CrawlJobs Logo

Field Supervisor - Electrical

Australia, Coburg Employment contract · Job Posted June 02, 2026
Apply Position
Job Link Share

Job Description

An exciting opportunity for a Field Supervisor (Electrical) to join Service Stream. Service Stream’s Utilities division are currently seeking a Field Supervisor (Electrical) to join our growing company. Our Field Supervisor is responsible for the day‑to‑day coordination, supervision and quality control of field crews (including contractors), coordinates complex maintenance programs and monitors KPI performance, ensuring works are delivered safely, efficiently, and in accordance with contractual and regulatory requirements.

Job Responsibility

  • Lead and supervise electrical field crews and contractors across maintenance and project activities
  • Ensure effective supervision of Apprentice’s
  • Oversee the planning, prioritisation & supervision of preventive, corrective and emergency maintenance activities across the operational area & resources within the works management system
  • Monitor, manage and coordinate works to ensure compliance with contract KPI’s and implementing corrective actions to address non compliance
  • Act as technical supervisor for Service Stream’s registered electrical contractors’ license
  • Maintain compliance with training requirements by coordinating the training of all staff and sub- contractors per training matrix with support from the Operations Manager
  • Review and approve timesheets to ensure accurate capture of applicable hours against work orders
  • Set and manage performance, safety and conduct expectations
  • Ensure all work is carried out safely and of a high quality consistent with relevant WHS policies, procedures & retail standards, with proper risk assessments, permits and environmental controls in place
  • Liaise with the client and its customers to appropriately manage the client’s network, plant and community expectations
  • Ensure field staff and activities are compliant with Public Authority requirements for provision of services to the network and working in public areas
  • Drive continuous improvement in maintenance practices, asset condition management and operational efficiency

Requirements

  • Fully qualified and licensed electrician with experience in industrial electrical & controls systems
  • Previous experience in a similar role
  • Previous water industry experience (desirable)
  • Previous experience managing operational performance & targets
  • Flexible approach and well developed contract management skills
  • Strong client focus and ability to negotiate with the client
  • Successful applicants must obtain and maintain a satisfactory critical infrastructure background check in accordance with AusCheck requirements (mandatory)

Nice to have

Previous water industry experience

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Field Supervisor - Electrical

8 matching positions

Electrical Supervisor

As an Electrical Supervisor, you will play a crucial part in all electrical aspe...
Location
Location
United States , Kermit; Monahans
Salary
Salary:
Not provided
atlas.energy Logo
Atlas Energy Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or GED required
  • Journeyman Electrical License with minimum 5 years industrial experience
  • Minimum 5 years field leadership in industrial electrical
  • Regularly required to use hands to finger, handle, or feel
  • reach with hands and arms
  • and talk or hear
  • Required to stand
  • walk
  • and stoop, kneel, crouch or crawl, sit and climb or balance
  • Must regularly lift and/or move up to ten pounds, frequently lift and/or move up to fifty pounds, and occasionally lift and/or move more than one hundred pounds
Job Responsibility
Job Responsibility
  • Lead your team in safety complying with OSHA, MSHA, and Atlas policies and procedures
  • Work with outside Engineering firms to design new electrical equipment
  • Travel to various vendor locations and for audits and meetings. This will be more so during the design and construction phase
  • Review, understand, redline, and update electrical schematics, drawings, one lines, e-houses layouts, etc.
  • Lead a team of field electricians on day-to-day task such as inspections, PMs, trouble shooting, reporting, etc.
  • Review and approve time sheets, vacation request, POs and invoices
  • Attend training and certification courses required by the company
  • Developing, maintaining, and reporting on budgets both for OPEX and CAPEX
  • Engaging with third party vendors for quotes and lead times
  • Comply with OSHA and MSHA standards and annual testing on electrical equipment
What we offer
What we offer
  • Room and board provided at or near the location of the job
  • 100% covered Medical, Dental, and Vision
  • 401K with company match, immediate vesting
  • Paid time off (non-rotational roles), 15+ company paid holidays
  • Fulltime
Read More
Arrow Right

Commissioning Electrical Supervisor

Commissioning Electrical Supervisor executes the activities pertaining to his di...
Location
Location
United Arab Emirates , Al Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University Degree or Diploma in Electrical Engineering or equivalent
  • Minimum of 10 years work experience
  • Significant experience in a similar position on EPC Oil & Gas projects/Refinery
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures for electrical items & packages, procedures for the functional tests of the electrical Items according to the instructions of Commissioning Electrical Superintendent
  • To field check the DAC and prepare relevant commissioning punch list, following the CME instructions
  • Follow up of activities according to the schedule and by applying the procedures and safety rules
  • To organize and manage the operations in field of the assigned team from the sub-contractor by controlling their job and the implementation of plant safety procedures in case of emergency
  • To keep records of all activities performed in the logbook for the purpose of monitoring the progress achieved and apply necessary recovery actions
  • To supervise the activities of electrical substation power on and motor run in field
  • Ensure the application of the TAG-OUT/LOCK OUT
  • Support the Vendors specialists in the execution of the job and coordinate their actions with the commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • During the execution of the interlocks, logic and sequence test, check in MCC that all the actions required or actuated from the board operator are properly performed
What we offer
What we offer
  • Single Status
  • Accommodation (Meals) provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right

