CrawlJobs Logo

Engineer, R&D

https://www.baxter.com/ Logo

Baxter

Location Icon

Location:
Malta , Marsa

Category Icon
Category:
Research and Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

27200.00 EUR / Year
Save Job
Save Icon
Apply Position

Job Description:

This is where new knowledge is discovered. Baxter’s Research and Development teams work cross functionally to innovate, develop and introduce creative solutions for patients needs globally. From Scientists to Engineers, your work creates the products that save and sustain lives.

Job Responsibility:

  • Performs routine engineering assignments of related tasks which are typically a focused portion of larger projects
  • These tasks provide experience and familiarization with the engineering staff, methods, techniques, theories, Corporate and division SOP's, policies and projects
  • Document development work including writing specifications for manufacturing or scientific test results
  • Ability to solve routine design and engineering tasks with some assistance
  • Able to solve problems with periodic monitoring
  • Assists in the preparation and participation in technical reviews and responsible for organizing data and preparing appropriate documentation for assigned projects
  • Ability to discuss normally encountered technical or project management issues, both verbally and in written form
  • Ability to work as a collaborative team member
  • Ability to solve routine design, engineering problems with assistance
  • Acts independently with minimal supervision to conduct smaller approved projects
  • Expected to make suggestions on improvements based on recent technical knowledge
  • Contributes to the planning and execution of components of the development process, which apply to product revision or enhancement
  • Employs appropriate techniques and methods to successfully conduct specific assignments within negotiated deadlines after receiving general instruction
  • Demonstrates working knowledge of basic technical theories and principles within area of expertise for routine tasks
  • Assesses feasibility of simple research and design concepts within area of expertise.

Requirements:

  • Bachelor of Engineering (Hons)
  • 0 – 3 years related experience (in-house, co-op or acquired outside).
What we offer:
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer

Additional Information:

Job Posted:
May 05, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Baxter - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Engineer, R&D

R&D Engineer

Formlabs is looking for highly motivated individuals to join us as we bring grou...
Location
Location
United States , Somerville
Salary
Salary:
95000.00 - 140000.00 USD / Year
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Questions assumptions and are willing to back it up with data
  • Have experience with experiment design and data analysis to inform design decisions
  • Able to design and build test fixtures for experiments
  • A website or portfolio document showing off your current and past projects
  • Understand programming and scientific computing, ideally Python or Matlab
  • Familiar with mechanical design, mechatronics, and CAD modeling
  • B.S., M.S., or PhD in an engineering field (all are welcome)
Job Responsibility
Job Responsibility
  • Create new 3D printing techniques - from developing new printer architectures to validating minute changes in Galvo control
  • Opportunity to contribute to investigating new technologies
  • Tackle complex and open-ended problems across multiple engineering disciplines
  • Perform experiments and use the results to inform and develop improvements in software or hardware
  • Evaluate current printer performance for areas for improvement
  • Partner with other engineering teams to implement improvements to current products such as redesigning support structure algorithm based on experimental results
What we offer
What we offer
  • Robust equity program to build future wealth through RSUs
  • Comprehensive healthcare coverage (Medical, Dental, Vision)
  • Low cost fund options in our 401K and access to advisors
  • Generous paid Parental Leave (up to 16 weeks)
  • Tenure-based paid Sabbatical Leave (up to 6 weeks)
  • Flexible Out of Office Plan – Take time when you need it
  • Ample on-site parking & pre-tax commuter benefits
  • Healthy on-site lunches, snacks, beverages, & treats
  • Regular sponsored professional development opportunities
  • Many opt-in culture events across our diverse community
  • Fulltime
Read More
Arrow Right

Senior 3D Printing R&D Engineer

To reinvent an industry, you have to build the best team. Join Formlabs if you w...
Location
Location
United States , Boston
Salary
Salary:
130000.00 - 185000.00 USD / Year
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3+ years post-graduate experience
  • Questions assumptions and are willing to back it up with data
  • Autonomously works to research, report results, and make recommendations for next steps
  • Able to design and build test fixtures for experiments
  • Have experience with experiment design and data analysis
  • A website or portfolio document showing off your current and past projects
  • Understand programming and scientific computing, ideally Python or Matlab
  • Familiar with mechanical design, mechatronics, and CAD modeling
  • B.S., M.S., or PhD in an engineering field (all are welcome)
Job Responsibility
Job Responsibility
  • Create new 3D printing techniques - from developing new printer architectures to validating minute changes in Galvo control
  • Opportunity to lead projects and investigate new technologies
  • Tackle complex and open-ended problems across multiple engineering disciplines
  • Perform experiments and use the results to inform and develop improvements in software or hardware
  • Evaluate current printer performance for areas for improvement
  • Partner with other engineering teams to implement improvements to current products such as redesigning support structure algorithm based on experimental results
What we offer
What we offer
  • Robust equity program to build future wealth through RSUs
  • Comprehensive healthcare coverage (Medical, Dental, Vision)
  • Low cost fund options in our 401K and access to advisors
  • Generous paid Parental Leave (up to 16 weeks)
  • Tenure-based paid Sabbatical Leave (up to 6 weeks)
  • Flexible Out of Office Plan – Take time when you need it
  • Ample on-site parking & pre-tax commuter benefits
  • Healthy on-site lunches, snacks, beverages, & treats
  • Regular sponsored professional development opportunities
  • Many opt-in culture events across our diverse community
  • Fulltime
Read More
Arrow Right

