CrawlJobs Logo

Field QA/QC Welding Inspector

met-ts.co.uk Logo

Met T&S

Location Icon

Location:
Germany , Hamburg

Category Icon
Category:
Construction

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Welding Inspector verifies that welded joints, post-weld heat treatments and non-destructive tests are correctly performed according to the approved specifications prepared by the relevant engineering departments and relevant approved Subcontractor’s documents (Welding Procedure Specification_WPS_, Procedure Qualification Records_PQR, Post Weld Heat Treatment_PWHT_ and Non Destructive Examination_NDE Procedures). The project is planning the expansion of the existing Hamburg Refinery, by adding the following process units and facilities: HVO Unit, pre-treatment Unit, tank farm balance (tanks partially supplied by others), interconnecting lines, new electrical substation and rack room, interconnecting cables between new substation building and existing substation and control room.

Job Responsibility:

  • To witness the welding coupon and destructive non-destructive test execution on shop or at Laboratories for preparation of Procedure Qualification Record (PQR)
  • To support the Home office Welding Group during cycle for the approval of Procedure Qualification Record (PQR), Welding Procedure Specification (WPS) and PWHT procedure
  • To witness the Subcontractor Welder Qualification process
  • To check that welding material respects the requirements of the approved WPS
  • To check that welding machines and ovens are continuously calibrated
  • To check that shop and field welds are performed in compliance with PROJECT specifications and with approved WPS/PQR, NDE and PWHT Procedures, etc.
  • To witness the execution of non-destructive tests, heat treatment and hardness test
  • To check the execution of positive material identification test
  • To grant that welding activities and the tests are recorded by Subcontractors in the welding data base
  • To check that all repairs are performed correctly, and non-destructive tests are regularly repeated
  • To obtain any necessary approval from Home Office Welding Group for deviation, as appropriate, to welding procedures and for performing repairs requiring special procedures
  • To verify the adequacy of information on NDE Reports
  • To verify that adequate and valid welder

Requirements:

  • University Degree or Diploma in relevant discipline or equivalent
  • CSWIP Level 2 (minimum) certification
  • Three Level 2 Certification such as VT, PT or MT, RT or UT
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution
  • Right to work in EU

Additional Information:

Job Posted:
December 10, 2025

Icon
Met T&S - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Field QA/QC Welding Inspector

Qa/qc Manager

Apollo Mechanical Contractors is seeking an experienced QA/QC Manager to lead pr...
Location
Location
United States , Los Alamos
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AWS Certified Welding Inspector (CWI) required
  • additional certifications (NDE Level II/III, ASNT, API) preferred
  • Experience with ASME, AWS, and other applicable nuclear/high‑security codes and standards strongly preferred
  • Strong leadership skills with the ability to supervise QA/QC staff and influence cross‑functional teams
  • Excellent written and verbal communication skills
  • Ability to interpret and apply drawings, technical specifications, procedures, and regulatory requirements
  • Strong organizational and time‑management abilities
  • capable of managing multiple priorities
  • Demonstrated diplomacy, professionalism, and tact when collaborating with customers, inspectors, suppliers, and project teams
  • Proficiency in Microsoft Office Suite (especially Excel and Project)
Job Responsibility
Job Responsibility
  • Develop, implement, and manage the Project QA/QC Program in accordance with nuclear/high‑security requirements and company quality standards
  • Lead and supervise QA/QC inspectors, including task assignment, mentoring, and performance oversight
  • Plan, perform, and document a wide variety of inspections (dimensional, visual, weld, installation, equipment, piping, etc.)
  • Ensure subcontractors and vendors comply with project quality requirements
  • coordinate inspection activities across all project participants
  • Manage and oversee non‑destructive examination (NDE) activities including scheduling, documentation, and acceptance review
  • Review, submit, and track QC technical submittals, ensuring timely approval by customer representatives
  • Serve as primary liaison to the customer on all quality‑related matters
  • participate in quality meetings, audits, and assessments
  • Perform receiving inspections of materials and equipment to verify conformance with purchase orders and specifications
Read More
Arrow Right
New

