CrawlJobs Logo

Experienced Production Equipment Operator

peabodyenergy.com Logo

Peabody Energy

Location Icon

Location:
United States , Wright

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided

Job Description:

We are currently seeking an Experienced Production Equipment Operator to join our Open Cut Mining team at our North Antelope Rochelle Mine (NARM). NARM is the world’s largest surface coal mine and is located in Wright, Wyoming. The mine produces high quality thermal coal that is loaded onto haul trucks and then shipped by rail. It has approximately 465 million tons of coal reserves. This role will be responsible for the operation of open cut mine equipment to facilitate the production of coal.

Job Responsibility:

  • Visibly support and champion Peabody's Mission and Values
  • Act in accordance with and adhere to Safety as a Way of Life Management System
  • Inspect and service equipment
  • Plan digging activities to ensure optimal coal recovery
  • Dig coal and waste to ensure optimal recovery
  • Train more junior production employees
  • Pre-start inspection of equipment and work environment
  • Collect waste and tipping at correct location
  • Monitor the control panel of the equipment to identify and correct malfunctions and service requirements
  • Ensure activities comply with safety, environmental and statutory requirements
  • Other duties as assigned by the company

Requirements:

  • Three years’ experience operating dozer equipment at a mine site is preferred
  • Ability to solve problems and troubleshoot situations arising in the pit area as needed
  • Ability to operate auxiliary equipment such as forklifts, overhead shop cranes, etc.
  • Ability to work in all types of weather conditions and at different times of day
  • Ability to work a flexible schedule as required by business need
  • Ability to work rotating shifts, weekends and overtime when required
  • High School Degree or GED Equivalent required
  • Must have the ability to stand for up to 4 hours per shift
  • Must have the ability to be seated for up to 4 hours to operate equipment or vehicles
  • Must have the ability to work from elevated positions, walk/climb up and down stairs/steps and climb on and off equipment and ladders
  • Must have the ability to wear required protective footwear, hearing and eye protection, and other personal protective equipment as required by Company and MSHA
  • Must have the ability to perform repetitive hand and wrist motions (push, pull, twist, handle), and have rapid reflex movements of the arms and legs and good hand to eye coordination
  • Must have the ability to lift/raise 10 - 50 lbs. without mechanical assistance frequently during the course of work shift
  • Must have the ability to work in extreme conditions, including but not limited to changing weather conditions, dust, mud, varying levels of noise from low to high, varying degrees of light and dark, in and around artificial light and in a confined work area
  • The job requires that you be able to work various shifts (required shifts include days, evenings and nights with rotating schedules, weekends and holidays
What we offer:

We provide 401K matching, medical, dental and vision health plans with minimal cost to the employee. Benefit eligibility starts on your first day of work

Additional Information:

Job Posted:
December 31, 2025

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Experienced Production Equipment Operator

Experienced Door Shop Machine Operator

We are seeking an experienced Door Shop Employee to join our production team in ...
Location
Location
United States , Phoenix
Salary
Salary:
21.00 - 26.00 USD / Hour
frontierdoor.com Logo
Frontier Door & Cabinet
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 5 years of experience in a pre-hung door production environment
  • Proficient with Norfield door machinery or similar equipment
  • CNC machinery experience, specifically Weeke Point-to-Points, is a strong plus
  • Familiarity with Wood WOP software advantageous
  • Detail-oriented with excellent organizational skills
  • Ability to work effectively both independently and in a team environment
  • Reliable and punctual with a strong work ethic
  • Ability to lift and move materials up to 120 pounds regularly
  • Experience with inventory management and control processes
  • Strong communication skills and ability to coordinate with other departments effectively
Job Responsibility
Job Responsibility
  • Set up and operate door machining equipment (Norfield Magnums, Strike Routers, Eagles)
  • Accurately machine and assemble pre-hung door units weighing up to 120 lbs to precise specifications
  • Maintain machinery, troubleshoot issues, and ensure smooth operations
  • Monitor product quality and ensure adherence to company standards
  • Collaborate effectively with the production team to meet daily output goals
  • Assist with inventory management and maintain accurate records
  • Perform quality control checks and address issues promptly
  • Maintain cleanliness and organization of work area and machinery
  • Read and interpret Bill of Materials (BOMs) and production paperwork
  • Use hand tools and interpret hardware schematics accurately
What we offer
What we offer
  • Competitive pay
  • Supportive work environment
  • Opportunities for growth within our company
  • Ear protection provided
  • Eye protection required at all times
  • Fulltime
Read More
Arrow Right
New

