Flight Assurance Associate Manufacturing Engineer Job at Piper Companies (Midland)

Manufacturing Technician III

We have a current opportunity for Contractor - Manufacturing Technician III for ...

Location

United States , Goleta

Salary:

32.00 - 35.00 USD / Hour

Redwire Space

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent plus advanced training
At least 5 plus years prior experience working in an Aerospace manufacturing setting in a similar position
Strong mechanical aptitude, good fabrications skills and general shop experience
Intermediate computer skills including Microsoft Office 365
Must be able to work Mon-Fri, occasional weekends to meet shipping dates and some late days
Ability to stand
walk
and use hands to finger, handle, or feel objects, tools, or controls
Ability to reach with hands and arms
Ability to lift and/or move up to 50 pounds

Job Responsibility

Fabrication and validation of critical flight hardware, including mechanical assembly, electrical assembly, and flight Ground Support Equipment
per associated flight drawings, procedures, quality standards and internal training
Assist engineers in flight / prototype hardware manufacture / test infrastructure development, documentation of assembly, test procedures and other specified tasks
Identify and communicate non-conformances to engineering and quality assurance
Work with facilities and maintenance to ensure that production equipment is maintained and repaired in a timely manner
Work with manufacturing engineering to optimize manufacturing orders and ensure process instructions are understood.

What we offer

Highly competitive benefits package

Fulltime

Aircraft Mechanic I Airframe

Aircraft Mechanic 1 will perform daily Scheduled and unscheduled maintenance to ...

Location

United States , San Diego

Salary:

44.18 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Minimum of three (3) years actual and recent O level H-60S/R Aircraft Maintenance experience or equivalent rotary aircraft experience as a rated Aircraft Structural Mechanic (AM)
Minimum of three (3) years actual H60 CDQAR/QAR experience
Must be able to obtain and maintain all required qualifications and complete all Personal qualification standards within the allotted time as per site instructions
Must be able to obtain and maintain Tire & Wheel and Hydraulic Contamination certification
May be able to obtain and maintain Plane Captain qualification
Must be able to work all shifts
Ability to read and write and interpret technical data and special operating instructions is required
An in-depth knowledge of the applicable aircraft is required
A thorough working knowledge of applicable technical publication is required

Job Responsibility

Repairs, replaces, and rebuilds aircraft structures, such as blades and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Reads and interprets manufacturers and maintenance manuals, OPNAV 4790, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Performs 200-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked turbine blades and oil leaks, inspects turbine engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments
Inspects engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, to locate source of malfunction
Replacing or repairing worn or damaged components, such as generators, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment
removing engine from aircraft, using hoist or crane, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft
Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing gearbox, cleaning screens and filters, greasing moving parts, checking brakes and corrosion prevention of aircraft
Supervise and participate in the jacking and towing of aircraft, enters in the maintenance records description of all work performed including safety of flight items and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair
Housekeeping of all areas of work including shop
participate in FOD program

What we offer

medical insurance
dental insurance
vision insurance
401(k) retirement plan
life insurance
long-term disability insurance
short-term disability insurance
5.54 hours of paid time off biweekly
11 paid holidays annually
$8.00 per hour, up to 40 hours per week, for Health and Welfare

Fulltime

Manufacturing Technician III

We have a current opportunity for Contractor - Manufacturing Technician III for ...

Location

United States , Goleta

Salary:

32.00 - 35.00 USD / Hour

Redwire Space

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent plus advanced training
At least 5 plus years prior experience working in an Aerospace manufacturing setting in a similar position
Strong mechanical aptitude, good fabrications skills and general shop experience
Intermediate computer skills including Microsoft Office 365
Must be able to work Mon-Fri, occasional weekends to meet shipping dates and some late days
Ability to stand
walk
and use hands to finger, handle, or feel objects, tools, or controls
Ability to reach with hands and arms
Ability to lift and/or move up to 50 pounds

Job Responsibility

Fabrication and validation of critical flight hardware, including mechanical assembly, electrical assembly, and flight Ground Support Equipment
per associated flight drawings, procedures, quality standards and internal training
Assist engineers in flight / prototype hardware manufacture / test infrastructure development, documentation of assembly, test procedures and other specified tasks
Identify and communicate non-conformances to engineering and quality assurance
Work with facilities and maintenance to ensure that production equipment is maintained and repaired in a timely manner
Work with manufacturing engineering to optimize manufacturing orders and ensure process instructions are understood

Fulltime

General Acquisition Program Manager – Global Hawk (Dayton)

Candidate will provide General Acquisition Program Management Support.

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

Bachelor’s Degree and 12 years of experience
Must have a Secret Clearance
U.S. Citizenship is required

Job Responsibility

Perform the various acquisition management duties common to all organizations to support the mission
Manage and monitor their assigned program to include program of record changes, cost/schedule/performance issues, risks, and contract status
Assist in the planning, organization, activation, and control of the Comprehensive Cost and Requirements (CCaR) management system to assure proper identification of supporting financial and budget line items, funds loading and establishment of appropriate tracking tools/management products to monitor and report overall schedule and budget baseline performance
Assist to activate and monitor the various project Purchase Request (PR) funding loads within Comprehensive Cost and Requirements (CCaR)
Apply an understanding of defense acquisition program management to manage and maintain the Integrated Master Plans/Integrated Master Schedules (IMP/IMS), earned value measurement metrics management system, and the USAF Comprehensive Cost and Requirements (CCaR) financial planning tool
Assist with planning, organization, and control of all production and Engineering and Manufacturing Development (EMD)/capabilities master schedules, testing schedules, program’s weapon system prime/subcontractor schedules, and identification/resolution of variances in weapon system contractor performance
Prepare and present briefs covering system schedules, cost controls, and Earned Value Management (EVM) metrics
Apply knowledge and experience to manage and monitor the prime contractor’s efforts to design, develop, test and field Engineering Change Proposals (ECP) applying to the airframe or legacy ground station
monitor efforts to integrate sensors into the air vehicle or ground stations, software integration lab activities, testing, ground and flight regression and developmental testing, operational test configuration certification, operational test execution and reporting and fielding support
Assist in writing and developing contract Statement of Work (SOW) documents and Contract Data Requirements Listing (CDRLs) and participate in contract proposal technical evaluations designed to govern the international project procurement

