Feed Operations Technician Job at Mowi Poland (Fort William)

Operations & Maintenance Technician

Crusoe is seeking a dedicated Operations & Maintenance Technician (OMT) to ensur...

Location

United States , Abilene

Salary:

33.00 - 38.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Demonstrable knowledge of all facets of power plant operations and the ability to make competent decisions in emergency situations
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Proficiency in troubleshooting mechanical, instrumentation, and electrical equipment, as well as operating welding and cutting equipment
Good verbal and written communication skills and proficiency in Microsoft Office, specifically Excel and Word
Ability to walk, reach, climb, and lift up to 50 pounds
Willingness to work 12-hour rotating shifts and availability for call-ins or work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Operate and maintain a simple cycle power generating facility and its auxiliary equipment, including heat recovery steam generators, air compressors, and fire suppression systems with minimal guidance
Identify and resolve CEMS problems, perform Root Cause Analysis of failures, and repair defective plant equipment such as pumps, valves, and gearboxes
Conduct "Inspection of Watch" on all plant systems and read meters or automatic devices to record temperatures, vibrations, fluid levels, and water chemistry to verify operating conditions
Perform analysis on HRSG, auxiliary boiler, and cooling tower systems
control chemical feed and blowdown rates to maintain proper control ranges
Open and close circuit breakers for system operation or electrical isolation, and perform piping and conduit installation for plant upgrades
Utilize the facility’s computerized maintenance management system (CMMS) and assist with the development of Operations and Maintenance procedures
Coordinate with vendors for chemical ordering and equipment repair, work with Plant Management on capital projects, and assist in administering the Operator training program
Perform general housekeeping, painting, and continuous improvement tasks to maintain the appearance and cleanliness of the plant and control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Operations & Maintenance Technician

Crusoe is seeking a dedicated Operations & Maintenance Technician (OMT) to ensur...

Location

United States , Abilene

Salary:

33.00 - 38.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Demonstrable knowledge of all facets of power plant operations and the ability to make competent decisions in emergency situations
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Proficiency in troubleshooting mechanical, instrumentation, and electrical equipment, as well as operating welding and cutting equipment
Good verbal and written communication skills and proficiency in Microsoft Office, specifically Excel and Word
Ability to walk, reach, climb, and lift up to 50 pounds
Willingness to work 12-hour rotating shifts and availability for call-ins or work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Operate and maintain a Combined Cycle power generating facility and its auxiliary equipment, including heat recovery steam generators (HRSG), air compressors, and fire suppression systems with minimal guidance
Identify and resolve CEMS problems, perform Root Cause Analysis of failures, and repair defective plant equipment such as pumps, valves, and gearboxes
Conduct "Inspection of Watch" on all plant systems and read meters or automatic devices to record temperatures, vibrations, fluid levels, and water chemistry to verify operating conditions
Perform analysis on HRSG, auxiliary boiler, and cooling tower systems
control chemical feed and blowdown rates to maintain proper control ranges
Open and close circuit breakers for system operation or electrical isolation, and perform piping and conduit installation for plant upgrades
Utilize the facility’s computerized maintenance management system (CMMS) and assist with the development of Operations and Maintenance procedures
Coordinate with vendors for chemical ordering and equipment repair, work with Plant Management on capital projects, and assist in administering the Operator training program
Perform general housekeeping, painting, and continuous improvement tasks to maintain the appearance and cleanliness of the plant and control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Operations & Maintenance Technician II

Crusoe is seeking a skilled Operations & Maintenance Technician II (OMT II) to e...

Location

United States , Abilene

Salary:

41.00 - 47.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Comprehensive knowledge of mechanical, instrumentation, and electrical equipment, including proficiency in repairing, replacing, and dismantling defective parts
Adept at diagnosing problems with mechanical equipment and performing water chemistry analysis
Strong verbal and written communication skills with the ability to train other personnel and write operating procedures
Capable of operating welding and cutting equipment, as well as tools such as drill presses, pipe threading machines, and grinders
Ability to perform walking, reaching, climbing, and lifting up to 50 pounds
Willingness to work a 12-hour rotating shift and be available for call-ins and work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required

Job Responsibility

Operate and maintain Combined Cycle power generating facility equipment, including heat recovery steam generators (HRSG), air compressors, and fire suppression systems, with minimal guidance or assistance
Adeptly troubleshoot, diagnose, and repair defective plant equipment such as pumps, valves, fans, gearboxes, and turbine components in a timely fashion
Perform an "Inspection of Watch" on each plant system and record data from meters and gauges—including temperature, vibration, fluid levels, and water chemistry—to verify operating conditions
Perform analysis on HRSG, auxiliary boiler, and cooling tower systems, making necessary adjustments to chemical feed and blowdown rates to ensure chemistry remains within proper control ranges
Responsible for opening and closing circuit breakers for system operation or electrical isolation, and performing piping and conduit installation for plant upgrades
Utilize the facility’s computerized maintenance management system (CMMS), assist with the development of O&M procedures, and write routine reports or work requests
Strictly adhere to all safety and environmental rules, facility safety programs, and plant environmental permits to protect personnel and public safety
Coordinate with vendors for chemical ordering and timely equipment repairs, and assist in performing Root Cause Analysis (RCA) of failures
Perform general housekeeping and painting projects to maintain the cleanliness and appearance of all plant areas and the control room

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Operations & Maintenance Technician II

Crusoe is seeking a skilled Operations & Maintenance Technician II (OMT II) to e...

