Flight Assembly Technician Job at Surrey Satellite Technology Limited (Guildford)

Propulsion Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

May 29, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Weld, assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Integration Engineer – Structures & Assembly

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build...

Location

United States , Los Angeles

Salary:

105750.00 - 169625.00 USD / Year

Hermeus

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related technical discipline
3+ years of experience in aerospace or high-performance structural assembly, integration, or manufacturing
Deep understanding of aerospace assembly best practices and structural integration principles
Exposure to tolerance stack-up analysis, structural proof testing, drilling and fastening operations, and leak or pressurization checks
Proficient in CAD, GD&T, and first-principles engineering analysis
Strong communicator capable of interfacing across design, manufacturing, test, and supply chain functions
Proven ability to operate autonomously and define new processes from the ground up in a fast-moving environment
Must be willing to work hands-on in the integration area and around heavy equipment on a daily basis
Ability to lift up to 25 lbs and perform physically active work as required
Occasional extended hours or weekend work may be required to support key program milestones

Job Responsibility

Provide design feedback for manufacturability, assembly, testing, and transport of complex flight structures
Establish and maintain build roadmaps for assigned assemblies, ensuring cross-functional alignment, on-time hardware delivery, and proactive issue resolution
Develop and release build CONOPS, work instructions, standard procedures, and process documentation that enable high-quality, high-speed execution
Support first-article and development builds in a fast-paced, early-stage environment
work hands-on with technicians to validate tooling, processes, and design intent
Drive design, process, and capital equipment trades to enable future builds and contribute to scalable manufacturing systems and infrastructure
Lead make-vs-buy assessments and collaborate with Engineering and Supply Chain to achieve optimal cost, schedule, and performance outcomes
Provide hands-on floor support during structural assembly, integration, and test activities
Champion continuous improvement across tooling, factory workflows (ERP/MES), and internal standards to increase build efficiency, repeatability, and quality

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
End of Year Bonuses
Fully stocked breakrooms
Stock Options
Paid Parental Leave

Fulltime

AIT Technician

As AIT Technician, you will join us on the arctic island of Andøya, and – as par...

Location

Norway , Andenes

Salary:

Not provided

Isar Aerospace

Expiration Date

Until further notice

Requirements

Completed vocational training as an aircraft mechanic specializing in production engineering, maintenance, engineering or comparable training in accordance with the requirements
Several years of professional experience in the field of aviation and/or aerospace
Excellent teamwork
Knowledge of gas/fluid bolting techniques
Good drawing skills, spatial awareness and good technical understanding
Willingness for occasional assembly work at different locations
High attention to detail and quality
Ability to work under pressure and in a highly dynamic environment
Foundational knowledge of computer and software applications
Well organized mode of working

Job Responsibility

Shaping the launch site: Continuously improve the AIT infrastructure, and help develop it to compete with world class AIT facilities around the globe
High-Precision Assembly: Precise assembly of advanced space components
Machining Carbon Fiber Composites: Working with cutting-edge carbon fibre materials
Component and Assembly Testing: Validating the functionality of individual parts and complete assemblies
Test and Launch Support: Assisting in setting up and preparing the flight hardware for stage testing and launch
High Cleanliness Standards: Maintaining high cleanliness standards to ensure component integrity
Detailed Documentation: Accurately documenting work processes to maintain high standards and quality
Compliance with Standards: Ensuring adherence to industry standards and regulations
Process Improvement: Contributing to continuous process improvement

What we offer

Employee Participation Program: Share in our success through our virtual company share program
6 weeks of vacation: Enjoy the days off to relax and recharge
Subsidised lunch: Stay energised with delicious, subsidised lunches every day
Relocation support: Benefit from our relocation bonus with deductible expenses up to an agreed amount
Wellness allowance: Stay healthy and fit with our yearly allowance for wellness activities (e.g., Gym, Massages)
Individual learning allowance: Grow your skills with an individual learning budget granted after the probation period
Physical and mental well-being: Access via OpenUp the online support from certified psychologists and lifestyle experts at no cost to you and your family

Fulltime

A320 Ground Test Inspector (avionics)

Airbus US Manufacturing Facility is looking for a Ground test inspector to join ...