Fulltime

Aircraft Mechanic I, Airframe

Location

United States , Virginia Beach

Salary:

37.57 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Shift work is required and detachments are possible
Must be a High School graduate or equivalent
Minimum five (5) years of actual and recent organizational-level F/A-18 A-G aircraft maintenance experience
Minimum three (3) years prior F/A-18 A-G Collateral Duty Inspector/Quality Assurance Representative experience or FAA A&P License
Must have completed Navy Aviation Structural Mechanics AM 'A' School or FAA A&P License
Must obtain Collateral Duty Inspector qualification within 30 days of promotion/hire date
Knowledge and use of special tools/equipment required to perform assigned maintenance tasks is mandatory
Any additional qualifications or license required to maintain aircraft
Must be physically able to perform all assigned duties
Must have a valid Virginia or North Carolina Driver license (if North Carolina resident)

Job Responsibility

Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems
Repairs, replaces, and rebuilds aircraft structures
Reads and interprets manufacturers' and airline's maintenance manuals
Performs progressive, phase, periodic, and other hourly, conditional or calendar inspections
Inspects reciprocating engines
Inspects jet engines and components
Tests engine operation
Replaces or repairs worn or damaged components
Removes engine from aircraft
Adjusts, repairs, or replaces electrical wiring system and aircraft accessories

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Aircraft Quality Control Inspector

The Aircraft Quality Control Inspector is responsible for ensuring that assigned...

Location

United States , Conroe

Salary:

50.60 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Must be able to obtain and maintain a CBP Background Investigation Suitability clearance
US Citizenship is required to obtain the clearance
High School Diploma or equivalent is required
Five (5) years of aircraft maintenance experience
Valid Airframe and Power Plant (A&P) License required
Valid FAA Inspection Authorization (IA) required
Ability to obtain a government flight line driver’s license
Possess a valid United States driver's license
Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule
Ability to read and interpret data is required

Job Responsibility

Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems
Apply technical knowledge and expertise in determining proper equipment installation and operation
Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures’ manuals
Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts
Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components
Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data
Review and approve locally developed procedures and solutions to complex repair situations
Perform analysis of defects and interprets quality control rejection and failure trends
Monitor safety, training, and certification requirements
Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections

Fulltime

Aerostructures supply quality manager

ATR is looking for an Aerostructures Supply Quality Manager to come onboard in o...

Location

France , Toulouse Area

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Field of study: Quality, Operations, Continuous improvement or engineering
Experience: 5 to 10 years in aerospace industry, quality standard, supply chain, plant, FAL
Technical skills/knowledge: standards for auditing supplier's quality (EN_19011)
EN9100, PART 21G, PART 21J
aircraft design and manufacturing & assembly processes
aeronautical mechanical and structure knowledge (Wing, Fuselage, HTP, VTP)
Problem Solving method (9S, 8D, 5WHY, ISHIKAWA…)
project management
Fluent in English and French (Italian is a plus)
Availability and flexibility for travelling

Job Responsibility

Secure on-quality deliveries
Develop quality Key Indicators Performance to monitor on-quality performance and implement associated action plan to improve quality
Define Partners surveillance plan covering design and production scope
Plan and conduct product and process related audits/assessments
Manage First Article Inspection (FAI) for New Product Introduction (NPI) and for series modifications
To perform industrial audits and/or assessments (IPCA+ like) for high risk Suppliers
In coordination with FAL and/or Aftermarket Supply Chain teams, develop a common action plan when there are important poor on-quality and on-time delivery performance from Partners
Contribute to Partner’s quality improvement to meet ATR requirements
Ensure customer satisfaction taking into account flight safety, cost control, production flow and supply risk management
Lead quality investigation within the Production & Customer Support & Services depts., ensure completion of the investigation and verify effectiveness of the solution in the field

What we offer

Highly competitive compensation package (profit and success sharing, employee savings plan…)
Work-life balance (remote working, 6th week of paid leave, additional days off for family events…)
Well-being / health (supplementary health & welfare coverage…)
Career paths enabling employees to develop their skills and build a professional project
Wide choice of development programs for soft and hard skills
CSE: ATR (family and employee events) and Airbus CSE (travel, vacation camps …)

Fulltime

Aircraft Quality Control Inspector

The Aircraft Quality Control Inspector is responsible for ensuring that assigned...

Location

United States , Manassas

Salary:

126880.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Must be able to obtain and maintain a CBP Background Investigation Suitability clearance
US Citizenship is required to obtain the clearance
High School Diploma or equivalent is required
Five (5) years of aircraft maintenance experience
Valid Airframe and Power Plant (A&P) License required
Valid FAA Inspection Authorization (IA) required
Possess a valid United States driver's license
Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule
Ability to read and interpret data is required
Ability to read, write, speak and understand English

Job Responsibility

Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems
Apply technical knowledge and expertise in determining proper equipment installation and operation
Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as
blueprints or manufactures’ manuals
Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts
Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components
Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data
Review and approve locally developed procedures and solutions to complex repair situations
Perform analysis of defects and interprets quality control rejection and failure trends
Monitor safety, training, and certification requirements

What we offer

competitive benefits package

Fulltime

Select Country

Flight Assurance Associate Manufacturing Engineer

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?