Commissioning Electrical Supervisor

The Commissioning Electrical Supervisor executes the activities pertaining to th...
Location
Location
Algeria , Laghouat
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution.
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures for Electrical Items & Packages, procedures for the functional tests of the electrical Items according to the instructions of Commissioning Electrical Superintendent
  • To field check the DAC and prepare relevant Commissioning punch list, following the CME instructions
  • Follow up of activities according to the schedule and by applying the procedures and safety rules
  • To organize and manage the operations in field of the assigned team from the Sub Contractor by controlling their job and the implementation of Plant Safety procedures in case of emergency
  • To keep records of all activities performed in the log book for the purpose of monitoring the progress achieved and apply necessary recovery actions
  • To supervise the activities of electrical substation power on and motor run in field. Ensure the application of the TAG-OUT/LOCK OUT
  • Support the Vendors specialists in the execution of the job and coordinate their actions with the Commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • During the execution of the interlocks, logic and sequence test, check in MCC that all the actions required or actuated from the board operator are properly performed
  • Carry out operation of the starters as per the approved work permit request
Read More
Arrow Right

Commissioning Electrical Supervisor

The Commissioning Electrical Supervisor executes the activities pertaining to th...
Location
Location
Algeria , Laghouat
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution
  • Legally authorized to work in Algeria
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures for Electrical Items & Packages, procedures for the functional tests of the electrical Items according to the instructions of Commissioning Electrical Superintendent
  • To field check the DAC and prepare relevant Commissioning punch list, following the CME instructions
  • Follow up of activities according to the schedule and by applying the procedures and safety rules
  • To organize and manage the operations in field of the assigned team from the Sub Contractor by controlling their job and the implementation of Plant Safety procedures in case of emergency
  • To keep records of all activities performed in the log book for the purpose of monitoring the progress achieved and apply necessary recovery actions
  • To supervise the activities of electrical substation power on and motor run in field. Ensure the application of the TAG-OUT/LOCK OUT
  • Support the Vendors specialists in the execution of the job and coordinate their actions with the Commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • During the execution of the interlocks, logic and sequence test, check in MCC that all the actions required or actuated from the board operator are properly performed
  • Carry out operation of the starters as per the approved work permit request
Read More
Arrow Right

Manufacturing Supervisor – Electrical & Mechanical Operations

We are seeking a skilled and experienced Manufacturing Supervisor to lead and ov...
Location
Location
United States , Franklin
Salary
Salary:
Not provided
i-automation.com Logo
iAutomation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree or equivalent in Engineering or related field
  • 3+ years of supervisory experience in a manufacturing or production environment
  • Prior experience with electrical panel wiring, PLC wiring, harness manufacturing, electrification panel wiring
  • Prior experience with mechanical assembly processes, methods and tooling (motor gearbox assembly, linear guide assembly, aluminum extrusion assembly, pneumatic assembly)
  • Proven experience with safety management and adherence to OSHA standards
  • Strong leadership and communication skills, with the ability to motivate and guide a diverse team
  • Proficiency in Microsoft Office Suite
  • Lean manufacturing knowledge
  • Ability to work in a manufacturing environment, which may include exposure to noise, heat, and machinery
  • Ability to stand, walk, and move around the production floor for extended periods
Job Responsibility
Job Responsibility
  • Supervise and coordinate electrical and mechanical direct labor teams to ensure production schedules are met
  • Monitor workflow, prioritize tasks, and allocate resources effectively to achieve operational goals
  • Troubleshoot and resolve production issues in a timely manner
  • Enforce safety protocols and ensure adherence to OSHA and company-specific safety standards
  • Conduct regular safety audits, identify potential hazards, and implement corrective actions
  • Promote a culture of safety awareness and accountability among employees
  • Oversee employee performance, provide coaching and mentorship, and conduct regular performance reviews
  • Address employee concerns, mediate conflicts, and maintain a positive and productive work environment
  • Identify training and development needs and support employees in skill-building initiatives
  • Identify opportunities to improve efficiency, reduce waste, and enhance production processes
  • Fulltime
Read More
Arrow Right

