Engineer - Injection Mold Job at Randstad (Viramgam)

Apu Process Engineer - Automation

The APU Process Engineer position is responsible for maximizing effectiveness by...

Location

United States , Buffalo Grove, Illinois

Salary:

80000.00 - 120000.00 USD / Year

Nemera

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering preferred
5+ years of experience, preffered experience in Manufacturing with vision systems, assembly automation equipment
Experience with Plastic Injection Molding and high speed automation equipment preferred
Strong math, reading, and communication skills required
Computer skills, including Microsoft Office applications required
Ability to lift 50 lbs, and stand/walk up to 90% of shift
Able to bend, stoop, reach, push, pull, grab and climb as needed

Job Responsibility

Develops competencies of the production unit through internal and external training and development as needed
Define and update standard operating procedures (SOP) for production employees
Assess and trains setters
Reports outcomes to the APU Shift leader
Support APU Shift leader and managers in analyzing shop floor issues and point of escalation
Propose technical solutions to improve production processes and identifies opportunities to reduce cost, lead-time, and inventory
Analyze equipment’s performance indicators, define and facilitate corrective actions implementation (e.g.: CAPA)
Know, apply, and facilitate implementation of rules defined as part of Continuous Improvement of the plant and its team (5S, TPM, SMED, VSM, etc)
Facilitate workgroups linked to continuous improvement and propose action plans
Accountable of APU equipment’s improvement

Fulltime

Process Engineering Technician

Nemera is a world leader in the design, development, and manufacturing of drug d...

Location

United States , Buffalo Grove

Salary:

Not provided

Nemera

Expiration Date

Until further notice

Requirements

Minimum of 3 years performing tasks as Operator Technician III or equivalent title (pull/set molds, load processes and start/stop presses)
Skills in troubleshooting loading equipment, dryers and other equipment
Forklift driving certification
Able to frequently lift up to 40 lbs.
Ability to push and pull items
Ability to stand and/or walk up constantly during the shift
Ability to climb up and down ladders

Job Responsibility

Support the development of new injection molds by participating in process validation activities
Perform the set-up and removal of injection molding systems
Perform the duties associated with cleaning the material blending, drying and loading systems
Perform line clearance activities per Nemera guidelines
Participate in the optimization activities for injection molding process and robust process window development based on sound process engineering principles
Perform all tasks associated with LRP folder activities
Properly execute BMS activities involving loading and closing sample orders
Ensure that sample runs are performed according to Sample Request (SR) requirements
Perform and document OQ and PQ activities as assigned
Identify system safety hazards and work with site EH&S representatives to remediate appropriately (ex. warning labels, guarding, training, etc.)

Fulltime

Process Technician for Plastics and Rubber Engineering

Apprenticeship as a Process Technician for Plastics and Rubber Engineering. Dual...

Location

Germany , Landau a. d. Isar

Salary:

Not provided

DRÄXLMAIER Group

Expiration Date

Until further notice

Requirements

good manual dexterity
good in math
interested in chemistry and physics

Job Responsibility

work with the most modern injection molding equipment
learn specific properties of materials and suitable handling and processing methods
check the quality of the finished products
clean, maintain, and build production equipment

What we offer

secure employment
mobility allowance covering distance from residence to training location
free accommodation in student dormitory for block teaching period
flexible work hours
excursions, sports groups, and celebrations
voluntary stay abroad at worldwide locations

Injection Molding Engineer

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Greer

Salary:

Not provided

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

BS or MS Degree in Mechanical Engineering, Plastics Engineering or equivalent
Minimum 4–5 years of experience in injection molding process engineering within automotive or para-automotive industry
Strong hands-on experience in injection molding machine parameter setting and process optimization
Deep knowledge of thermoplastic resins: PP, PPGF (glass fiber reinforced polypropylene), ABS, ABS-PC
Strong understanding of rheology studies and material behavior during injection
Experience with multiple injection molding machine brands
Good knowledge of tooling validation, tuning loops and factory tool transfer
Advanced competencies in Excel, Word, PowerPoint and design software/viewers
Good level of English
Strong interface capability between tooling suppliers, factory teams, quality and project teams

Job Responsibility

Ensure injection tool and process tuning from tool study validation until customer product quality approval
Act as main technical contact with toolmakers throughout the project lifecycle (post M4 milestone)
Participate in injection tool concept validation and injection system definition
Lead and organize Trial Preparation Meetings
Manage injection tool trials and tuning loops to achieve defined targets
Ensure cycle time and scrap performance are achieved vs PRU commitment
Define and follow up TCRD, FAC list and action plans
Update and manage department databases (raw material, shrinkage, trial evaluation, etc.)
Ensure injection process reliability during factory tool transfer
Coordinate with purchasing team to bring technical added value during tooling sourcing

Process Engineer

Submit your resume in MS Word format. If you know of someone who may be interest...

Location

Canada , Whitby

Salary:

95000.00 CAD / Year

Trans-United Consultants Ltd.