Location

United States , Abilene

Salary:

41.00 - 47.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Comprehensive knowledge of mechanical, instrumentation, and electrical equipment, including proficiency in repairing, replacing, and dismantling defective parts
Adept at diagnosing problems with mechanical equipment and performing water chemistry analysis
Strong verbal and written communication skills with the ability to train other personnel and write operating procedures
Capable of operating welding and cutting equipment, as well as tools such as drill presses, pipe threading machines, and grinders
Ability to perform walking, reaching, climbing, and lifting up to 50 pounds
Willingness to work a 12-hour rotating shift and be available for call-ins and work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Plant Operations & Maintenance: Operate and maintain simple cycle power generating facility equipment, including heat recovery steam generators, air compressors, and fire suppression systems, with minimal guidance or assistance
Technical Troubleshooting & Repair: Adeptly troubleshoot, diagnose, and repair defective plant equipment such as pumps, valves, fans, gearboxes, and turbine components in a timely fashion
System Inspections & Data Recording: Perform an "Inspection of Watch" on each plant system and record data from meters and gauges—including temperature, vibration, fluid levels, and water chemistry—to verify operating conditions
Water Chemistry Management: Perform analysis on HRSG, auxiliary boiler, and cooling tower systems, making necessary adjustments to chemical feed and blowdown rates to ensure chemistry remains within proper control ranges
Electrical & Mechanical Tasks: Responsible for opening and closing circuit breakers for system operation or electrical isolation, and performing piping and conduit installation for plant upgrades
Operational Documentation: Utilize the facility’s computerized maintenance management system (CMMS), assist with the development of O&M procedures, and write routine reports or work requests
Safety & Regulatory Adherence: Strictly adhere to all safety and environmental rules, facility safety programs, and plant environmental permits to protect personnel and public safety
Cross-Functional Collaboration: Coordinate with vendors for chemical ordering and timely equipment repairs, and assist in performing Root Cause Analysis (RCA) of failures
Continuous Improvement: Perform general housekeeping and painting projects to maintain the cleanliness and appearance of all plant areas and the control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Robotics Field Service Engineer

The Robotics Field Service Engineer (FSE) plays a critical role in this mission....

Location

United States , Madison

Salary:

70000.00 - 120000.00 USD / Year

Formic

Expiration Date

Until further notice

Requirements

3+ years of hands-on field service experience working on robotic or automation equipment
Practical troubleshooting skills across electrical, mechanical, and PLC/robotic control systems
Experience reading electrical schematics, wiring diagrams, and pneumatic drawings
Strong familiarity with safety protocols, especially LOTO, and adherence to GMP or industrial SOPs
Experience using CMMS tools (MaintainX, UpKeep, FIIX, etc.) to track, schedule, and report maintenance
Comfortable with local area travel up to 80%
Overnight travel up to 50%
Clear communicator across email, phone, and on-site conversations—able to write effective service reports

Job Responsibility

Perform preventative, corrective, and predictive maintenance for robotic manufacturing cells
Respond to alarms or escalations (remote or on-site), diagnosing and resolving issues
Provide on-site production support and informal training to operators and technicians
Use CMMS tools (e.g. MaintainX) to log and track all field activity, asset status, and spare parts needs
Coordinate self, vendors, and partners for in-field support
Maintain a clean, safe work environment and ensure compliance with OSHA and Formic safety standards
Monitor system performance remotely via Formic dashboards (e.g., Grafana)
Generate detailed service reports including issue, RCA (root cause analysis), resolution, and follow-ups
Feed real-world system and customer insights back into Continuous Improvement and Customer Success teams
Help identify systemic issues and opportunities to drive fleet-wide maintenance reductions

What we offer

Equity in Formic
99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
Employee Assistance Program (EAP)
Paid Parental Leave
Company-sponsored 401(k)
Home Office Stipend
Monthly Cell-Phone Reimbursement
Flexible Time-Off
Paid Company Holidays

Fulltime

Robotics Field Service Engineer

The Robotics Field Service Engineer (FSE) plays a critical role in this mission....

