Final Integration Technician Job at KP Staffing (Sugar Land)

Harness Integration Technician

Build production-quality wire harnesses from drawings/BOMs/work orders in a fast...

Location

United States , San Jose

Salary:

30.00 - 45.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2–5+ years building wire harnesses/cable assemblies in manufacturing or prototyping
Ability to read prints/schematics and follow work instructions with minimal supervision
Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax/twisted pair)
Hands-on with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Strong quality and schedule focus: high first-pass yield and low rework

Job Responsibility

Build build-to-print harnesses: cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, final terminations
Read and follow drawings, schematics, BOMs, work orders, and ECOs
record traceability in ERP/routers
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling
document pull tests when required
Print/apply labels and heat-shrink markers per print
Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMM/cable testers/fixtures
Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment
Maintain 5S/ESD and safety
suggest process and DFM improvements

Fulltime

Assembly Technician I

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Assembly Technician I (Cables)

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Soldering application, custom cable terminations
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Assembly Technician I

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Fond du Lac

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Sr. Electrical Engineer

Design electrical/electronic products for use in protection and control of power...

Location

United States , Highland

Salary:

96000.00 - 113000.00 USD / Year

Basler Electric

Expiration Date

Until further notice

Requirements

B.S.E.E. degree or equivalent
Minimum of five years’ electrical/electronic design experience
Able to work independently to successfully create electrical/electronic circuit designs
Able to clearly communicate, both verbally and in writing, with customers and various levels of personnel
Able to effectively use engineering design and simulation tools
Effective coordinative skills
Proficient computer skills

Job Responsibility

Assist in establishing design criteria to meet customer requirements
Develop the electrical/electronic design to meet the requirements of the design specification or individual customer specification as assigned
Exercise clear communicative and effective coordinative skills with various personnel and groups of varying technical expertise
System design that may include selection and design integration of controllers, power electronic bridges, protection equipment, power supplies, power and signal conductors, and HMI
Circuit design that may include high-speed digital, microprocessor, FPGA, communications, logic, HMI, analog, input sensing, output control, high power, power supplies, power bridges, and others
Coordinate electronic design efforts with firmware/software engineering for proper integration
Select standard parts and proven circuits when practical and calculate electrical stress information for components used in the design
Direct and/or perform the generation of electrical schematics
Evaluate design concepts through theoretical study, proof-of-concept and/or prototype hardware if needed, and design reviews as necessary
Supervise other engineers and technicians assigned to a particular project

What we offer

Medical, Prescription, Dental, Vision, Life, and AD&D insurance
a 401k plan
paid leaves for Vacation, Holiday, Sick, Jury Duty, Bereavement
tuition reimbursement

Fulltime

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Coding Quality Specialist I - Coding

The Coding Quality Specialist reports to the HIM Coding Education Manager to per...

Location

United States , Irving

Salary:

Not provided

CHRISTUS Health

Expiration Date

Until further notice

Requirements

High school diploma or equivalent years of experience required
Completion of accredited Baccalaureate Health Informatics or Health Information Management or an AHIMA approved Coding Certificate Program, preferred
Five (5) or more years of Inpatient and/or Outpatient HB coding experience in an acute care setting preferred
At least one of the following certifications are required: Registered Health Information Administrator (RHIA) (AHIMA), Registered Health Information Technician (RHIT) (AHIMA), Certified Coding Specialist (CCS) (AHIMA), Certified Outpatient Coder (COC) (AAPC), Certified Professional Coder (CPC) (AAPC)
Meets or exceeds an accuracy rate of 95%
Has strong written and verbal communication skills
Able to work independently in a remote setting, with minimal supervision

Job Responsibility

Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders
Facilitate and complete inpatient and outpatient coding reviews
Communicates findings both verbally and in writing in an approved, appropriate format to support training and education such as would be reported in Coding Roundtables or Section Meetings
Assist with development and coordination of review plans, education and training feedback to coding staff that may include query opportunities, documentation opportunities, accurate code assignment (ICD, CPT, HCPCS), accurate payment groupings (DRG, APC), accurate modifier assignment, accurate POA assignment, accurate discharge disposition assignment, compliance and data management
Assist with chart sample selection for reviews and randomization to be coordinated with Coding Managers
Assist with finalizing an annual education workplan for targeted chart reviews and pre-bill reviews
Work collaboratively with Coding Integrity Department to recommend and assist with content and examples that may be used to develop Job Aides, Coding Best Practice references and other assisting resources to support and advance coder knowledge and expertise. Reviews results and performs trend analyses to identify patterns and variations in coding practices and/or case-mix index which require education
Ensure coding reviews are appropriate and effective. Assesses effectiveness through associate evaluations
All other work duties as assigned by the Manager

Fulltime

Robotics Install & Commissioning Technician

The Robotics Install & Commissioning Technician plays a critical role in bringin...

Location

United States , Chicago

Salary:

30.00 - 40.00 USD / Hour

Formic

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field (or equivalent hands-on experience)
3+ years of hands-on experience with industrial 6-axis robots in installation, maintenance, repair, programming, troubleshooting, or technical support roles
3+ years of experience installing and commissioning industrial machinery
Willingness to travel up to 50-60% of the time
Highly action-oriented with strong problem-solving instincts and the ability to navigate unfamiliar challenges independently
Clear, confident communicator - both written and verbal
Comfortable using hand tools and working in hands-on technical environments
Strong PC and general technical proficiency
Valid driver’s license and access to a personal vehicle for local travel (mileage reimbursed per Formic policy)
Ability to lift 50+ pounds

Job Responsibility

Support internal systems integration for robotics-driven automation solutions, including mechanical and electrical setup, system quality checks, documentation, testing, program updates, troubleshooting, Factory Acceptance Testing (FAT), and final system pack-out
Install and commission Formic solutions at customer sites in close collaboration with Deployment Engineers and Project Managers—handling mechanical installation, power-up, testing, troubleshooting, fine-tuning, performance validation, and final documentation
Support refurbishment and reconditioning of returned systems as needed
Assist in identifying, validating, and testing solutions both in the field and throughout the deployment lifecycle
Test and troubleshoot new automation solutions under development
Adhere to Formic’s standardized processes, tools, SOPs, and all applicable legal and safety requirements during integration, configuration, and testing activities

What we offer

Equity in Formic
Comprehensive Healthcare Coverage: 99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
Employee Assistance Program (EAP)
Paid Parental Leave
Company-sponsored 401(k)
Home Office Stipend
Monthly Cell-Phone Reimbursement
Flexible Time-Off
Paid Company Holidays

Fulltime

Final Integration Technician

KP Staffing

Location:
United States , Sugar Land

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Final Integration Technician

Harness Integration Technician

Assembly Technician I

Assembly Technician I (Cables)

Assembly Technician I

Sr. Electrical Engineer

Sr. Electrical Engineer, Sustaining

Coding Quality Specialist I - Coding

Robotics Install & Commissioning Technician

Final Integration Technician

KP Staffing

Location:United States , Sugar Land

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Final Integration Technician

Harness Integration Technician

Assembly Technician I

Assembly Technician I (Cables)

Assembly Technician I

Sr. Electrical Engineer

Sr. Electrical Engineer, Sustaining

Coding Quality Specialist I - Coding

Robotics Install & Commissioning Technician

Location:
United States , Sugar Land

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 26, 2026