Expiration Date

Until further notice

Requirements

Degree or Diploma in Engineering (Mechanical or Manufacturing Engineering preferred but will consider others)
3 yrs+ experience as a Process / Product Engineer
Good knowledge of injection molding processes, ideally in an automotive Tier 1 or 2 environment - hands-on injection mold machine knowledge / able to process a new tool - hands-on experience in processing new molds, including the knowledge of what adjustments to make and how to make them if there are issues with the parts coming off the press - should also be capable of setting up molds when required - experience with injection machines with 750 Ton+ capacity
Decisive with leadership qualities
Able to interact with others and support / mentor
Ability to clearly communicate and train employees on process standards
Computer literate (MS Office, Outlook)

Job Responsibility

Play a key role in leading process development and overseeing daily injection molding operations
Be instrumental in the successful launch of new molds
Establish robust and efficient processes, supporting accurate quoting and driving continuous improvement across the company’s molding operations
Injection Molding Process Development - Establish, document, and optimize molding process parameters (temperature, pressure, cycle time) for new and existing tools - Conduct DOE and scientific molding studies to enhance quality, reduce scrap, and improve efficiency - Lead first-off and validation runs for new molds
support PPAP and capability studies in collaboration with Quality - Troubleshoot process issues such as warpage, short shots, and inconsistent cycle times to ensure stable production
Tooling & Mold Review - Determine machine tonnage, clamp force, and shot size requirements for each part / tool at quotation stage - Collaborate with tooling vendors and internal stakeholders to ensure new tools meet company standards and project timelines
Supervision & Technical Leadership - Supervise and mentor injection molding technicians, set-up staff across all shifts - Ensure process consistency, adherence to standard work, and proper documentation - Develop and deliver technical training programs to improve team competency and troubleshooting skills

Fulltime

New

Associate Manager, Global Molds Engineering

As the Associate Manager for Global Molds Engineering, you will provide Plastic ...

Location

United States , Racine

Salary:

Not provided

SC Johnson

Expiration Date

Until further notice

Requirements

Bachelor of Science Degree in Mechanical / Manufacturing Engineering
5+ years’ experience in relevant Engineering, Supply Chain or Manufacturing role and 3-5 years’ experience with injection molding technologies
Qualified candidates must be legally authorized to work in the United States.

Job Responsibility

Lead and support multiple global mold projects by collaborating with mold makers, procurement, RD&E, and processing experts, while driving Design for Manufacturability (DFM) for all plastic component programs
Manage project tasks using SCJ processes, contribute to process improvements, and provide engineering leadership through design reviews, mold design consultations, and adherence to SCJ Mold Design and Construction Standards
Evaluate and engage mold builders, assess their capabilities and participate in site visits
Investigate innovation for mold technologies such as stack molds, collapsing cores, and hot runner systems—for potential application
Oversee Mold Engineering Knowledge Transfer Documents, analyze 3D CAD models for moldability and procurement needs, and coordinate 3D data exchange between product and mold designers
Support project planning by contributing to timelines, milestones, risk mitigation, and execution strategies, including ramp‑up plans aligned with capacity requirements
Participate in Design and Process FMEAs, troubleshoot deviations through trade‑off and escalation discussions, and advise on mold refurbishment, rebuilds, spares, and lifecycle management
Build strong relationships with stakeholders, ensuring expectations align with project objectives.

What we offer

Total compensation packages at or above industry levels
bonuses
long-term incentives
matching 401(k) contributions
profit sharing
subsidized health care plans
maternity/paternity/adoption leave
flexible work arrangements
vacation purchase options
recreation and fitness centers

Fulltime

Molding Engineer I

The incumbent will report to the Director of Molding & Extrusion, responsible fo...

Location

United States , Alpharetta

Salary:

Not provided

Avanos

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering or equivalent combination of education and experience.

Job Responsibility

Learn and Conduct on the press scientific molding studies consisting of: Mold balance studies, rheology studies, gate freeze studies, cool time studies, pack pressure studies etc.
DOE’s for melt and mold temp, packing pressure and cooling time
Machine linearity studies
Dynamic check ring studies
Learn and conduct with senior engineering guidance
Gage design, design reviews MSA
First Article inspection
Injection mold design review
Data analysis
Process troubleshooting-mold and press

What we offer

generous 401(k) employer match of 100% of each pretax dollar you contribute on the first 4% and 50% of the next 2% of pay contributed with immediate vesting
benefits on day 1
free onsite gym
onsite cafeteria
HQ region voted 'best place to live' by USA Today
uncapped sales commissions

Fulltime

Senior Materials Engineer

Our fast-growing Network Cable and Connectivity business unit is seeking a talen...

Location

United States , Shakopee

Salary:

102800.00 - 133600.00 USD / Year

CommScope

Expiration Date

Until further notice

Requirements

B.S. in Polymer Engineering or Materials Science
Three or more years of experience with selecting and qualifying resins for injected molded components
Experience with polymer additive technology (antioxidants, stabilizers, pigments, dyes, etc.) for polyolefins, engineering polymers and other resin systems
Polymer melt processing experiences such as extrusion, injection molding or other molding processes

Job Responsibility

Collaborate with product design engineers and product managers to develop material specifications tailored to product requirements
Work closely with the manufacturing and purchasing organizations to execute material substitution, replacement and cost reduction projects
Coordinate and supervise validation testing of materials for a variety of broadband network applications and operating environments
Provide expert advice and consultation on material selection to product design engineers and sophisticated development teams
Develop sophisticated materials solutions for broadband interconnect product designs
Read, interpret and apply relevant industry standards and test methodologies

What we offer

Medical, dental, and vision plans
Life and accidental death insurance
A 401(k) plan
Participation in the Company’s Incentive Plan
Eleven paid holidays in a full calendar year
Two weeks of paid vacation (prorated based on start date)
Other leave options

Fulltime

Select Country

Engineer - Injection Mold

Job Responsibility

Requirements

What we offer

Looking for more opportunities?