Fabrication Welder Job at JRL Group (Nottingham)

New

Nde Inspector, Certified Welding Inspector (Cwi)

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled N...

Location

United States , Little Rock

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
Must be able to read and understand blueprints and shop drawings and pass an inspector test
Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry
Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification

Job Responsibility

Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document
Interpret codes and specifications in accordance with the drawing requirements
Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications
Recommend and approve repairs as well as perform visual inspection of work in progress and completed work
Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures
Verify and document welder qualifications
Verify the compliance of base metals with the applicable specifications
Appraise welding joint designs and joint preparations for compliance with drawing
Verify proper fit, cleanliness, and environmental conditions
Verify tack weld quality

What we offer

Health, Dental, Vision, and Life Insurance
HSA with employer contributions
Life Insurance
Paid Holidays and Vacation
401k with company match
Lexicon University provides free career development and training

Fulltime

Welder/Fabricator

Build the machines that move the earth. We are seeking skilled, flexible Welders...

Location

United Kingdom , Stockton-on-Tees

Salary:

24.10 GBP / Hour

Randstad

Expiration Date

June 30, 2026

Requirements

Previous experience of Fabrication
Time Served Welder
Relevant NVQ Level 3

Job Responsibility

Work on build/weld fixtures to tight tolerances
Work under own initiative as well as part of a team
Follow a standard work procedure/housekeeping
Carry out some manual lifting
Use overhead cranes
Jig work
Adhering to PPE requirements and standards in place

What we offer

Overtime available
On site occupational health
Additional holidays per year added to allowance depending on service
Worker recognition schemes
Full induction and ongoing training
Potential to be made permanent with our client
Development opportunities and ability to apply for internal CAT roles
Auto enrolment pension scheme
Access to Randstad Benefits app
Dedicated On site Randstad team to help with any queries

Fulltime

!

Welder

Do you have technical expertise and are looking to propel your career within a c...

Location

Canada , Dorval

Salary:

21.00 - 25.00 CAD / Hour

Randstad

Expiration Date

August 03, 2026

Requirements

DVS (DEP) in Welding-Fitting or equivalent welding experience
Minimum of 3 years of prior welding experience
Strong team spirit and the ability to adapt to shift work and occasional long hours
Must be able to lift packages weighing up to 50 lbs

Job Responsibility

MIG and TIG Proficiency: Ability to weld joints with minimal supervision using MIG and TIG processes
Repair Work: Repair defective welds using the necessary tools and equipment
Blueprint Reading: Read and interpret blueprints for precise placement, positioning, and dimensions
Structural Assembly: Weld structures and components together to ensure leak-proof/airtight joints
Quality Inspection: Examine workpieces for weak points or defects to ensure they are properly repaired
Fabrication: Shape and fabricate metal parts as required
Maintenance & Cleaning: Clean work surfaces and finished welds using scrapers, wire brushes, and cleaning solvents

What we offer

100% company-paid benefits program that includes health, dental, and vision coverage from day 1
Paid uniforms (laundering included) & PPE
$100 boot voucher allowance
RRSP program with 6% match
$500 referral bonus if you recommend a qualified colleague or friend

Fulltime

Millwright - Maintenance Technician

We are seeking a qualified Millwright/Maintenance Technician for our sawmill in ...

Location

United States , Sonora

Salary:

34.38 - 39.85 USD / Hour

Sierra Pacific Industries

Expiration Date

Until further notice

Requirements

2 years recent verifiable related work history or equivalent education
Proficient in welding, cutting, and using hand tools for repairs
Working knowledge of hydraulics, pumps, motors, gearboxes, conveyors, and bearings
Ability to recognize, report, and repair mechanical defects

Job Responsibility

Maintain and repair all mechanical parts and machinery in a manufacturing facility
Troubleshoot, install, replace, and repair machines and equipment including mechanical, pneumatic, and hydraulic systems
Dismantle machinery and equipment, locate cause of malfunctioning or mechanical breakdown, replace parts from stock or fabricate replacement parts as needed
Fabricate machine components for repairs and improvements of mechanical devices
Effectively conduct and assess diagnostic tests to ensure optimum system functionality
Assemble, install, and proactively maintain mechanical systems, machinery, and equipment for efficient operation
Operate arc welder, cutting torch, hand tools, forklift, and welding truck
Fabricate, weld, mill, and lathe as needed
Perform general maintenance in a safe and efficient manner and maintain a clean work area
Work may consist of various shifts and overtime including weekends and holidays during busy production times

What we offer

Excellent low-cost health benefits
Retirement plan with employer-paid contributions
Paid vacation and 10 holidays
Full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums
401(k) with Company Match
Additional Retirement Contributions
company-paid Life Insurance
We train and promote from within
Drug-free and tobacco-free workplace

Fulltime

Maintenance Technician

At Sierra Pacific Industries, we understand our greatest strength is the people ...