Technical engineer r&d

Are you passionate about innovation, sustainability, and turning ideas into real...
Location
Location
Czech Republic
Salary
Salary:
Not provided
pfnonwovens.com Logo
PFNonwovens LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Higher education in chemistry or textile
  • Also suitable for graduates
  • Focus or experience in polymer chemistry or nonwovens an advantage
  • Knowledge of testing, statistical methods, production and processing of nonwovens an advantage
  • Communicative knowledge of English and professional knowledge of Czech (at least C1 level)
  • Good communication skills
  • Willingness to travel
Job Responsibility
Job Responsibility
  • Independent execution of sub-projects contributing to innovation and product commercialization
  • Cooperation on long-term development projects aimed at reducing the environmental impact
  • Addressing complex challenges in project management
  • Building expertise in product innovation, with the opportunity to grow further in the field of interest (project work, patents, sustainability, compliance …)
  • Global collaboration with external partners from industrial and academic sector
What we offer
What we offer
  • Fair financial remuneration
  • Motivating salary + generous benefits package
  • Home office and flexible working hours
  • 5 weeks of vacation
  • Reduced working hours of 7.5 hours
  • Further professional education and training
  • Relocation support
  • Meaningful, diverse work and a great team of inspiring people
  • Opportunities for personal and professional growth
  • Company meals and a range of other benefits
  • Fulltime
Read More
Arrow Right

Principal R&D Engineer

Silvus is seeking a Principal R&D Engineer who will report to the Vice President...
Location
Location
United States , Los Angeles
Salary
Salary:
180000.00 - 250000.00 USD / Year
silvustechnologies.com Logo
Silvus Technologies (International)
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • MS. or Ph.D. in Electrical Engineering, Computer Engineering, or a related communication and/or engineering technology field (i.e., wireless communications, signal processing, networking, RF design, etc.)
  • Minimum 10 years of experience in the design and development of wireless systems
  • 5 years of demonstrated experience in technical project leadership (i.e., principal investigator)
  • Participation in the complete technology development cycle: design to field testing
  • Must be a U.S. Citizen due to clients under U.S. government contracts
  • All employment is contingent upon the successful clearance of a background check
Job Responsibility
Job Responsibility
  • Technical management of Research and Development projects and programs
  • Responsibility for overall system design and requirement specification
  • Setting and tracking development schedules and tasks
  • Participating in the hands-on design, simulation, and verification work
  • Overseeing relevant simulation, software, FPGA, and testing efforts
  • Customer-facing engagement and technical material preparation when needed
  • Reporting to management, as required for strategic planning and assessment
  • Participate in Research and Development business development and capture efforts
  • Whitepaper and proposal preparation
  • Understand current technology and pitch future enhancements and strategies
  • Fulltime
Read More
Arrow Right

R&D Engineer II - Surgical Development

The R&D Engineer II – Surgical Development will lead efforts in designing, proto...
Location
Location
United States , Salt Lake City
Salary
Salary:
Not provided
blackrockneurotech.com Logo
Blackrock Neurotech
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS in Biomedical, Mechanical or related Engineering discipline
  • Experience in preclinical surgery or surgical R&D
  • Familiarity with the surgical workflows and basic understanding of anatomy and physiology
  • Strong skills in CAD design, prototyping and bench testing
  • Excellent documentation skills
  • Ability to work in fast-paced multidisciplinary environments
Job Responsibility
Job Responsibility
  • Drive development of surgical delivery systems, implantation techniques, and surgical support tools
  • Collaborate closely with surgeons and clinical partners to gather user needs and feedback
  • Design and test prototypes for usability, ergonomics, and surgical compatibility
  • Conduct preclinical studies to validate surgical approaches, ensuring safety and efficacy
  • Support failure analysis and design improvements based on preclinical/clinical observations
  • Prepare and maintain surgical protocols, technical reports, and risk documentation (per ISO 13485 and ISO 14971)
  • Contribute to training materials and surgeon-facing documents for new device procedures
  • Liaise with cross-functional teams including systems engineering, regulatory, and clinical affairs
  • Help setting up validated sterilization abilities in-house
  • Data presentation
  • Fulltime
Read More
Arrow Right