Quality Control Inspector (Field) - Maintenance

Join us as a Quality Control Inspector, where you'll play a pivotal role in upho...
Location
Location
United States , Cofield
Salary
Salary:
27.00 - 32.00 USD / Hour
lexicon-inc.com Logo
Lexicon, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School education or the equivalent is required
  • Minimum of two years' experience in construction industry and/or welding
  • Certified Welding Inspector (CWI) may be required
  • Must be proficient in reading and interpreting structural steel drawings
  • Must have excellent communication skills
  • Must be able to climb to heights more than 300 feet
  • Overtime and overnight travel are required
  • Must be able to lift to 50 pounds occasionally
  • Must be able to tolerate loud noises and temperature fluctuations
Job Responsibility
Job Responsibility
  • Inspect structural steel for plumb, level, and elevation per AISC Codes and Standards
  • Inspect welding and handling of welding materials for compliance with drawings and governing standards
  • Inspect bolted and/or riveted structural connections by fastening materials, faying surfaces, tension, etc
  • Assist in the inspection of materials received on the job site
  • Assist in the inspection of all phases of steel erection, equipment installation, etc
  • Perform on site internal audit to confirm, or establish compliance with AISC, AWS, and company QA/QC Manual
  • Ensures compliance of AISC and AWS Standards with company subcontractors
  • Work within guidelines provided in company QA/QC Manual and apply codes and standards offered by related governing bodies such as AISC and AWS
  • The ability to work overtime and regular, punctual attendance is required
  • Perform non-essential functions as needed
What we offer
What we offer
  • Health, Dental, Vision, and Life Insurance
  • HSA with employer contributions
  • Life Insurance
  • Paid Holidays and Vacation
  • 401k with company match
  • Lexicon University (free career development and training)
  • Fulltime
Read More
Arrow Right

QA/QC Inspector

The QA/QC Inspector will be responsible for performing and documenting inspectio...
Location
Location
United States , Denver
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AWS CWI
  • Experience in ASME and AWS codes preferred
  • Ability to communicate clearly and effectively
  • Proficient with learning and applying technical concepts
  • Ability to multi-task
  • Willingness to learn and adapt quickly in a fast-paced environment
  • Display diplomacy and tact in collaborating with a wide variety of colleagues, customers and suppliers
  • Microsoft Office Suite (particularly Excel and Project)
  • Bachelor’s degree in construction management, business, engineering, or related field and/or equivalent job experience
Job Responsibility
Job Responsibility
  • Implement the QA/QC program on site
  • Perform various quality inspections i.e. Dimensional, Visual, welding, etc…
  • Coordinate quality inspections with all the site sub-contractors and vendors
  • Coordinate all nondestructive testing on site
  • Complete and coordinate the approval of the site QC technical submittals with the customer
  • Coordinate with the customers representative on all quality matters
  • Perform receiving inspections of equipment and material
Read More
Arrow Right
New

Qa/qc inspector

The QA/QC Inspector will be responsible for performing and documenting inspectio...
Location
Location
United States , Los Alamos
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 4-year degree in construction management, business, engineering or related field. Will accept equivalent level work experience
  • Department of Energy, NRC, or Naval Nuclear Propulsion Program experience preferred
  • AWS CWI preferred
  • Experienced in ASME and AWS codes preferred
  • Ability to communicate clearly and effectively
  • Proficient with learning and applying technical concepts
  • Willingness to learn and adapt quickly in a fast-paced environment
  • Display diplomacy and tact in collaborating with a wide variety of colleagues, customers and suppliers
  • Demonstrates the ability to work independently, without direct supervision
  • Demonstrates strong written and oral communication skills
Job Responsibility
Job Responsibility
  • Implement the QA/QC program on site
  • Perform various quality inspections i.e. Dimensional, Visual, welding, etc
  • Coordinate quality inspections with all the site sub-contractors and vendors
  • Coordinate all nondestructive testing on site
  • Complete and coordinate the approval of the site QC technical submittals with the customer
  • Coordinate with the customers representative on all quality matters
  • Assuring oversight of the proper use of processes, procedures, and their implementation
  • Performing receiving inspection of equipment and material
  • Fulltime
Read More
Arrow Right
New

Qcs Engineer

Location
Location
Brunei
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma or Degree in Mechanical, Materials, Metallurgy, or related engineering field
  • 5+ years’ experience in inspection, QA/QC, or quality surveillance roles within Oil & Gas
  • Certification such as CSWIP 3.1 or equivalent welding inspection qualification (preferred)
  • ASNT Level II in UT/MT/PT/VT (minimum one method
  • more preferred)
  • Good understanding of NDT methods, inspection workflows, welding processes, materials, coatings, and fabrication quality
  • Strong knowledge of quality assurance/quality control processes, NCR handling, traceability, and quality documentation requirements
  • Working knowledge of ISO 9001 and ISO 17020 requirements related to inspection bodies
  • Skilled in interpreting technical drawings, ITPs, procedures, and inspection reports
  • Proficient in MS Office and familiar with digital inspection/reporting systems (e.g., CIRRAS, SAP)
Job Responsibility
Job Responsibility
  • Conduct quality surveillance on related inspection activities to ensure full compliance with COMPANY procedures, specifications, and approved inspection methods
  • Review inspection reports, NDT results, anomaly classifications, and technical documents to verify accuracy, completeness, and alignment with contract requirements
  • Perform field checks on inspection execution to ensure adherence to approved procedures, safety requirements, and ISO 17020 inspection body obligations
  • Verify calibration status, validity, and compliance of inspection tools, NDT equipment, EX-rated devices, and gauges used in field operations
  • Support the QA team in NCR issuance, root cause analysis, corrective actions, and tracking of close-out activities
  • Assist in maintaining quality records, traceability documentation, inspection registers, and data control systems for audit readiness
  • Monitor vendor, third-party, and contractor quality deliverables, including welding, coating, fabrication, and material inspections
  • Participate in internal audits, surveillance visits, quality meetings, and technical reviews with COMPANY representatives
  • Provide quality feedback to operations, inspection teams, and engineers to ensure continuous improvement in inspection execution and reporting quality
  • Support quality input during planning, reporting, verification, and close-out of inspection activities
  • Fulltime
Read More
Arrow Right
New

