Floor Technician Jobs

Floor Technician

The Floor Technician is responsible for floor maintenance, restoration, and the ...

Location

United States , Boulder

Salary:

20.42 - 25.00 USD / Hour

Aramark

Expiration Date

Until further notice

Requirements

Previous experience as a floor care technician or in related role and knowledge of floor care equipment and use is preferred
Must be able to read and write to facilitate proper communication with others
Must be able to perform simple mathematical calculations

Job Responsibility

Maintains a friendly, efficient, and positive customer service attitude toward customers, clients, and co-workers
Anticipates and responds to customer needs
Uses proper procedures on hard floor care (stripping & refinishing, burnishing, spray cleaning, and spray buffing) in adherence to the principles of hard surface floor maintenance
Uses the proper procedures on carpet and upholstering (shampooing, damp surface, extractions, spot cleaning, vacuuming, etc.)
Operates industrial floor care equipment as assigned and according to schedule for cleaning of large area of floor surface
Performs maintenance and restorative processes for all floor surface types
Properly processes all municipal solid waste (MSW), infectious, and pharmaceutical waste including rendering infectious waste as MSW
Removes trash, recyclables, soiled linen, used supplies and equipment from assigned work area
Disinfects receptacles and carts as needed
Follows all Aramark safety standards, sanitation, and infection control standards and procedures and requirements by the appropriate accredited local agencies

What we offer

medical
dental
vision
work/life resources
retirement savings plans like 401(k)
paid days off such as parental leave and disability coverage

Fulltime

Floor Technician

The Floor Technician is responsible for floor maintenance, restoration, and the ...

Location

United States , Temple

Salary:

Not provided

Aramark

Expiration Date

Until further notice

Requirements

Previous experience as a floor care technician or in related role and knowledge of floor care equipment and use is preferred
Must be able to read and write to facilitate proper communication with others and be able to perform simple mathematical calculations

Job Responsibility

Maintains a friendly, efficient, and positive customer service attitude toward customers, clients, and co-workers
Anticipates and responds to customer needs
Uses proper procedures on hard floor care (stripping & refinishing, burnishing, spray cleaning, and spray buffing) in adherence to the principles of hard surface floor maintenance
Uses the proper procedures on carpet and upholstering (shampooing, damp surface, extractions, spot cleaning, vacuuming, etc.)
Operates industrial floor care equipment as assigned and according to schedule for cleaning of large area of floor surface
Performs maintenance and restorative processes for all floor surface types
Properly processes all municipal solid waste (MSW), infectious, and pharmaceutical waste including rendering infectious waste as MSW
Removes trash, recyclables, soiled linen, used supplies and equipment from assigned work area. Disinfects receptacles and carts as needed
Follows all Aramark safety standards, sanitation, and infection control standards and procedures and requirements by the appropriate accredited local agencies
Adheres to all Aramark appearance standards and always wears the required uniform and personal protective equipment (PPE) while working

Fulltime

Cleaner/Floor Cleaning Technician

This position is responsible for cleaning, maintaining, and repairing carpeted a...

Location

United States , Millersville

Salary:

16.50 USD / Hour

ServiceMaster by Prince

Expiration Date

Until further notice

Requirements

Constant (up to 100%) standing, walking, pushing, kneeling, twisting, reaching
Must be able to lift and/or carry up to 55lbs.
Minimum 1-2 years’ experience as a floor tech is highly desired but not required
Will provide on the job training to those with strong work ethic and willingness to learn.
The ability to be flexible and work at a fast pace in a multi-tasked job is a must.
Contribute to the overall team effort including being in uniform, dependable and on time

Job Responsibility

Perform all floor cleaning and maintenance duties for facilities using ServiceMaster provided tools and procedures
Duties include: sweeping, mopping, polishing, vacuuming, shampoo carpets, stripping, waxing, buffing. moving furniture, spot cleaning
Must achieve thorough understanding of buffing, stripping floors , waxing, and identifying different flooring types.
Ability to operate various floor equipment and machinery
Maintain inventory of supplies and equipment.

What we offer

Free uniforms
Training & development
Opportunity for advancement
Competitive Pay
Flexible Schedules
Career Path Opportunities
Paid Training
Paid training
excellent work/life balance and opportunities for advancement and a career path that matches your interests and goals.

Fulltime

Maintenance Technician - HVAC

The HVAC Technician, Maintenance - Manufacturing contributes to the mission of s...

Location

United States , Marion

Salary:

48000.00 - 66000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
must be at least 18 years of age
the ability to get universal HVAC certification within 6 months of taking the position
minimum of 5 years of mechanical systems repair, industrial maintenance or equivalent
must have basic English written and oral communication skills adequate to communicate with other team members
understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
must be able to perform basic mathematics
basic computer skills required
well organized
self-motivated to achieve goals and require little supervision

Job Responsibility

Directly supports PMT, TPM, and energy reduction activities through team membership, innovative thinking, and completion of assigned projects
coordinate with engineering and perform equipment modifications to include the required change control documentation (CMR/EWR)
involved in safety solutions
act as a resource in B-4 mechanic and manufacturing operator skill training
understand the use of predictive maintenance tools - develop opportunities to use predictive tools by attending training and then training others in Laser Alignment - Vibration Analysis – Infrared – Ultrasonic
develop tools (jigs) for standard equipment checks
preventative maintenance generation and/or refinement of existing PMs
analyze machine failures for root cause and implement corrective actions
assist in annual inspections
monitor parts spending and reliability trends

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
comprehensive health and well-being benefits starting on day one including insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
paid holidays

Fulltime

Maintenance Technician - HVAC

The HVAC Technician, Maintenance - Manufacturing contributes to the mission of s...

