This list contains only the countries for which job offers have been published in the selected language (e.g., in the French version, only job offers written in French are displayed, and in the English version, only those in English).
Amentum is seeking a 1st shift Industrial Electrician III in Mossville Tech Center. Typical work hours are 6:00 AM -4:30 PM M-Th or T-F; hours may vary based on business demand. This electrical maintenance technician is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive maintenance on the facility electrical equipment in an industrial, large commercial, or logistics distribution environment. This maintenance electrician is responsible for providing an intermediate level of expertise in responding to work orders, troubleshooting, and providing preventive and corrective maintenance on the facility electrical and mechanical equipment. Must have the ability to install conduit and terminate wiring, diagnose and troubleshoot all electrical equipment and systems including, but not limited to, motors, drives, low voltage controls, lighting, PLC’s, HVAC, Chiller, etc. Must demonstrate good written and verbal communication. The Industrial Electrician III must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required.
Job Responsibility:
Diagnoses, troubleshoots, maintains, and repairs electrical equipment up to 480-volt 3 phase and facility systems such as RTU, doors, lighting, VFDs and motors circuits
Runs conduit and terminates wire according to job specified
Working knowledge of the National Electric Code (NEC)
Utilizes the building automation system to track building conditions and the operation of facilities equipment
Utilizes strong electrical and mechanical skills to complete assignments
Performs preventive maintenance on industrial electrical control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)
Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
Recommends measures to improve maintenance methods and equipment performance
Understands company policies and enforces safety regulations
Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
Maintain, troubleshoot and repair electrical equipment, such as area personal fans, thermostats for gas and electric heaters, reset of buss bars and disconnects, etc
Troubleshooting of electrical components such as, but not limited to PLC’s, AC & DC drives, relay logic, single loop controllers, pneumatics & hydraulics
Operates various measuring, diagnostic and electrical testing instruments to help provide energy efficiency solutions
Electrical system components - MCC’s, inverters, motors, etc
Ability to read and interpret mechanical and electrical schematics/prints, updating electrical prints/schematics assigned for modification
Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work
Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer
Math skills to include Arithmetic, Application of formulas such as current, voltage, etc., Conversion of measurement units
Other duties as assigned by Manager or Supervisor
Requirements:
High school diploma or demonstrated equivalent
Three years of experience as a maintenance electrician in an industrial environment or demonstrated equivalent combination of education and experience
Must have the ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
Must be willing to work overtime when required
May be required to work holidays and weekends
Qualified applicants who are offered a position must pass a pre-employment substance abuse test
This position may require a valid Driver’s License
This position will require the ability to obtain a security access badge at our client’s location
This position may require various shifts, weekends, and alternative work schedules
Requires the ability to regularly lift up to 50 lbs
Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift
Requires the flexibility to bend/stoop, squat repetitive during shift
Requires the ability to regularly kneel repetitive for shift
Requires the ability to move in a 90-degree fashion on a repetitive basis for shift
Requires the ability to stretch/reach on a repetitive basis for shift
Requires the ability to walk extensively throughout the plant during shift
Requires the use of a Company/Client approved utility knife
Requires the ability to differentiate colors pertaining to wire color-coding
Some tasks will require repetitive wrist movement
Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress
Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed
Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained
Nice to have:
Experience working safely with 480V 3 phase circuits
Experience troubleshooting and repairing industrial lighting systems
Experience making repairs on rubber production or similar equipment
Experience troubleshooting and repairing electric motors and motor controls
Experience troubleshooting VFD’s
Experience working with a PC-based work order opening, closing and time reporting system