltime

Select Country

Harness Integration Technician

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Harness Integration Technician

Harness Integration Technician

Structures Integration Technician

Senior Fabrication and Integration Technician

Satellite Production Technician, Integration

Technician, Lv Wire Harness

Electrical/Mechanical Integration Field Engineer

Electronics Technician

Electronics Technician

Our AI answers in your language