CrawlJobs Logo
Baxter Logo Baxter · Quality Control

Final Inspection Technician

United States, Batesville Employment contract 43200.00 - 54000.00 USD / Year · Job Posted May 03, 2026
Apply Position
Job Link Share

Job Description

This is where you make a difference in our patients’ safety. As a member of the Baxter Quality team, you will play an essential part in our mission of saving and sustaining lives. Quality is important throughout the entire product lifecycle and works collaboratively with all areas of the organization. Because Quality touches everything Baxter does, a role in Quality provides many opportunities for growth, learning and a successful career that has a daily impact on people’s lives.

Job Responsibility

  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
  • Give feedback on quality to management, engineers, technicians, and production personnel
  • Manage resources to support production, sort, hold activities

Requirements

  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time.

What we offer

  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
Baxter - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Final Inspection Technician

8 matching positions

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S.
  • We are unable to sponsor or take over sponsorship of an employment visa at this time.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • Fulltime
Read More
Arrow Right

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
Read More
Arrow Right

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
Read More
Arrow Right

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement
  • Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Final Inspection Technician

Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement. Associate Degree in a Technical subject area preferred.
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems.
  • Good organizational skills and basic math skills.
  • Knowledge of basic wiring metrology methods, and ability to read blueprints.
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint.
  • Must be flexible to support team and be able to work 1st or 2nd shift.
  • Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products.
  • Conduct final inspection of completed product.
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises.
  • Maintain production inspection reports in a timely manner.
  • Analyze returned products for cause of failure and assist in repair of defective products.
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery.
  • Monitor inventory levels of DVM parts to prevent shut down of production.
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances.
What we offer
What we offer
  • Support for Parents
  • Continuing Education/Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
Read More
Arrow Right

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement. Associate Degree in a Technical subject area preferred.
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems.
  • Good organizational skills and basic math skills.
  • Knowledge of basic wiring metrology methods, and ability to read blueprints.
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint.
  • Must be flexible to support team and be able to work 1st or 2nd shift.
  • Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time.
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products.
  • Conduct final inspection of completed product.
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises.
  • Maintain production inspection reports in a timely manner.
  • Analyze returned products for cause of failure and assist in repair of defective products.
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery.
  • Monitor inventory levels of DVM parts to prevent shut down of production.
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances.
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Batesville
Salary
Salary:
43200.00 - 54000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED minimum educational requirement. Associate Degree in a Technical subject area preferred
  • 2 years technical experience or equivalent combination of education/work experience in a specific technical field
  • Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
  • Good organizational skills and basic math skills
  • Knowledge of basic wiring metrology methods, and ability to read blueprints
  • Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
  • Must be flexible to support team and be able to work 1st or 2nd shift
  • Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time
Job Responsibility
Job Responsibility
  • Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
  • Conduct final inspection of completed product
  • Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
  • Give presentations to visitors as the need arises
  • Maintain production inspection reports in a timely manner
  • Analyze returned products for cause of failure and assist in repair of defective products
  • Work with line support workers to address material non conformances
  • Participate in lean manufacturing projects for improvement in quality, cost, and delivery
  • Monitor inventory levels of DVM parts to prevent shut down of production
  • Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
Read More
Arrow Right