Location

United States , Dallas - Fort Worth; Austin; San Antonio

Salary:

70000.00 - 120000.00 USD / Year

Formic

Expiration Date

Until further notice

Requirements

3+ years of hands-on field service experience working on robotic or automation equipment
Practical troubleshooting skills across electrical, mechanical, and PLC/robotic control systems
Experience reading electrical schematics, wiring diagrams, and pneumatic drawings
Strong familiarity with safety protocols, especially LOTO, and adherence to GMP or industrial SOPs
Experience using CMMS tools (MaintainX, UpKeep, FIIX, etc.) to track, schedule, and report maintenance
Comfortable with frequent local area travel (primarily greater Dallas-Fort Worth, Austin, San Antonio areas)
Comfortable with approx. 50% overnight travel (all US-based travel)
Clear communicator across email, phone, and on-site conversations—able to write effective service reports

Job Responsibility

Perform preventative, corrective, and predictive maintenance for robotic manufacturing cells
Respond to alarms or escalations (remote or on-site), diagnosing and resolving issues in accordance with customer ASA (agreed service agreements)
Provide on-site production support and informal training to operators and technicians
Use CMMS tools (e.g. MaintainX) to log and track all field activity, asset status, and spare parts needs
Coordinate self, vendors, and partners for in-field support—including scheduling and customer alignment
Maintain a clean, safe work environment and ensure compliance with OSHA and Formic safety standards
Monitor system performance remotely via Formic dashboards (e.g., Grafana)
Generate detailed service reports including issue, RCA (root cause analysis), resolution, and follow-ups
Feed real-world system and customer insights back into Continuous Improvement and Customer Success teams
Help identify systemic issues and opportunities to drive fleet-wide maintenance reductions

What we offer

Equity in Formic
99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
Employee Assistance Program (EAP)
Paid Parental Leave
Company-sponsored 401(k)
Home Office Stipend
Monthly Cell-Phone Reimbursement
Flexible Time-Off
Paid Company Holidays

Fulltime

Robotics Field Service Engineer

The Robotics Field Service Engineer (FSE) plays a critical role in this mission....

Location

United States , Chicago

Salary:

70000.00 - 120000.00 USD / Year

Formic

Expiration Date

Until further notice

Requirements

3+ years of hands-on field service experience working on robotic or automation equipment
Located in, or willing to relocate to, the Chicago, IL area and report to our Woodridge, IL office
Practical troubleshooting skills across electrical, mechanical, and PLC/robotic control systems
Experience reading electrical schematics, wiring diagrams, and pneumatic drawings
Strong familiarity with safety protocols, especially LOTO, and adherence to GMP or industrial SOPs
Experience using CMMS tools (MaintainX, UpKeep, FIIX, etc.) to track, schedule, and report maintenance
Comfortable with local area travel up to 80%
Overnight travel up to 50%
Clear communicator across email, phone, and on-site conversations—able to write effective service reports

Job Responsibility

Perform preventative, corrective, and predictive maintenance for robotic manufacturing cells
Respond to alarms or escalations (remote or on-site), diagnosing and resolving issues
Provide on-site production support and informal training to operators and technicians
Use CMMS tools (e.g. MaintainX) to log and track all field activity, asset status, and spare parts needs
Coordinate self, vendors, and partners for in-field support—including scheduling and customer alignment
Maintain a clean, safe work environment and ensure compliance with OSHA and Formic safety standards
Monitor system performance remotely via Formic dashboards (e.g., Grafana)
Generate detailed service reports including issue, RCA (root cause analysis), resolution, and follow-ups
Feed real-world system and customer insights back into Continuous Improvement and Customer Success teams
Help identify systemic issues and opportunities to drive fleet-wide maintenance reductions

What we offer

Equity in Formic
99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
Employee Assistance Program (EAP)
Paid Parental Leave
Company-sponsored 401(k)
Home Office Stipend
Monthly Cell-Phone Reimbursement
Flexible Time-Off
Paid Company Holidays

Fulltime

NICU Feeding Technician

The Infant Feeding Preparation and Delivery Specialist is responsible for the pr...

Location

United States , Albany

Salary:

18.00 - 18.72 USD / Hour

Aramark

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Minimum of 1 year of additional schooling
nutrition background or experience preferred
Ability to perform well under stress and work independently within a team environment with minimal supervision
Effective verbal and written communication skills in English
Physical capability to bend, lift, and push up to 20-40 pounds, with extensive walking and standing required throughout the day
Flexibility to work weekends and holidays as needed
Completion of a training competencies for formula and breast/donor milk preparation

Job Responsibility

Able to read and interpret provider orders to able to prepare and delivers formula and breast/donor milk according to established safety and regulatory standards
Operates equipment necessary to successfully prepare and deliver infant feedings, ensuring quality and compliance with sanitary requirements
Maintains accurate inventories of items and products utilized in the NICU for infant feeding preparation and delivery
Demonstrates effective organizational skills, especially in managing formula and breast/donor milk preparation and storage
Utilizes effective communication skills to coordinate with interdisciplinary teams and manage job duties
Assists in training other healthcare professionals and new hires on procedures related to infant feeding preparation, as staffing allows

What we offer

medical
dental
vision
work/life resources
retirement savings plans like 401(k)
paid days off such as parental leave and disability coverage

Fulltime

Select Country

Feed Operations Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?