CrawlJobs Logo

Engineering Technician III

United States, Virginia Beach Employment contract 22.25 - 31.25 USD / Hour · Job Posted July 03, 2026
Apply Position
Job Link Share

Job Description

Monitoring drilling projects, perform field inspections and test procedures for geotechnical engineering projects. Field classify soils and collect detailed data for geotechnical engineering projects. Communicate with project manager, drillers, client representative, others as applicable. Field activities will include by not be limited to monitoring standard penetration test (SPT), cone penetration test (CPT), performing dynamic cone penetration (DCP) testing, field infiltration testing, site reconnaissance, marking boring locations and collecting groundwater depth measurements. Work is expected to be primarily performed Monday through Friday during normal business hours (7am to 5pm). Specific projects may extended work hours or require night and weekend work. Adhere to strict safety standards.

Job Responsibility

  • Monitoring drilling projects, perform field inspections and test procedures for geotechnical engineering projects
  • Field classify soils and collect detailed data for geotechnical engineering projects
  • Communicate with project manager, drillers, client representative, others as applicable
  • Field activities will include by not be limited to monitoring standard penetration test (SPT), cone penetration test (CPT), performing dynamic cone penetration (DCP) testing, field infiltration testing, site reconnaissance, marking boring locations and collecting groundwater depth measurements
  • Adhere to strict safety standards
  • Follow safety rules, guidelines and standards for all projects
  • Participate in pre-task planning
  • Report any safety issues or concerns to management
  • Maintain quality standards on all projects
  • Assist in research, data collection, field observation, inspection, and field and laboratory testing
  • Prepare associated reports or sections of larger reports
  • Evaluate mostly routine laboratory and field data for inclusion in reports
  • Consult with other technical people and supervisor on routine and less complex projects
  • May perform basic calculations and engineering analysis
  • Drafts routine proposals and assists in the preparation of more complex proposals
  • Performs plan drafting using CAD software
  • May work with engineering technician crews in testing, observations and data gathering activities on project sites and prepare daily reports documenting activities and findings
  • Works under the supervision of a Professional Engineer.

Requirements

  • High school diploma or equivalent
  • Minimum 3-5 years of relevant experience or the equivalent in training and related experience
  • Experience with laptop computer use and Microsoft Word and Excel
  • Valid driver’s license with acceptable violation history.

Nice to have

  • WACEL, VDOT, ACI, or NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils, Foundations, Masonry
  • ICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel – Bolting, Structural Steel – Welding
  • Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager.

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Engineering Technician III

8 matching positions

Engineering Technician III

We are launching people to the Moon and Mars. If you want to be part of this ama...
Location
Location
United States , Kennedy Space Center
Salary
Salary:
65000.00 - 70000.00 USD / Year
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or equivalent and technical training in the applicable area of expertise and eight years of related experience including experience directing other technicians
  • Must have a US driver's license
  • An AS Degree or higher in Aerospace Technologies or related experience working within the aerospace field is suggested
  • Applicable license: Air-frame & Power-plant (A&P) License
  • Directly related experience is considered as having worked on Solid Rocket Boosters, Core Stage Systems, or Rocket Engines (Assembly, Testing or Fueling for launch)
  • Must be able to accurately communicate ideas in writing and verbal communication
  • Must be able to travel to support position requirements
  • Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others
  • Must comply with all drug free workplace requirements
  • Must maintain a positive work atmosphere by behaving and communicating in a manner that fosters good relations with customers, clients, co-workers, and management
Job Responsibility
Job Responsibility
  • Execute work assignments in MAXIMO or Solumina while maintaining the technical certifications and training to complete daily work assignments
  • Serve as a team member in various roles (Task Team Leader, facilitator, support technician, skilled helper)
  • Periodically provide task status to the Systems Engineer, Area Integrator (AI) and Management Staff
  • Ensure each job is carried out with a high level of quality while employing safety and clean as you go standards
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Child Development Center
  • Fulltime
Read More
Arrow Right