Hardware R&D Engineering Intern

Internships at Formlabs give students the opportunity to create, build, solve, a...
Location
Location
United States , Somerville, MA
Salary
Salary:
Not provided
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A portfolio of your previous engineering work/projects is required
  • Are willing to question assumptions and back it up with data
  • Are able to work autonomously to research
  • Have experience with experiment design and data analysis
  • Understand programming and scientific computing, ideally Python or Matlab
  • Are familiar with mechanical design, mechatronics, CAD modeling, and hands-on prototyping
  • Previous work on a consumer product
  • Developed physics-based models of complex systems
Job Responsibility
Job Responsibility
  • Design, build, and innovate new 3D printing techniques - from developing new printer architectures to validating minute changes in galvo control
  • Work across teams to help implement improvements to current products such as redesigning support structure algorithm based on experiment results
  • Evaluate current printer performance for areas for improvement
  • Design and execute experiments and use results to inform and develop improvements in software or hardware
  • Tackle complex and open-ended problems across multiple engineering disciplines
What we offer
What we offer
  • Flexible Out of Office Plan – take time when you need it
  • Ample on-site parking & pre-tax commuter benefits
  • Catered on-site lunches (3x per week), snacks, beverages, & treats
  • Cohort-based social and professional development experience for interns
  • Many opt-in culture events across our diverse community
  • unlimited 3D prints
  • Fulltime
Read More
Arrow Right

Senior R&D Engineer, Catheters

We are hiring a Senior R&D Engineer to join our team and play a critical role in...
Location
Location
United States , Lake Forest
Salary
Salary:
100000.00 - 130000.00 USD / Year
m4dllc.com Logo
Manufacturing For Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in mechanical or biomedical engineering or equivalent experience
  • 3-10 years industry experience with a medical device company
  • Demonstration of excellent communication (written and oral) skills
  • Demonstration of excellent organizational skills with the ability to adapt to a rapidly changing environment
  • Prior experience with non-invasive medical devices (catheters)
  • Ability to present/teach detailed technical information, to all levels of company personnel and customers
Job Responsibility
Job Responsibility
  • Provide technical leadership for the design and development of medical devices
  • Assist in the transfer of new products from R&D to production
  • Establish processes and manufacturing documentation for new catheter products
  • Identify processes/materials to fabricate new products
  • Use CAD software (Solidworks preferred) for part and assembly design and detail drawings
  • Perform experiments to determine validity of designs
  • Provide technical leadership for development projects
  • Define product requirements
  • Design and development of tooling
  • Perform or manage design verification, equipment qualification and product and process validations
What we offer
What we offer
  • Medical Insurance, Dental Insurance, and Vision Insurance, 100% paid for employee
  • 401K Plan
  • Fulltime
Read More
Arrow Right

Associate R&D Test Engineer

Silvus is seeking a full-time Associate R&D Test Engineer to report to the R&D D...
Location
Location
United States , Los Angeles
Salary
Salary:
70000.00 - 85000.00 USD / Year
silvustechnologies.com Logo
Silvus Technologies (International)
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED with 3 years of experience in electronics work environment
  • Associate degree with 1 year of experience
  • Bachelor or higher degree from an accredited university or college
  • Familiarity and experience working in testing embedded systems
  • Exposure to the use of RF instruments such as signal generators, spectrum analyzers, and channel emulators
  • Must be a U.S. Person (permanent resident or citizen)
  • Must be able to lift up to 50 lbs.
  • Must be able to perform bending, reaching, kneeling, squatting, walking/moving
Job Responsibility
Job Responsibility
  • Wireless communication system test operation, implementation, and maintenance
  • Assist in the maintenance, design, and implementation of testing software for automated testing and logging
  • Work closely with the rest of the R&D and Engineering teams to understand performance requirements and expected system behaviors, validate and assist in troubleshooting and qualification of new designs
  • Conduct lab testing using wireless channel emulators and other instruments
  • Conduct field testing to qualify system performance in a practical environment
  • Occasional domestic travel to support experimentation and demonstration
What we offer
What we offer
  • Reasonable accommodation for individuals with disabilities
  • Fulltime
Read More
Arrow Right