Field Service Technician

Location
Location
Canada , Mississauga
Salary
Salary:
Not provided
advancedtechsearch.com Logo
Advanced Technology Search Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Post-secondary education in mechanical and/or electrical field
  • Previous experience as a Field Service Technician is preferred
  • Must be able to fluently read mechanical assembly drawings, electrical and pneumatic schematics
  • Strong mechanical and electrical troubleshooting skills
  • Excellent communication skills, both oral and in written report format in English
  • Organized, self-disciplined and professional in demeanor
  • Able to travel up to 65-70% of the time
  • Must have a valid passport
  • Must be able to travel to the USA and overseas without restrictions
  • Must have a valid driver’s license without restrictions
Job Responsibility
Job Responsibility
  • Responsible for repairing, modifying, rebuilding and/or debugging of equipment on-site or at customer’s site, working according to technical drawings and other specifications
  • Respects and abides by all applicable customer plant rules, works according to safety rules
  • Provides on-site start-up and commissioning assistance for machinery
  • Provides advice to the customer’s personnel on technical issues related to equipment
  • Requests approval from supervisor and/or engineering for any design changes or modifications performed to machines in the field, prior to execution
  • Provides marked-up drawings or sketches of any changes done in the field for the proper update of the machine by Engineering
  • Files weekly expense, activity and service reports according to established rules
  • Performs debugging /assembly/wiring activities, on the floor, as requested by the Supervisor
  • Ensures equipment is delivered to the highest level of quality by dutifully reporting any quality issues observed on equipment either on the floor or at the customer’s site
  • Maintains a constant state of readiness and is able to travel on short notice
  • Fulltime
Read More
Arrow Right

Field Engineer/Jointer

Our client Networks are currently recruiting Jointer's to be part of a team unde...
Location
Location
United Kingdom , Aberdeen; Dundee; Edinburgh; Glasgow; Inverness; Perth
Salary
Salary:
40000.00 - 46000.00 GBP / Year
hederahiring.com Logo
Hedera Hiring Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Suitable trade tested certification in power cable jointing and terminations from a recognised training school and/or relevant experience
  • Basic operational knowledge of electrical or mechanical systems
  • Craft skills experience using hand tools
  • Experience of working on CDM sites.
  • Emergency 1st Aid and Manual Handling
  • Full Driving Licence
  • SSEN Authorisations
Job Responsibility
Job Responsibility
  • The installation of power cable joints and terminations on underground LV to 33kV cables or substation cable systems, switchgear, transformers associated equipment in substations operating at up to 33kV.
  • Complete all tasks and task types allocated, increasing skill range and knowledge in the process.
  • In addition to power cable jointing this can include excavation works, cable pulling, mechanical fitting, electrical fitting, and small wiring.
  • Undertake the site supervisor role in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour when required
What we offer
What we offer
  • Company commercial vehicle
  • Salary sacrifice car scheme (Hybrid/Electric Vehicle)
  • Pension with a leading provider and up to 8% employer contribution
  • 25 days holiday
  • Private Medical Insurance
  • Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice)
  • Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes.
  • Personal development programme
  • Fulltime
Read More
Arrow Right

Electrical Engineer

We are on a mission to disrupt the global steel industry by producing green stee...
Location
Location
Sweden , Stockholm
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 6-10 years working experience in major industrial capital projects in the areas of Electrical Design & Engineering, preferably in Steel Plant /Power Plant / Hydrogen / Oil & Gas Major Projects
  • Highly developed knowledge of industrial scale electrical designing
  • Experienced in ensuring that all electrical design & engineering documents and installations conform to relevant International & National Codes and Standards and also conform to Local Swedish and Scandinavian standards
  • To prepare, review, approve the design and site installation documents related to Electrical work, Power System Studies, (Load Flow, Short Circuit, Harmonic Analysis, Protection Relay Settings & Coordination, Equipment Sizing, Equipment Electrical Design Calculations, EHV-HV/ LV Sub-stations including Switchgears, Transformers, Cabling, Relays, UPS, Battery Chargers, HV/MV/LV Motors, Drives, Emergency Generators, Transmission and Distribution of Power, Hazardous area classification, field electrical equipment, Fire Alarm System, Instrumentation & Control System is preferred
  • Hands on experience on ETAP software, review of Design and Calculations done through ETAP or similar software
  • Previous project experience with International, Swedish /Scandinavian codes and standards will be an advantage
  • Experience in design, planning, execution, management & communication with all stakeholders in large successful capital projects
  • Extensive experience in coordinating with EPCM & OEM Electrical engineers and following, reviewing, commenting and approving design deliverables and documents
  • Must be knowledgeable about industry best practices and change management
  • Recent experience managing engineering and construction activities in large capital projects
Job Responsibility
Job Responsibility
  • Oversee, review and analyze the electrical design work for one or more areas (Steel Mill, Iron Reduction, Hydrogen Plant, Balance of Plant, PDOP Power Distribution areas and Ground Works) in Boden Project
  • Ensure coordination of our engineering partners to reach cost and time efficient design solutions for all electrical design & engineering work related to your area
  • Participate in the cross-functional delivery and technology teams
  • As part of the owners engineering team you are responsible for engineering assurance within your discipline
  • Ensure that EPCM and OEM partners get the information and feedback required to deliver the work in a safe, cost-effective, and schedule-effective way
  • Represent for the Electrical discipline, being the single point of contact for the delivery and quality of the discipline
  • Own Electrical engineering and design in the areas assigned
  • Provide leadership and guidance on developing the engineering and design strategy and concepts
  • Manage engineering work to ensure compliance to codes, standards, regulations, equipment specifications, and process equipment operating targets
  • Report to Electrical Lead of Project Delivery department
  • Fulltime
Read More
Arrow Right