Location

United States , Marion

Salary:

48000.00 - 66000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
The ability to get universal HVAC certification within 6 months of taking the position
Minimum of 5 years of mechanical systems repair, industrial maintenance or equivalent is required
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Basic computer skills required
Well organized
Self-motivated to achieve goals and require little supervision

Job Responsibility

Directly supports PMT, TPM, and energy reduction activities through team membership, innovative thinking, and completion of assigned projects
Coordinate with Engineering and perform equipment modifications to include the required change control documentation (CMR/EWR)
Involved in safety solutions
Act as a resource in B-4 mechanic and manufacturing operator skill training
Understand the use of predictive maintenance tools - Develop opportunities to use predictive tools by attending training and then training others in Laser Alignment - Vibration Analysis – Infrared – Ultrasonic
Develop tools (jigs) for standard equipment checks
Preventative Maintenance generation and or refinement of existing PMs
Analyze machine failures for root cause and implement corrective actions
Assist in annual inspections
Monitor parts spending and reliability trends

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Employee Assistance Program
Flexible Spending Accounts
Life and accident insurance
Business travel accident insurance

Fulltime

Technologist

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States of America , Cleveland

Salary:

64000.00 - 88000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Associates Degree in a technical related field (i.e. Industrial Maintenance) is preferred
Minimum of 5 years of mechanical systems repair, industrial maintenance or equivalent is required
Must be at least 18 years of age
The position requires the ability to individually lift and carry up to 50 pounds
Must be able to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Normal visual acuity is necessary including the ability to distinguish colors
Due to the nature of this position, the ability to work most holidays, some weekends and plant shut down periods is required

Job Responsibility

Coordinate with Engineering and perform equipment modifications to include the required change control documentation (SR)
Involved in safety solutions
Understand the use of predictive maintenance tools - Develop opportunities to use predictive tools
Develop tools (jigs) for standard equipment checks
Preventive Maintenance generation and or refinement of existing PMs
Analyze machine failures for root cause and implement corrective actions
Assist in annual equipment inspections
Monitor parts spending and reliability trends
Utilize a laptop to communicate with PLCs, VFD’s, Panelview’s and Servos to diagnose issues
Use a drawing package, multi-meter and other diagnostic equipment to resolve electrical issues

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Supervisor, Composite Fabrication & Assembly

Lead a team of skilled technicians responsible for the fabrication, assembly, in...

Location

United States , Santa Clara

Salary:

122880.00 - 153600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

7+ years of experience in composite fabrication, modification, and repair, preferably in an aerospace manufacturing environment
Demonstrated hands-on expertise with composite layup processes (pre-preg and wet lay), secondary bonding, scarfing, drilling, and structural repairs
Strong working knowledge of composite materials, resins, fibers, and curing processes
Experience reading and interpreting engineering drawings, MBD (Model-Based Definition), and 3D CAD data (e.g., CATIA, NX, SolidWorks)
Proven leadership, communication, and conflict-resolution skills
Strong organizational skills with the ability to make sound decisions in a fast-paced, evolving environment
Familiarity with FAA regulatory requirements and aerospace documentation practices
Ability to work in a manufacturing environment, including confined spaces, and lift up to 50 lbs.

Job Responsibility

Stay current with advancements in composite materials, manufacturing methods, and repair technologies, applying best practices on the shop floor
Supervise and coordinate the work of composite technicians to ensure efficient execution of production, modification, and repair activities
Serve as the technical point of contact for composite processes, providing guidance on material selection, secondary bonding, structural fastening, modifications, and repair procedures
Ensure compliance with engineering specifications, manufacturing standards, and applicable aerospace regulations
Review and interpret engineering drawings, CAD models, and work instructions, ensuring technicians understand requirements and execute work accurately
Partner closely with engineering, quality, and manufacturing teams to resolve production challenges, implement process improvements, and escalate technical issues as needed
Monitor the use and condition of equipment and tooling, including ovens, vacuum systems, and fixtures, ensuring operational readiness and adherence to maintenance schedules
Support training and upskilling initiatives for technicians in composite fabrication, bonding, repair, and inspection techniques
Enforce safety protocols for hazardous materials handling and ensure safe work practices across all composite operations
Track work progress, maintain accurate documentation, and report on key metrics related to schedule, quality, and deliverables

Fulltime

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...

Location

United States , Batesville, Indiana

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Floor Technician

Aramark

Location:
United States , Owensboro

Category:
Physical Work

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 28, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Floor Technician

Floor Technician

Floor Technician

Cleaner/Floor Cleaning Technician

Maintenance Technician - HVAC

Maintenance Technician - HVAC

Technologist

Supervisor, Composite Fabrication & Assembly

Senior Engineer, Weld Manufacturing

Floor Technician

Aramark

Location:United States , Owensboro

Category:Physical Work

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 28, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Floor Technician

Floor Technician

Floor Technician

Cleaner/Floor Cleaning Technician

Maintenance Technician - HVAC

Maintenance Technician - HVAC

Technologist

Supervisor, Composite Fabrication & Assembly

Senior Engineer, Weld Manufacturing

Location:
United States , Owensboro

Category:
Physical Work

Contract Type:
Not provided

Job Posted:
December 28, 2025