Engineer I, NPI (Test Engineer) Job at CommScope (Shakopee)

Engineer I, NPI

The NPI Engineer I is an entry-level engineering role responsible for supporting...

Location

United States , Shakopee

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Bachelors in related curriculum such as Engineering
Basic understanding of manufacturing processes and New Product Introduction workflows
Experience with precision measurement equipment and test methods
Basic troubleshooting skills for hardware, software, and process-related issues
Basic knowledge of manufacturing processes and test integration
Basic troubleshooting of test software and application logic
Strong written and verbal communication skills to explain technical concepts clearly
Ability to work collaboratively with global, cross-functional teams
Willingness to learn and develop deeper expertise in optical test technologies
Familiarity with Excel, including data analysis

Job Responsibility

Support development and implementation of optical test processes for new products during NPI phases
Assist with precision fiber optical connector geometry testing to verify alignment, positional accuracy, and mechanical-to-optical interfaces
Support optical polarity testing to ensure correct fiber routing, orientation, and signal integrity
Execute optical performance tests under supervision, documenting results and identifying anomalies
Execute machine and test software validation activities, including test correlation, GR&R, and repeatability studies
Assist in defining test requirements and acceptance criteria based on product specifications
Support debugging optical test equipment, fixtures, software, and interfaces during prototype, pilot, and ramp phases
Work closely with Test Development and Software teams to resolve issues related to hardware, firmware, or application logic
Provide on-site and remote support to global production sites focused on optical test operations
Assist with test station deployment and transition from development to production

Fulltime

Senior NPI Test Engineer

The primary objective of this role is to support manufacturing from a test and a...

Location

United States , Bozeman

Salary:

135000.00 - 216000.00 USD / Year

Aurora Innovation

Expiration Date

Until further notice

Requirements

B.S. in Computer Science, Electrical Engineering, Mechanical Engineering, a related field, or equivalent combination of education and experience
Experience in data collection with electronic test equipment and data-acquisition systems
Prior verification, validation, and testing experience with emphasis on debugging skills
Excellent written and verbal communication of test status and results, including writing formal test reports/records
Experience in manufacturing test development and sustaining efforts at scale
Ability to read design drawings/wiring schematics
Excellent analytical abilities, technical writing ability, and a comprehensive understanding of problem-solving
Experience programming in Python is required
Experience with Linux operating systems
Experience with Google Suite, JIRA, JAMA, and GIT

Job Responsibility

Support and debug software tools used in manufacturing tests and provisioning
Closely collaborate with manufacturing and engineering teams to harden and optimize automated manufacturing test procedures
Data management and analysis to track production test performance metrics, prioritize top issues, and drive continuous improvement activities with cross-functional teams
Provides technical test support to all local manufacturing areas, locations, and customers as needed

What we offer

annual bonus
equity compensation
benefits

Fulltime

Engineer I, NPI

Location

India , Verna, Goa

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Bachelor’s in related curriculum such as Electrical or Electronics or ETC Engineering/Mechanical Engineering with 4-5 years of experience
Diploma with specialization Electronics & Communications or Mechanical Engineering or Electrical & Electronics Engineering with 7-8 years of experience
Should have basic knowledge on how to read and understand the manufacturing drawings
Should have fiber cable and fiber termination knowledge
Should know 7QC tools, FMEA and control plan
Basic skills on AUTOCAD/Solid works is preferred
Skill – Ability to effectively interact with personnel of various levels and disciplines. Ability to regularly contact, influence and negotiate with both internal and external individuals on complex issue
Strong technical skills, attention to detail, and an enthusiasm for hands-on learning

Job Responsibility

Responsible for NPI (New Product Introduction) projects evaluation and execution at the site
Collaborate with cross-functional teams to develop and improve new products
Participate in the design, prototyping, and testing of new products
Work with Global Engineering team on product transfers and product development projects
Responsible for designing the required tools/fixtures
Responsible to define the manufacturing process flow for new products
Responsible to handover to the new projects to Operations with required deliverables

NPI Test Process Development Engineer

Teradyne's Semiconductor Test Division develops the world's leading equipment fo...