Engineering Technician III

Applies engineering techniques and principles to develop, design, modify, instal...
Location
Location
United States , Lexington Park
Salary
Salary:
65000.00 - 70000.00 USD / Year
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED
  • Successful completion of a technical school, trade school, advanced armed services technical training curriculum or course of training in electricity, electronics, avionics, mechanics, armaments/ordnance, or engineering technology
  • OR successful completion of at least 15 semester hours of course studies in an engineering, scientific or technical curriculum
  • Minimum of four (4) years’ experience in the area of aircraft and weapon systems, hardware, instrumentation or software development
  • TS/SCI clearance
Job Responsibility
Job Responsibility
  • Applies engineering techniques and principles to develop, design, modify, install, test, evaluate or operate electrical, electronics, avionics, mechanical, communications or related data processing systems for military rotary wing aircraft or associated support equipment and facilities
  • Provides support for maintenance, repair, inspection and troubleshooting of system equipment or components
  • Organizes, analyzes and prepares reports and presentations of technical data
  • Plans and performs tests and evaluations of system equipment or components
  • Compiles, processes, and analyzes test data and results
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

Engineering Technician III

The Engineering Technician III is responsible for performing advanced prototype ...
Location
Location
United States , Burlingame
Salary
Salary:
36.00 - 55.00 USD / Hour
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED required
  • Associate’s degree preferred
  • 5+ years hands-on experience in engineering or R&D support
  • Proficient with electrical and mechanical assembly, soldering (including fine-pitch), and lab test tools
  • Able to work from minimal documentation and contribute to its improvement
  • Demonstrated mentoring, troubleshooting, and documentation skills
  • Strong working knowledge of prototyping standards and safety practices
  • IPC certification preferred
  • Strong written and verbal English language communication skills
  • Excellent teamwork/interpersonal skills and the ability to communicate effectively
Job Responsibility
Job Responsibility
  • Lead complex prototype builds involving electromechanical systems
  • Develop solutions to test and build challenges
  • escalate only unresolved issues
  • Conduct root-cause analysis and provide detailed reporting
  • Build and improve test fixtures and proof-of-concept assemblies
  • Support process improvement initiatives within the technician team
  • Train and guide Engineering Technician I/II personnel
  • Ensure quality and timeliness of assigned work
  • Follow Business Technology policies to protect sensitive data and reduce information security occurrences
What we offer
What we offer
  • 401(k) with up to 4% company match
  • quarterly bonus program
  • 15-days of accrued PTO
  • 9 company paid holidays
  • multiple options for medical insurance
  • dental insurance
  • voluntary benefits: vision, long-term disability, and life insurance
  • Fulltime
Read More
Arrow Right

Engineering Technician III

The Engineering Technician III is responsible for performing electrical, mechani...
Location
Location
United States , Jefferson
Salary
Salary:
Not provided
energysystems.com Logo
Energy Systems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma
  • 5 Years of relevant work experience
  • Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear
  • and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel.
Job Responsibility
Job Responsibility
  • Setup test equipment and products in proper sequence per testing procedures
  • Perform tests on prototypes, existing, and competitor products for stated criteria involving mechanical, electrical, environmental, and electromechanical functions through ISO 17025 and Laboratory Scope of Operations
  • Use various mechanical, electrical, and electronic measurement devices
  • Accurately interpret and document scientific notation, temperature, pressure, and other measurements
  • Assists in the assembly and fabrication of test equipment and prototype products per blueprint specifications
  • Follow guidelines for bill of materials
  • Support manufacturing through troubleshooting activities
  • Maintain test-related documentation in, and support administration of, database environment
  • Prepare formal and informal test reports
  • Assist with the Generac Engineering Laboratory Audit and organization 5S programs
  • Fulltime
Read More
Arrow Right

Engineering Technician III

Sigma Design has collaborated with a global leader in audio technologies enginee...
Location
Location
United States , Camas
Salary
Salary:
75000.00 - 90000.00 USD / Year
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED equivalent, or equivalent industry experience required
  • 5+ years of experience in electrical prototype environments
  • Deep understanding of schematics, component function, and test strategy
  • Experience working with audio components including amplifiers
  • Fluent in test data acquisition, electrical characterization, and debug workflows
  • Skilled in rework, modification, and detailed documentation
  • Strong collaboration and cross-functional communication skills
  • Demonstratable leadership through initiative and mentoring
  • Strong written and verbal English language communication skills
Job Responsibility
Job Responsibility
  • Perform complex prototype builds and test setups from minimal documentation
  • Perform hands on assembly, soldering, and troubleshooting of electronic audio components
  • Conduct characterization testing and produce test reports
  • Suggest design improvements and influence development activities
  • Manage quality, timeline, and delivery of assigned tasks
  • Shadow Sr. Electrical Engineer and gain hands on experience with design processes and development methods
What we offer
What we offer
  • 401(k) with 4% company match
  • 100% employer-paid health insurance (employee and family coverage)
  • Relocation assistance available for qualified candidates
Read More
Arrow Right