Location

United States , Mobile Area, AL

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Minimum High School Diploma or GED
Minimum 5+ years preferably as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred) or experienced Quality Inspector in avionics systems in international aviation
Minimum 3+ years of experience in troubleshooting on aircraft systems
Experience in A320 Family type rating is beneficial
Physical Requirements: Vision: adequate to enter and read material on computer screens
Hearing: able to hear sufficiently to engage in conversation in office settings
Speaking: able to engage in conversations in person and via electronic means
Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms
Carrying: able to occasionally carry up to 20lbs/9kg
Lifting: able to occasionally lift up to 30lbs/14kg

Job Responsibility

Perform ground tests
Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems, in a safe environment
Perform function tests on all systems (flight controls, navigation, passenger entertainment, etc.) in parallel to the assembly of the aircraft from beginning to Flight Testing
Organize documentation of any non-conformity in the SAP NC system and initiate associated retests (Repeat Test Instruction) after finalization of rework
Perform troubleshooting (T/S) on test systems and on aircraft systems
Prepare and coordinate troubleshooting and distinguish error types
Clarify problems with the engineering department
Support improvement measures
Identify problems internally in order to continuously improve the 'On Time On Quality' production process
Other duties as assigned

What we offer

Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (ESOP)
Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program
Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (EAP) and other supplemental benefit coverages
Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility

Fulltime

Vehicle Integration Technician

The Vehicle Integration Technician is responsible for the integration of all sec...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
2+ years of professional propulsion, mechanical, automotive, electrical or avionics hardware installation experience
Experience in the aerospace industry, aviation, military or other high-reliability operating environment
Knowledge of pressure, temperature and flow measurement devices, mechanical and electrical systems, and propulsion engines
Skill in operating and manipulating machinery and various hand and power tools requiring manual dexterity
Ability to lift at least 25 lbs unassisted
Willing to travel up to 25%
Ability to climb ladders and work in confined spaces
Willing to work all shifts, overtime, and weekends as needed

Job Responsibility

Stage, set up, assemble, test and install flight hardware
Use precision calibrated tools
Hands on operations with both large and small fragile assemblies
Heavy rigging for large assemblies
Operate personnel platforms (boom lifts, scissor lifts, etc.)
Read and interpret engineering drawings and work instructions
Perform work according to procedures, specifications, and test instructions
Use various mechanical tools without prior instruction
Collaborate with production engineers to develop and document integration processes
Ensure all production services are performed on time, safely and in a professional manner

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
Fully stocked breakrooms
Stock Options
Flexible PTO (exempt) and generous accrued PTO (non-exempt), plus 12 federal holidays off

Fulltime

Structures Integration Technician

As a Structures Integration Technician, you will play a critical role in the han...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

3+ years of experience in aerospace, startup, or fast-paced prototyping/manufacturing environments
Demonstrated experience in both flight hardware assembly and production support, including system-level troubleshooting
Ability to work across a wide range of technical areas including fluids, inventory support, structural assembly, and manufacturing
Strong proficiency with engineering drawings, schematics, GD&T, and hands-on fabrication
Familiarity with shop tools, rigging, GSE, and component-level ATP/proof testing
Highly self-directed with a track record of working independently and taking initiative without constant oversight
Strong understanding and practice of 5S, lean manufacturing, and continuous improvement principles

Job Responsibility

Take full ownership of work orders, quality buyoffs, and material handling, including occasional support in inventory and materials control when needed
Execute a wide variety of mechanical and electromechanical sub-assemblies, as well as full system-level integration tasks with minimal instruction
Perform critical structural operations: drilling, reaming, countersinking, deburring, and installing precision fasteners per spec
Install, troubleshoot, and maintain fluid, pneumatic, and electromechanical systems, including leak checks, ATP, and light electrical harnessing
Provide cross-functional support across departments—whether that’s jumping in on a build, troubleshooting a test setup, or organizing work centers
Build and refine custom tooling and fixtures for one-off builds or repeatable operations, contributing to build readiness and safety
Deliver in-the-moment engineering feedback, and proactively redline work instructions or flag inefficiencies to continuously improve processes
Drive process improvement initiatives—applying your generalist lens to find cycle time reductions, streamline flows, and simplify complex tasks
Operate independently in a dynamic environment where priorities change rapidly
bring a flexible, "do what’s needed" mindset every day

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
Fully stocked breakrooms
Stock Options

Fulltime

Structures Manufacturing Engineer

As a Structures Manufacturing Engineer – Tooling & R&D at Hermeus, you will enab...