Location

United States , Agoura Hills

Salary:

98300.00 - 157300.00 USD / Year

Teradyne

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Engineering (Manufacturing, Mechanical or Electronics preferred)
5+ years in printed circuit board assembly testing
Proficiency with In-Circuit Test development on platforms such as Teradyne Test Station or equivalent
Experience with ICT Fixture development and fabrication process
Proficient in measurement techniques and process controls for yield analysis, statistics CP/CPK and normal distributions a plus
Experience with PC layout/design review software (Cadence Allegro, Valor)
EMS/CM supplier collaboration desirable
Experience with scripting language (Perl, Python, etc.), Visual Basic / C# .NET is a plus
Able to travel ~10%
periodic calls with Asian teams and suppliers

Job Responsibility

Integrate with Hardware Development groups from across the company to develop structural test strategies for printed circuit boards at each quality gate in production including flying probe test and in-circuit test platforms
Collaborate with various functional skills (SW/HW/Pilot Lines/Operations/etc.) in overall printed circuit board, higher level assembly and system level test development planning and execution
Influence the printed circuit board component selection, schematic and physical layout processes to ensure project objectives are met in the overall product quality, validation and testing strategy
Drive the contract manufacturing process for Flying Probe and ICT development including fixture and program development quotes, schedules, documentation, validation and release to production
Innovate methods and means of improving quality gate processes, efficiencies and best practices

What we offer

Medical, dental, vision
Flexible Spending Accounts
Retirement savings plans
Life and disability insurance
Paid vacation & holidays
Tuition assistance programs

Fulltime

Npi Test Process Development Engineer

Teradyne’s Semiconductor Test Division develops the world’s leading equipment fo...

Location

United States , North Reading; Agoura Hills; Deer Park

Salary:

76600.00 - 122500.00 USD / Year

Teradyne

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering (Manufacturing, Mechanical or Electronics preferred)
2+ years in printed circuit board assembly testing
Proficiency with In-Circuit Test development on platforms such as Teradyne Test Station or equivalent
Experience with ICT Fixture development and fabrication process
Proficient in measurement techniques and process controls for yield analysis, statistics CP/CPK and normal distributions a plus
Experience with PC layout/design review software (Cadence Allegro, Valor)
Experience with scripting language (Perl, Python, etc.), Visual Basic / C# .NET is a plus
Able to travel ~10%
periodic calls with Asian teams and suppliers
local to position location

Job Responsibility

Integrate with Hardware Development groups from across the company to develop structural test strategies for printed circuit boards at each quality gate in production including flying probe test and in-circuit test platforms
Collaborate with various functional skills (SW/HW/Pilot Lines/Operations/etc.) in overall printed circuit board, higher level assembly and system level test development planning and execution
Influence the printed circuit board component selection, schematic and physical layout processes to ensure project objectives are met in the overall product quality, validation and testing strategy
Drive the contract manufacturing process for Flying Probe and ICT development including fixture and program development quotes, schedules, documentation, validation and release to production
Innovate methods and means of improving quality gate processes, efficiencies and best practices

What we offer

medical
dental
vision
Flexible Spending Accounts
retirement savings plans
life and disability insurance
paid vacation & holidays
tuition assistance programs

Fulltime

NPI Test Process Development Engineer

Join an NPI‑focused team, building innovative test processes and automation for ...

Location

Costa Rica , Alajuela

Salary:

Not provided

Teradyne

Expiration Date

Until further notice

Requirements

B.S. in Electrical Engineering, Electronics engineering OR related field
English Proficient
2 years of experience in: Process/Test/NPI or closely related industry
Hands‑on with lab/instrumentation is a plus
Reading and interpreting schematics, datasheets
troubleshoot to component level
Scripting for automation (Python/Perl
C#/VB.NET a plus)
Reporting tools (e.g Power BI)
Familiarity with Statistical Methods, structured problem‑solving (FMEA/8D), and FA/RCCA support

