Engineer - NDT Job at Nordex Group (Chennai)

NDT Engineer

We are seeking experienced NDT Engineers with specific pressure systems knowledg...

Location

United Kingdom , Derby

Salary:

Not provided

Risktec Solutions

Expiration Date

Until further notice

Requirements

Good practical experience in the inspection of a range of plant components, in particular steam and water pressure parts (both in the new / as-installed condition and after in-service degradation has taken place)
An appreciation of the damage / degradation mechanisms that can take place on the components being inspected
Working in conventional power or clean energy sectors (primarily CCGT, Biomass and Energy from Waste plants)
As a minimum you must hold PCN Level 2 certification in magnetic particle testing, penetrant testing and ultrasonic testing of welds

Job Responsibility

Site visits to carry out plant inspections
Coordinating / supervising inspection activities e.g. on outages (depending on qualifications and experience)
Producing high quality inspection reports
Reviewing and authorising inspection reports (depending on qualifications and experience)
Estimating and managing project costs
Maintaining up-to-date knowledge of standards, legislation, good practice, methods and use of appropriate equipment and software
The role will involve travel, both within the UK and abroad, to meet project requirements

What we offer

Profit Share
Pension (7.5% company contribution)
Life Assurance
Permanent Health Insurance
Private Medical Insurance
Employee Assistance Programme
Flexible Leave
Flexible Working
Employee Discounts
Salary Sacrifice Options

Fulltime

Field Engineer - Welding Inspector (NDT)

Role: Field Engineer - NDT Welding Inspector. Position: Contract. Location: Hink...

Location

United Kingdom , Bridgwater

Salary:

350.00 - 475.72 GBP / Day

Rullion

Expiration Date

Until further notice

Requirements

CSWIP 3.1 Welding Inspector certification minimum
PCN-certified NDT qualification(s)
Experience in welding inspection on large construction projects
Background in nuclear, power, petrochemical, oil & gas or other regulated industries
Strong understanding of: RCC-M, ASME, BS EN standards
Experience with: ITPs, NCRs, QA/QC documentation, Quality surveillance activities

Job Responsibility

Conduct welding and NDT quality surveillance activities on site
Review contractor compliance against approved Quality Control Plans and ITPs
Identify non-conformances and support NCR generation
Ensure inspection records are completed before works are covered up
Monitor welding, fabrication and installation activities against required standards
Support proactive quality issue identification and mitigation
Liaise with construction, QA/QC and contractor teams across site
Ensure formal quality processes are followed at all times

What we offer

Competitive day rate
36 days annual leave
Long-term contract potential
Opportunity to contribute to the UK's most complex and high-profile clean energy project
Work alongside some of the most skilled professionals in the industry
Gain exposure to cutting-edge construction and engineering methods
Develop your career within one of the world's most demanding project environments

Fulltime

NDT Level III Technician/ Engineer

X-Bow Systems is seeking a highly skilled and experienced NDT Level III Technici...

Location

United States , Luling

Salary:

Not provided

X-Bow Systems

Expiration Date

Until further notice

Requirements

BS in Engineering, Materials Science, or a related technical field (preferred, equivalent experience may be considered)
Minimum of 10 years of experience in NDT, with at least 5 years in X-Ray and CT Scan methods
Previous certification as an NDT Level III in X-Ray (RT) and CT Scan in accordance with ASNT SNT-TC-1A, NAS 410, or equivalent standards
In-depth knowledge of X-Ray and CT Scan NDT principles, techniques, and equipment
Proficiency in interpreting codes, standards, and specifications (e.g., ASME, ASTM, ISO, MIL-STD)
Experience with digital radiography (DR), computed radiography (CR), and advanced CT imaging systems
Strong understanding of material properties, manufacturing processes, and defect mechanisms
ASNT Level III certification in Radiographic Testing (RT) and CT Scan or equivalent certification (e.g., NAS 410)
Radiation safety certification or training in compliance with applicable regulations
Excellent problem-solving and analytical skills