Head Bartender

Where timeless classics are woven with modern details. Where business meets plea...
Location
Location
Rwanda , Kigali
Salary
Salary:
Not provided
https://www.marriott.com Logo
Marriott Bonvoy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or G.E.D. equivalent
  • At least 2 years of related work experience
  • At least 1 year of supervisory experience
Job Responsibility
Job Responsibility
  • Ensure staff is working together as a team to ensure optimum service and that guest needs are met
  • Inspect grooming and attire of staff, and rectify any deficiencies
  • Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc.
  • Inspect storage areas for organization, use of FIFO, and cleanliness
  • Complete scheduled inventories and stock and requisition necessary supplies
  • Monitor dining rooms for seating availability, service, safety, and well being of guests
  • Complete work orders for maintenance repairs
  • Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees
  • and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process
  • Follow all company and safety and security policies and procedures
  • Fulltime
Read More
Arrow Right
New

Kuwait Country Operations Manager

Join us as Country Operations Manager Kuwait Function Customer Development Work ...
Location
Location
Kuwait , Al Asimah
Salary
Salary:
Not provided
unilever.com Logo
Unilever
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • +7yrs experience in FMCG
  • Business Acumen in P&L, budget management
  • Leadership & accountability
  • Stakeholder management
  • Business Group & category understanding
Job Responsibility
Job Responsibility
  • Business Development: Using data tools to track & analyse sales performance, market share, consumer trends, and competitor pricing. Providing accurate cross-functional sales forecasts
  • Route-to-Market (RTM) Strategy: Designing and implementing the most efficient ways to get our products to the targeted customers
  • Pricing Strategy: establish pricing strategy & promotional plans across different channels to align with different category targets
  • Managing Customer Programs: Managing Shopper marketing activities through in-store execution, marketing campaigns
  • Strategic Growth Management: Owns the end-to-end sales cycle, from lead generation and initial outreach to final execution
  • Cross-Functional Collaboration: Aligns with internal stakeholders to ensure that promised solutions meet technical realities and delivery timelines
  • Risk Mitigation: Identifies potential market shifts or competitor movements, driving scenario planning to safeguard the sales pipeline
  • Business Optimization: Continuously refines the business development toolkit to improve conversion rates and improve the sales cycle
  • Analytical & Problem-solving skills: Able to visualize the data and find the operational root cause and prpose the optimal solutions
  • Innovation Execution: Coordinate with business groups, demand planners and sales teams for new product launches
  • Fulltime
Read More
Arrow Right
New

Commercial Banking Portfolio Management Manager

Wells Fargo is seeking a Commercial Banking Portfolio Management Manager
Location
Location
India , Hyderabad
Salary
Salary:
Not provided
https://www.wellsfargo.com/ Logo
Wells Fargo
Expiration Date
May 28, 2026
Flip Icon
Requirements
Requirements
  • 5+ years of Commercial Banking Portfolio Management experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education
  • 2+ years of leadership experience
  • Post-Graduation in Finance / Management / Charted Accountant or equivalent
  • Minimum experience of 7 years and people management experience of minimum 1 year
  • Strong data-based decision making and communication skills
  • Good working knowledge in MS Office
  • Flexible to work across I&P locations & shift timings (preferable)
  • Certification in Campus MBA, Six Sigma are added advantages
Job Responsibility
Job Responsibility
  • Manage and develop a team of individuals with low to moderate work complexity and risk in Commercial Banking Portfolio Management functional area
  • Ensure credit execution is consistent and aligned with required credit policies and processes
  • Support and drive adoption of new credit policies and related changes across the team
  • Identify and recommend opportunities for process improvement and risk control development in the Commercial Banking Portfolio Management functional area
  • Make decisions and resolve issues regarding resources, objectives, and operations of functional area and team to meet business objectives
  • Interpret and develop credit policies and procedures
  • Support in execution of policy changes
  • Collaborate and consult with Commercial Banking Portfolio Management peers, colleagues, and more experienced managers
  • Coach and develop credit team
  • Manage allocation of people and financial resources for Commercial Banking Portfolio Management
  • Fulltime
Read More
Arrow Right