Job Responsibility

Design & implement test strategies from module to system level aligned with manufacturing flows
Collaborate across SW/HW/Pilot Line/Operations teams to validate and transfer into Pilot through HVM
Develop automated test solutions (Python/Perl/C#/VB.NET) and basic data pipelines (SQL/Power BI) to monitor yield/CPK, drive Failure Analysis (FA) /Root Cause Corrective Action (RCCA) and shorten detection/diagnosis cycles
Evaluate prototypes and finished units for functionality and conformance
perform bring‑up, integration, and debug
Contribute to standards: fixtures, calibration strategies, documentation, and best practices
Support transfers by training pilot/production teams and providing on‑site support during ramps
This role will require traveling to US and Asia

What we offer

Teradyne offers a variety of robust health and well-being benefit programs, including medical, dental, vision, life insurance, paid vacation & holidays, tuition assistance programs, and more

Test Engineer – Validation

Love working close to hardware? Join our eShepherd team as a Test Engineer and h...

Location

New Zealand , Hamilton

Salary:

Not provided

Gallagher Group

Expiration Date

July 10, 2026

Requirements

Experience in hardware testing, embedded firmware validation, or mechatronics (not purely software QA)
Familiarity with MCU-based systems (such as ESP32, STM32, Renesas, Arduino)
Working knowledge of C#/C++ and /or Python in embedded or test environments
Experience using lab tools (oscilloscopes, multimeters, soldering tools)
Ability to troubleshoot issues across hardware and firmware
Exposure to manufacturing or production testing / NPI environments
Practical, hands-on problem solver who enjoys working close to hardware
Strong collaboration skills across engineering and production teams
Confluence and Jira documentation experience

Job Responsibility

Validate embedded hardware and firmware to ensure they perform as intended
Validate embedded hardware and firmware performance across the product lifecycle
Work closely with firmware engineers to test and troubleshoot device behaviour on real hardware
Use lab equipment such as oscilloscopes, multimeters, and debugging tools to investigate issues
Support development of test approaches for embedded systems running on microcontrollers
Design and execute test cases to verify firmware features
Contribute to manufacturing test setup and help refine production test processes and SOPs
Work with production and NPI teams to improve reliability and scalability of testing in manufacturing
Help ensure products are robust, reliable, and ready for real-world deployment

What we offer

Competitive salary + performance incentives
The best of both worlds - startup energy backed by Gallagher’s global scale
Real career growth as we scale products globally
Modern tools, tech, and equipment to do your best work
A practical, collaborative engineering team that gets things done
KiwiSaver contributions
Boost App + staff discounts across NZ
Life & Disability Insurance for added peace of mind
Hamilton site perks: free parking, subsidised café, great local eateries nearby
Employee Assistance Programme + wellbeing support

Fulltime

!

Senior Staff Engineer, NPI

Senior Engineer, Global NPI, provides technical leadership and execution oversig...

Location

United States , Shakopee

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Bachelor's Degree in related curriculum such as Engineering with 8-10 years of work experience in relevant or related field
Proficient in FBC, SAP, Lean Six Sigma, SharePoint

Job Responsibility

Lead all phases of New Product Introduction (NPI), from concept through production launch
Define manufacturing strategies to ensure scalability, yield, and cost targets are achieved
Ensure alignment between product design and manufacturing through advanced DFM guidance
Drives technical leadership in optical test, interferometry, and continuity verification
develops and implements advanced processes leveraging emerging technologies and external partners, ensuring scalable deployment across sites without compromising quality or customer performance
Leads functional business analysis for Fiber Barcode (FBC) systems
defines software requirements and strategy to ensure product compliance, drives development activities, and validates system performance for robustness and reliability
Provides direction across all NPI phases, ensuring execution aligns with PDP requirements, procedures, and regulatory standards
coordinates with R&D and PLM on schedules, resources, and capital planning while driving process capability, yield, and cost performance through PFMEA, VSM, and throughput analysis
Specifies and leads implementation of automation equipment for fiber manufacturing systems, including concept, design, build coordination (internal and external), validation, and operator readiness

Fulltime

Select Country

Engineer I, NPI (Test Engineer)

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?