Job Responsibility

Develop, review, and approve X-Ray and CT Scan NDT procedures, techniques, and work instructions
Provide technical guidance and oversight for X-Ray and CT Scan NDT operations
Serve as the subject matter expert (SME) for X-Ray and CT Scan NDT methods and technologies
Oversee and perform advanced X-Ray and CT Scan inspections
Interpret and evaluate X-Ray and CT Scan results
Ensure proper calibration, maintenance, and operation of X-Ray and CT Scan equipment
Mentor Level I and Level II NDT personnel in X-Ray and CT Scan methods
Conduct periodic evaluations and re-certifications
Develop and deliver training programs
Ensure all X-Ray and CT Scan NDT activities comply with applicable industry standards, customer requirements, and safety regulations

Fulltime

New

Area Construction Superintendent

Location

China , Shanghai

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering (Mechanical, Civil, Electrical, or related discipline) or equivalent
Minimum of 10+ years of experience in construction quality management, with at least 3 years in a leadership role in FPSO, oil & gas, or marine construction
Strong knowledge of quality management systems (e.g., ISO 9001), HSE standards, and industry codes related to FPSO construction (e.g., ASME, API, ASTM)
Extensive experience in construction quality control (CQC) and assurance, including the management of inspections, testing, and non-conformance management
Knowledge of FPSO design, fabrication, installation, and commissioning processes
Familiarity with project management software and tools
Strong technical background with the ability to understand complex technical drawings, specifications, and construction processes
The Construction Quality Manager will be required to work on-site and travel as needed to various construction yards or offshore locations
The position requires a strong commitment to health, safety, and environmental (HSE) practices

Job Responsibility

Develop, implement, and manage the Construction Quality Management Plan (CQMP) for FPSO projects, ensuring alignment with client requirements, industry standards, and regulatory requirements
Ensure quality control procedures are aligned with the overall project quality strategy, promoting continuous improvement across all construction phases
Promote a culture of quality within the project teams, ensuring that quality awareness is maintained throughout all stages of construction
Oversee quality control activities related to construction processes, including fabrication, assembly, installation, and commissioning of FPSO units
Monitor and manage inspections, material certifications, welding, NDT, dimensional control, Ex, coating, and testing to ensure compliance with project specifications and regulatory standards
Develop and implement the Inspection and Test Plans (ITPs), and ensure that all non-conformance reports (NCRs) are properly documented and addressed
Prepare and deliver regular quality performance reports to senior management and clients, highlighting key quality issues, corrective actions, and improvements
Collaborate with other departments (e.g., engineering, procurement, safety) to ensure that quality standards are incorporated into all phases of the project
Proactively propose and implement process improvements to enhance quality performance and reduce rework or defects during construction findings, inspection reports, and non-conformance documentation to senior managment and clients

New

Construction Supervisor (Piping)

Vacancy Overview: Construction Supervisor (Piping). Airswift is an international...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor's Degree or Diploma in Mechanical Engineering from an internationally recognized University
Preferably having formal training in QA/QC functional aspects
Candidate shall be a safety leader
Candidate should have a minimum of 10 years overall experience in piping erection (UG & AG), pressure testing, mechanical completion and construction of oil and gas facilities
Experience as an EPIC Contractor supervisor is essential
Experience as a Client or PMC supervisor is preferred
Current experience in State of Qatar industrial cities and/or other GCC countries is required
Piping inspection and rotating equipment experience is an advantage
Extensive knowledge of international and industry specific piping codes and standards, including ASME, ANSI B31.3 & B31.1, SHELL DEP's, etc.
Piping, Welding / NDT inspector certificates (AWS / ASNT / CSWIP / API) would be an advantage