Location

United States , Los Angeles

Salary:

Not provided

Hermeus

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Mechanical, Aerospace, Manufacturing, or related engineering discipline
Strong engineering fundamentals and comfort applying first principles in ambiguous environments
Hands-on experience with physical hardware
Proven ability to design, build, test, break, and iterate rapidly
Proficiency with CAD and familiarity with GD&T fundamentals
Comfort using hand tools, test equipment, and working directly on the shop floor
Familiarity with manufacturing processes such as machining, welding, forming, and assembly
Strong communication skills and ability to collaborate across multidisciplinary R&D teams
Willingness to work flexible hours, including overtime and weekends as needed

Job Responsibility

Own the design, fabrication, and validation of tooling, fixtures, and ground support equipment supporting structural prototype builds, integration, and testing
Rapidly iterate tooling concepts to support changing designs, test objectives, and build sequences
Partner with structures, manufacturing, and test engineers to define integration flow, tooling interfaces, and build strategies
Perform mechanical checks, fit-ups, and hands-on trials to qualify tooling for development and flight hardware builds
Maintain configuration control, documentation, and safety standards across evolving tooling systems
Support the build, integration, and inspection of primary and secondary structural assemblies for the Quarterhorse vehicle and future platforms
Act as the primary interface between design engineers and technicians during prototype and flight hardware builds
Identify integration challenges early and develop creative tooling or process solutions to maintain build velocity
Provide direct, real-time design feedback based on hands-on build experience
Support structural testing campaigns by enabling efficient, repeatable, and safe hardware setups

Fulltime

Sheet Metal Shop Technician

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate required
technical training or trade certification in sheet metal fabrication preferred
3+ years of experience operating and maintaining machinery in a precision manufacturing or aerospace fabrication environment
Demonstrated ability to read and interpret technical drawings, blueprints, and work instructions
Strong mechanical aptitude and troubleshooting skills with attention to precision and quality
Proficient in the safe operation of sheet metal forming, cutting, and finishing equipment
Ability to work independently and take ownership of work from setup through inspection
Strong communication and teamwork skills
able to collaborate effectively with engineers, machinists, and other technicians
Physically capable of lifting up to 50 lbs, standing for extended periods, and working in varied physical positions (bending, kneeling, crawling)

Job Responsibility

Set up, operate, and maintain sheet metal fabrication equipment including laser cutters, press brakes, rollers, English wheels, shrinker-stretchers, and related forming tools
Read and interpret engineering drawings, blueprints, and flat patterns to ensure all fabricated components meet dimensional and quality requirements
Perform precision measurement and inspection using calipers, micrometers, height gauges, thread gauges, and radius gauges to verify conformance
Work closely with manufacturing and design engineers to develop and refine fabrication processes for complex, tight-tolerance flight hardware
Execute basic assembly operations, including drilling, riveting, and fastening of metallic structures
Perform preventive maintenance and troubleshooting on shop equipment to ensure peak performance and minimize downtime
Support and train operators on safe and efficient machine setup, operation, and best practices
Maintain a clean, organized, and safety-compliant workspace, supporting continuous improvement initiatives across the shop
Contribute feedback to improve work instructions, process documentation, and tooling designs

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
Fully stocked breakrooms
Stock Options

Fulltime

Flight Assembly Technician

Surrey Satellite Technology Limited

Location:
United Kingdom , Guildford

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Flight Assembly Technician

Propulsion Technician Senior

Integration Engineer – Structures & Assembly

AIT Technician

A320 Ground Test Inspector (avionics)

Vehicle Integration Technician

Structures Integration Technician

Structures Manufacturing Engineer

Sheet Metal Shop Technician

Flight Assembly Technician

Surrey Satellite Technology Limited

Location:United Kingdom , Guildford

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Flight Assembly Technician

Propulsion Technician Senior

Integration Engineer – Structures & Assembly

AIT Technician

A320 Ground Test Inspector (avionics)

Vehicle Integration Technician

Structures Integration Technician

Structures Manufacturing Engineer

Sheet Metal Shop Technician

Location:
United Kingdom , Guildford

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
March 03, 2026