Experienced production dozer/backhoe equipment operator

We are currently seeking an Experienced Production Dozer/Backhoe Equipment Opera...
Location
Location
United States , Wright
Salary
Salary:
Not provided
peabodyenergy.com Logo
Peabody Energy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Three years’ experience operating dozer equipment at a mine site is preferred
  • Ability to solve problems and troubleshoot situations arising in the pit area as needed
  • Ability to operate auxiliary equipment such as forklifts, overhead shop cranes, etc.
  • Ability to work in all types of weather conditions and at different times of day
  • Ability to work a flexible schedule as required by business need
  • Ability to work rotating shifts, weekends and overtime when required
  • High School Degree or GED Equivalent required
  • Must have the ability to stand for up to 4 hours per shift
  • Must have the ability to be seated for up to 4 hours to operate equipment or vehicles
  • Must have the ability to work from elevated positions, walk/climb up and down stairs/steps and climb on and off equipment and ladders
Job Responsibility
Job Responsibility
  • Visibly support and champion Peabody's Mission and Values
  • Act in accordance with and adhere to Safety as a Way of Life Management System
  • Inspect and service equipment
  • Plan digging activities to ensure optimal coal recovery
  • Dig coal and waste to ensure optimal recovery
  • Train more junior production employees
  • Pre-start inspection of equipment and work environment
  • Collect waste and tipping at correct location
  • Monitor the control panel of the equipment to identify and correct malfunctions and service requirements
  • Ensure activities comply with safety, environmental and statutory requirements
What we offer
What we offer
  • 401K matching
  • medical, dental and vision health plans with minimal cost to the employee
  • Benefit eligibility starts on your first day of work
  • Fulltime
Read More
Arrow Right
New

Longwall Operators

Peabody Energy owns and operates this world-class operation, which is on track t...
Location
Location
Australia , Glenden
Salary
Salary:
Not provided
peabodyenergy.com Logo
Peabody Energy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experienced in longwall mining with demonstrated skill operating longwall equipment (shearer, roof supports, AFC, BSL, etc.)
  • Preferably hold current competencies in longwall operations and equipment (e.g. Shearer Operator, Chock Operator)
  • Committed to maintaining and promoting a safe work environment
  • Team player with a strong work ethic and flexible, can-do attitude
  • Tickets for underground equipment such as Bolter, Shuttle Car, Loader, and Drift Runner are advantageous
  • Genuine commitment to safety and demonstrate a sound understanding of risk and hazard identification
  • Exceptional team member with a flexible attitude and sound work ethic
Job Responsibility
Job Responsibility
  • Operating longwall and associated mining equipment following mine plans and safety standards
  • Performing longwall mining tasks including shearer operations, shield movement, face inspections, and tailgate operations
  • Conducting pre-starts, personal risk assessments, and hazard identification activities
  • Contributing to a high-performance culture by supporting production targets and site improvement initiatives
What we offer
What we offer
  • Comprehensive relocation support
  • Competitive remuneration and long-term job security in a Tier 1 project
  • Employee lifestyle benefits
  • Access to novated leasing, WHEREFIT discounts, recognition programs, and Employee Assistance Program
  • Camp accommodation with all the necessary facilities — including gym, quality meals, recreation areas and more
  • Full operational, mechanical, electrical and automation training provided
  • Recognised prior learning opportunities
  • Guided by an experienced and competent management team
  • Fulltime
Read More
Arrow Right

Multiskilled Engineer

An exciting opportunity has arisen to join an expanding Engineering team that pr...
Location
Location
United Kingdom , Suffolk
Salary
Salary:
50000.00 - 53000.00 GBP / Year
cooperlomaz.co.uk Logo
Cooper Lomaz
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A qualified engineer with strong mechanical and electrical skills
  • Knowledgeable in PLCs and process control systems
  • Able to work efficiently under pressure and to tight deadlines
  • Adaptable and responsive to a dynamic work environment
  • Familiar with Continuous Improvement and TPM (Total Productive Maintenance) methods
  • Preferably experienced in a food production setting
  • Self-motivated with the ability to deliver high-quality work independently
Job Responsibility
Job Responsibility
  • Perform plant upgrades, planned maintenance, and support small-scale engineering projects
  • Respond swiftly and effectively to equipment breakdowns
  • Support efforts to increase equipment uptime and operational efficiency
  • Consistently uphold health and safety standards
What we offer
What we offer
  • Competitive salary, reviewed annually
  • Performance-related bonus
  • 5% employer pension contribution
  • Health Cash Plan and rewards scheme
  • 24/7 employee support line
  • Life assurance
  • Flexible working options
  • On-site parking
  • Fulltime
Read More
Arrow Right