Engineering Technician III, Quality Manager

Responsible for the overall quality system and its implementation and management...
Location
Location
Kuwait , Kuwait City
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • An associate’s degree in engineering, engineering technology, physics or a related technical field from an accredited college or university, with at least ten (10) years of field experience. Includes qualification requirement OR Completion of a U.S. military precision measurement and calibration program, a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and have twelve (12) years of work experience in the calibration field with extensive experience in QA. Includes qualification requirement C
  • Demonstrated knowledge of the requirements of calibration laboratory compliance and accreditation to ISO 17025
  • Must have or be able to obtain and maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance
Job Responsibility
Job Responsibility
  • Responsible for the overall quality system and its implementation and management for the KAF Metrology Program
  • Exercises independent judgment on issues concerning ISO 17025 and KAF related Quality documents
  • Performs trend analysis quarterly
  • Develops and maintains the laboratory quality manual and quality system using KAF command directives and standardized templates
  • Assessing requirements, developing and maintaining a complete QA Program for the KAFMB
  • Developing and maintaining a Quality Control program that ensures a high-quality product from all sections of the KAFMB
  • Coordinating with KAF management, QA, Laboratory Supervisors and Inspectors, Material/Production Control personnel and technicians to resolve problems and ensure an integrated effort
  • Develop, maintain, and implement a Quality Assurance Program as per ISO 17025 directives that ensures involvement of all management and technical levels in the implementation, updating and utilization of a quality-oriented program at the KAFMB labs
  • Developing a QA Program for laboratory facility and related environmental control, development, operation and maintenance
  • Assisting the Metrology Engineering Department in researching and developing a Primary Standards capability
  • Fulltime
Read More
Arrow Right

Fine Soldering Engineering Technician III

The Engineering Technician III is responsible for executing complex prototype bu...
Location
Location
United States , Camas
Salary
Salary:
75000.00 - 90000.00 USD / Year
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED equivalent, or equivalent industry experience required
  • 5+ years of experience in electrical prototype environments
  • Solid experience with fine soldering
  • Deep understanding of schematics, component function, and test strategy
  • Experience working with audio components including amplifiers
  • Fluent in test data acquisition, electrical characterization, and debug workflows
  • Skilled in rework, modification, and detailed documentation
  • Strong collaboration and cross-functional communication skills
  • Demonstratable leadership through initiative and mentoring
  • Strong written and verbal English language communication skills
Job Responsibility
Job Responsibility
  • Perform complex prototype builds and test setups from minimal documentation
  • Perform hands on assembly, soldering, and troubleshooting of electronic audio components
  • Conduct characterization testing and produce test reports
  • Suggest design improvements and influence development activities
  • Manage quality, timeline, and delivery of assigned tasks
  • Shadow Sr. Electrical Engineer and gain hands on experience with design processes and development methods
What we offer
What we offer
  • 401(k) with 4% company match
  • 100% employer-paid health insurance (employee and family coverage)
  • Relocation assistance available for qualified candidates
Read More
Arrow Right

Engineering Technician III - DC/Low Frequency

Provides training and advice for repair, calibration, and modification of the wi...
Location
Location
Kuwait , Al Jahra
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in electronics technology from an accredited school, and ten (10) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards, with a working knowledge of the basic concepts of electronics and science
  • Completion of a U.S. military precision measurement and calibration program, a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic TMDE such as analog and digital multimeters, electronic counters, function generators, signal generators, analog and digital tape recorders, oscilloscopes, spectrum analyzers, and calibration laboratory measurement standards
  • Demonstrated experience in troubleshooting TMDE and measurement standards by making measurements with test equipment to identify problems at the component level
  • Demonstrated basic electronic construction and repair skills, including soldering and wiring, and the ability to perform these functions on delicate circuit cards
Job Responsibility
Job Responsibility
  • Provides training and advice for repair, calibration, and modification of the wide variety of complex precision measurement equipment utilized by the GOK activities
  • Provides technical and procedural advice and guidance to KAF personnel and other GOK personnel concerning metrology-related matters such as the repair, calibration, or modification of precision measurement equipment, the conduct of laboratory operations, and the resolution of customer measurement problems
  • Provides in-depth technical expertise in one or more of the following disciplinary categories and can provide OJT or formal classroom training as required
  • Performs precision measurements, calibrations, modifications, maintenance and repair actions, and other functions as necessary in all areas of laboratory operations
  • Assists in obtaining and maintaining laboratory QA accreditation
  • Fulltime
Read More
Arrow Right