Job Responsibility

Acts as a safety leader, ensuring EPIC Contractor's work in compliance to Company Life Saving Rules and all safety and environmental regulations of Company and the State of Qatar
Reporting to the Discipline Construction Lead/Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendation for improvement
Assist functional supervisor in review and / or approval of Construction documentation, including Method Statements, JHAs, MARs etc., and attend HSE Walkthroughs
Supervise all EPIC contractors piping (Process and Utility piping system with various material pipe classes for above ground & underground piped services) installation activities are based on approved the engineering documentation and project schedule
Attend Requests For Inspections (RFIs) as per approved ITPs, including Material Receiving Inspections in coordination with Reconstruction Supervisor, and sign off relevant inspection and test reports / RFIs
Ensuring the quality of manufacturing and erection works, dimensional accuracy and orientation, accessory and inline items installed in the correct orientation and material design specification
Lead the EPIC construction contractor(s) on all mechanical aspects of the piping works
Supervise with EPIC contractor during execution of the piping installation, line check, punch clearing, hydrotest and re-instatement at site
Manage and lead final mechanical completion inspections and punch closing
Supervise the Pre-Com activities to ensure safety and the quality of the completed work

Asset Integrity Engineer - Pressure Equipment

One of our clients, a major oil and gas company has tasked us with identifying a...

Location

Canada , Fort McMurray

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Professional Engineer (P.Eng.) designation with APEGA is mandatory
Approximately 10–20 years of engineering experience, aligned to an intermediate level
Direct experience working within a refinery environment is required
Strong background in pressure equipment integrity and inspection practices
Experience with non-destructive testing (NDT) methods is required
prior hands-on inspection experience is a strong asset
Solid understanding of applicable codes and standards related to pressure equipment
Excellent communication skills, both written and verbal
Demonstrated leadership experience is a significant asset
Proficiency in Microsoft Excel and data analysis

Job Responsibility

Support the asset integrity program for pressure equipment including vessels, piping systems, and related infrastructure
Review inspection data, assess damage mechanisms, and recommend mitigation or repair strategies
Coordinate and support non-destructive testing (NDT) activities and inspection planning
Conduct field assessments and provide engineering support during inspections and maintenance activities
Ensure compliance with applicable regulatory and industry standards
Contribute to risk-based inspection (RBI) processes and ongoing integrity management planning
Collaborate with operations, maintenance, and inspection teams to drive safe and reliable performance
Prepare integrity-related documentation, technical reports, and asset condition assessments
Utilize Excel and internal systems for tracking, analysis, and reporting

Fulltime

Senior QAQC Inspector - Advance NDT

To interpret the suitability of products and processes against the designated sp...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
CSWIP 3.1 certification and NDT Certificate in ECT, preferred
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods

Job Responsibility

Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance
Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities
Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records
Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images
Engaging contractors and applicable third-party organizations with a professional approach and maintain a good working level relationship
Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point
Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented
Ensure NDE traceability of inspected welds and components
Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification

Fulltime

Qa/qc Engineer (Civil)

Airswift is seeking for a QA/QC Engineer (Civil) to work in Qatar with a major O...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s Degree (B.Sc.) in Civil Engineering
CSWIP 3.2
AWS Certified Welding Inspector (CWI)
BGAS-CSWIP Grade 1
NACE Level II (Minimum 2 years post-certification experience required)
NDT Level II certification in Radiographic Testing (RT) and Ultrasonic Testing (UT)
Certified QMS Lead Auditor in accordance with ISO 9001:2015 (Minimum 2 years post-certification experience required)
Minimum 15 years of experience in QA/QC roles within the oil and gas industry
Proven experience as QA/QC Engineer or Client Representative, leading multi discipline inspection teams
Strong experience in offshore projects, including offshore platforms and subsea pipelines

Job Responsibility

Ensuring full compliance with project specifications, international standards, and client requirements
Leading multi-discipline inspection teams
Overseeing quality assurance activities across fabrication, construction, and offshore installation phases

Select Country

Engineer - NDT

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Engineer - NDT

NDT Engineer

Field Engineer - Welding Inspector (NDT)

NDT Level III Technician/ Engineer

Area Construction Superintendent

Construction Supervisor (Piping)

Asset Integrity Engineer - Pressure Equipment

Senior QAQC Inspector - Advance NDT

Qa/qc Engineer (Civil)

Our AI answers in your language