Pallet Builder & Repair

Uses automated equipment to build and assemble new pallets. Repairs pre-manufact...
Location
Location
Canada , Acheson
Salary
Salary:
Not provided
mayfairlumber.com Logo
Mayfair Lumber Sales Ltd.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Skilled at operating and understanding the safety features of equipment
  • Visually observe the natural characteristics of the wood and grades wood according to standards
  • Understands safe work procedures and adheres to safety policies
  • Must have the drive to learn and drive to meet standards set
  • Ability to stand for 6 to 8 hours on a given work site
  • Physical height of 5’6” when operating automated pallet equipment
  • Respectful communicator
  • Working knowledge of Mayfair’s Safety Manual and Safe Work Practices
Job Responsibility
Job Responsibility
  • Uses automated equipment to build and assemble new pallets
  • Repairs pre-manufactured pallets for re-use and re-sale
  • Identifies potential hazards before the shift begins
  • Understands scope of work at the start of each shift as well as production target
  • Ability to read custom orders and understand the design of the pallet
  • Uses pallet binding machine to stack pallet orders
  • Assembles wood and wood products and stacks them for temporary storage
  • Operates machinery often hydraulic
  • electric and pneumatic required for assembly
  • Uses bander machine to package and stack orders
  • Fulltime
Read More
Arrow Right

Maintenance Supervisor

As a Maintenance Supervisor, you will be responsible for the planning, coordinat...
Location
Location
United States , South Salt Lake
Salary
Salary:
38.00 - 48.00 USD / Hour
torus.co Logo
Torus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/Equivalent and 2-5+ years of related experience
  • Proficient experience in manufacturing machine setup, operation, and troubleshooting (e.g. press brake, panel bender, laser cutter, lathe, etc)
  • Possess a strong understanding of various maintenance disciplines, such as electrical, PLCs, motor controls, pneumatics, hydraulics, motors and pumps
  • Drives operational excellence through meticulous attention to equipment performance and quality assurance standards
  • Comprehensive understanding of mechanical systems and standard and preventive machine maintenance procedures
  • Knowledge and experience in high-voltage and low-voltage electrical assemblies and wiring, as well as mechanical assemblies
  • Familiarity with electrical and mechanical components, tools, and equipment commonly used in manufacturing. Knowledge may be gained through education, training or experience
  • Experienced in interpreting blueprints and technical documentation to ensure proper equipment servicing
  • Prior experience supervising staff, as the role is expected to evolve into a team leadership position
  • Excellent communication and teamwork skills that enable effective and proactive problem-solving
Job Responsibility
Job Responsibility
  • Oversee the execution of maintenance activities, ensuring they are completed efficiently and effectively
  • Plan, schedule and execute maintenance, repair and renovation tasks and workloads based on production priorities and equipment requirements
  • Effectively troubleshoot and diagnose equipment problems
  • Develop and implement preventive maintenance programs
  • Ensure that all maintenance activities are executed to the highest standard
  • Prioritize maintenance tasks based on urgency and impact on operations
  • Inspect facilities and equipment to identify potential issues and maintenance needs
  • Prepare weekly maintenance schedules and allocate team support to each task
  • Collaborate with cross-functional teams, including engineers, supervisors, and other technicians, to optimize manufacturing processes and address any technical challenges or issues that arise
  • Maintain accurate records and reports of maintenance activities using maintenance management software and tools
What we offer
What we offer
  • Employee Rewards Package including equity
  • 401(k) Retirement Savings Plan
  • Health Benefits Package: Choice between traditional PPO or HSA eligible medical plans
  • Dental insurance
  • and Vision insurance
  • Human-centered Paid Time Off (based on employment status) including unlimited discretionary PTO or 10 days accrued PTO
  • 10-days paid company holidays
  • Waiting period-free 100% paid parental leave
  • Torus paid Life and AD&D Insurance with option to purchase additional coverage
  • Voluntary Short- and Long-Term Disability Insurance
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
United States , Batesville
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • medical and dental coverage
  • insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...
Location
Location
United States , Batesville, Indiana
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan with options for employee contributions and company matching
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right
Welcome to CrawlJobs.com
Your Global Job Discovery Platform
At CrawlJobs.com, we simplify finding your next career opportunity by bringing job listings directly to you from all corners of the web. Using cutting-edge AI and web-crawling technologies, we gather and curate job offers from various sources across the globe, ensuring you have access to the most up-to-date job listings in one place.