Location

United States , Merrill

Salary:

29.46 - 33.26 USD / Hour

Sierra Pacific Industries

Expiration Date

Until further notice

Requirements

2 years’ recent verifiable related work history or equivalent education
Proficient in welding, cutting, and using hand tools for repairs
Experience using motor control circuits, 480 volt 3-phase AC/DC motors, starters, electrical, and hydraulic systems
Working knowledge of pneumatics, pumps, motors, gearboxes, conveyors, and bearings
Proven experience using forklift, man lift, and most rigging equipment
Ability to recognize, report, and repair mechanical defects

Job Responsibility

Run, maintain and repair all mechanical parts and machinery in a manufacturing facility
Troubleshoot, install, replace, and repair machines and equipment including mechanical, pneumatic, and hydraulic systems
Assist with Motion Control, PLC, MMI, and HMI programming, troubleshooting, and repair
Install electrical components such as conduit, wiring, motor controls, starters, VFD, and soft starts
Dismantle machinery and equipment, locate cause of malfunctioning or mechanical breakdown, replace parts from stock, or fabricate replacement parts as needed
Fabricate machine components for repairs and improvements of mechanical devices
Effectively conduct and assess diagnostic tests to ensure optimum system functionality
Assemble, install, and proactively maintain mechanical systems, machinery, and equipment for efficient operation
Operate arc welder, cutting torch, hand tools, and forklift
Fabricate, weld, mill, and lathe as needed

What we offer

Up to $1,500 hiring bonus
We train and promote from within
Excellent low-cost health benefits
Retirement plan with employer-paid contributions
Paid vacation and 10 holidays
Full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums
401(k) with Company Match
Additional Retirement Contributions
Company-paid Life Insurance

Fulltime

Millwright - Maintenance Technician

At Sierra Pacific Industries, we understand our greatest strength is the people ...

Location

United States , Shasta Lake

Salary:

34.81 - 38.69 USD / Hour

Sierra Pacific Industries

Expiration Date

Until further notice

Requirements

2 years' recent verifiable related work history or equivalent education
Proficient in welding, cutting, and using hand tools for repairs
Working knowledge of hydraulics, pumps, motors, gearboxes, conveyors, and bearings
Ability to recognize, report, and repair mechanical defects

Job Responsibility

Maintain and repair all mechanical parts and machinery in a manufacturing facility
Troubleshoot, install, replace, and repair machines and equipment including mechanical, pneumatic, and hydraulic systems
Dismantle machinery and equipment, locate cause of malfunctioning or mechanical breakdown, replace parts from stock or fabricate replacement parts as needed
Fabricate machine components for repairs and improvements of mechanical devices
Effectively conduct and assess diagnostic tests to ensure optimum system functionality
Assemble, install, and proactively maintain mechanical systems, machinery, and equipment for efficient operation
Operate arc welder, cutting torch, hand tools, forklift, and welding truck
Fabricate, weld, mill, and lathe as needed
Perform general maintenance in a safe and efficient manner and maintain a clean work area
Work may consist of various shifts and overtime including weekends and holidays during busy production times

What we offer

Excellent low-cost health benefits
Retirement plan with employer-paid contributions
Paid vacation and 10 holidays
Full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums
401(k) with Company Match
Additional Retirement Contributions
Company-paid Life Insurance

Fulltime

Welder

Amentum is looking for an experienced Welder to work OCONUS. You will be assigne...

Location

Japan , Tokyo

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Minimum of five (5) years of welding and metal fabrication experience
Demonstrated experience reading and interpreting architectural and engineering (A&E) drawings, shop drawings, and specifications
Knowledge of applicable U.S. codes, standards, and accepted trade practices
Knowledge of welding-related occupational hazards and required safety precautions
Experience supporting construction projects
Strong organizational skills with the ability to exercise sound judgment and make independent decisions
High school diploma or GED required
AWS D1.1 certification required
Valid passport
Valid driver's license from Home of Record

Job Responsibility

Perform welding on various materials and assemblies using multiple welding processes, including SMAW (arc), GTAW (TIG), GMAW (MIG), and brazing
Perform welding and fabrication associated with FEBR wall systems, including steel framing components, embeds, connection plates, anchors, stiffeners, and structural supports, in accordance with approved drawings and specifications
Repair and modify metal surfaces and assemblies (doors, frames, drain covers, fences, gates, grates, railings, furniture, tools, parts, etc.) to ensure safe and efficient use
Install welded and fabricated components to support secure construction activities while meeting schedule, quality, and safety requirements
Support secure interior construction by coordinating welding activities with carpenters, electricians, and other trades working on FEBR walls and related systems
Maintain welding shop, tools, equipment, vehicles, and work areas to ensure operational readiness and compliance with safety standards
Coordinate daily activities with supervisors and other trades to complete work orders efficiently and in proper sequence
Request welding materials and consumables to maintain inventory and ensure uninterrupted work progress
Assist other trades as required to support overall project execution
Respond to emergency or urgent repair situations as assigned

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Welder/Fabricator

The Welder/Fabricator is responsible for the fabrication, assembly, repair, and ...

Location

United States , Ault

Salary:

25.00 - 29.00 USD / Hour

1888 Red River Holdings LLC

Expiration Date

July 10, 2026

Requirements

High School Diploma or GED preferred
Minimum 1-year previous welding/fabrication experience or verifiable related education
Ability to read and interpret fabrication drawings and blueprints
Ability to understand and follow written and verbal instructions
Ability to pass applicable welding test
3G Plate test in accordance with the requirements of ASME Sec. IX
Mig process – Hardwire root with Fluxcore fill and cap

Job Responsibility

Perform structural and code welding in accordance with applicable standards and project requirements
Fabricate skids, supports, framework, process piping, pressure vessels, and custom fabrication projects
Read and interpret fabrication drawings, blueprints, and work instructions
Operate welding, cutting, grinding, and fabrication equipment safely & effectively
Inspect completed work to ensure quality and compliance with specifications
Maintain proper use, care and storage of tools and equipment
Follow company quality procedures, safety, policies, and fabrication standards
Assist with material handling, fit-up, assembly and shop activities as needed
Other duties as assigned

What we offer

Medical, dental, and vision insurance including options for dependents
Additional voluntary coverage options
Employee Assistance Program (EAP)
Paid Family and Medical Leave
401(k) with company match
Weekly accrued paid time off (PTO), sick time and paid holidays
8 Holidays
$25,000 Life Insurance and AD&D
Referral Program

Fulltime

Select Country

Fabrication Welder

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?