Engineer, Equipment Engineering Job at Sandisk (Batu Kawan, Penang)

Senior Engineer, Equipment Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor of Engineering (Hons) in Electrical / Electronics/ Mechanical / Mechatronic
3+ years of experience in test equipment engineering, specifically in SSD manufacturing or a related industry, with a strong emphasis on sustaining and maintenance
Proven track record of maintaining high slot-on availability and first pass yield in a high-volume production environment
Experience in utilizing data analytics for equipment monitoring, troubleshooting, and maintenance optimization
Expertise in maintaining and troubleshooting SSD test equipment, with a deep understanding of calibration, reliability, and maintenance protocols
Proficiency in data analysis tools (e.g., Python, R, SQL, MATLAB) for monitoring and optimizing equipment performance
Strong knowledge of predictive maintenance techniques, including AI-driven approaches to equipment reliability
Familiarity with SPC, DOE, and Six Sigma methodologies for continuous improvement
Strong leadership skills with the ability to mentor and guide junior engineers and technicians
Excellent problem-solving and decision-making abilities, with a focus on data-driven solutions

Job Responsibility

Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield
Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability
Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime
Use data analytics to monitor test equipment performance, identify patterns, and anticipate potential issues before they impact production
Analyze test equipment data to improve test efficiency, reduce down times, and enhance tester performance
Implement real-time monitoring and diagnostic tools to ensure sustained optimal performance of test equipment
Analyze equipment performance data to optimize maintenance schedules and extend the life cycle of test equipment
Lead continuous improvement projects focused on sustaining and enhancing the efficiency and reliability of test equipment
Lead and mentor a team of engineers and technicians in sustaining tester, sharing best practices for maintenance and troubleshooting
Work closely with production, quality, and other cross-functional teams to ensure seamless operation and continuous improvement in testing

Fulltime

Mechanical Engineer - Equipment Management

Mechanical Engineer position focusing on equipment management process including ...

Location

Democratic Republic of Congo , Port of Banana

Salary:

Not provided

Mota Engil

Expiration Date

Until further notice

Requirements

Degree in Mechanical Engineering
Minimum of 8 years' professional experience in equipment management and maintenance
Proficiency in Microsoft Office and SAP tools
Fluency in French (required)
Leadership and Conflict Management
Rigour and Reliability
Initiative and Proactivity
Willingness to relocate internationally

Job Responsibility

Ensure all activities that contribute to the effective functioning of the equipment management process, particularly in terms of workshop organisation, technical assistance, resource management, documentation, and cost control

Fulltime

Equipment Engineer

We are seeking a proactive, technically‑driven Equipment Engineer who will lead ...

Location

United States , Millbury

Salary:

Not provided

Formlabs GmbH

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical, Electrical, Manufacturing, or Chemical Engineering (or related field)
Minimum of 3 years of experience in manufacturing engineering, equipment design, or process improvement in a high‑volume production environment
Demonstrated experience with manufacturing equipment (mechanical systems, drives, pumps, automation equipment) and line improvement initiatives
Hands‑on and willing to do what it takes to hit the project deadline
Excellent communication and collaboration skills - comfortable working cross‑functionally with operations, maintenance, R&D, and external vendors
Experience in batch based production operations
Use 3D CAD (Solidworks/Onshape) to design components, produce drawings, and build assemblies
Are hands-on and willing to cross discipline boundaries to solve a problem

Job Responsibility

Lead projects to evaluate, specify, install, commission, and maintain resin production equipment, automation systems, and manufacturing line modifications
Analyze current manufacturing line performance (downtime, cycle time, quality rejects, maintenance costs) and identify improvement opportunities using root‑cause analysis, data analytics, and engineering best practices
Develop and maintain equipment specifications, control schematics, and production workflow to maximize equipment uptime and life‑cycle performance
Collaborate with production, R&D, and quality teams to implement solutions seamlessly into existing operations
Establish key performance indicators (KPIs) for equipment performance (OEE, MTBF, MTTR) and deliver measurable improvements (e.g., reduced downtime, increased throughput, improved yield)
Ensure that new equipment and modifications are compliant with safety, quality, and regulatory standards
document changes and train operations/maintenance personnel
Provide technical support for unscheduled breakdowns, troubleshoot equipment failures, and drive permanent corrective actions

What we offer

Medical, Dental, Vision
3% match of yearly salary for 401(k)
EAP Program
In-office catering 3x per week
120 hours of PTO per year

Fulltime

Engineer Reliability Fixed Equipment

HF Sinclair in El Dorado, KS is seeking a Fixed Equipment Engineer. This positio...

Location

United States , El Dorado

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of eight years of progressive work experience in a specific engineering discipline and project management experience is required
Emphasis on plant or refinery engineering, fixed equipment and/or mechanical integrity is required
A minimum of a Bachelor's Degree in engineering discipline is required
Technical expert in area of specialty
Advanced ability to stay abreast of new technology developments and processes and apply knowledge analytically
Strong knowledge of Microsoft products and commonly used engineering concepts and experience with engineering software
Familiarity with standards and practices of the specific discipline
Ability to effectively communicate with others, both written and verbal communication, advanced reading and writing skills, with the ability to perform advanced mathematical calculations
Ability to operate and drive all assigned company vehicles at company standard insurance rates is essential
Valid state driver's license and proof of insurance required

Job Responsibility

Defines engineering projects by determining objectives, evaluating technical strategies, and providing plant-engineering support to assigned business unit(s)
Plans and leads engineering work by writing specifications, developing schedules and budgets, and identifying improvements to existing equipment, inspection practices, and mechanical integrity programs
Implements engineering solutions by monitoring performance, coordinating with Operations/Inspection/Maintenance, taking corrective actions, updating procedures and reports, and securing materials, supplies, and services
Completes projects by delivering final outputs, closing administrative requirements, and evaluating overall project performance, including lessons learned for future inspection, maintenance, and reliability work
Analyzes the economics of each project where appropriate
calculates ROI for proposed projects
Provides engineering documentation, mechanical integrity analysis, operating analysis, and recommendations for management
Supports mechanical integrity initiatives, including fixed equipment evaluations, repair plans, inspection scope development, and root-cause investigations
Develops and improves procedures for inspection, maintenance, and engineering tasks to enhance consistency, effectiveness, and compliance with applicable standards
Collaborates with multi-disciplinary teams (Operations, Maintenance, Inspection, Process) to prioritize and execute reliability and mechanical integrity improvements

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Engineer - Mechanical (Rotating Equip)

The Rotating Equipment Engineer is responsible for providing technical engineeri...

Location

United States , Tulsa

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of five years of progressive work experience in a specific engineering discipline
A minimum of a Bachelor's Degree in an Engineering discipline is required with a Mechanical Engineering degree preferred
Familiar with API Recommended Practices regarding Boiler and Pressure Vessel Codes
Demonstrated proficiency with ASME Section I and Section VIII, B31.1 (boiler piping) and B31.3 (process piping), API 510, 570/571, 580/581, 650/653
Familiar with quantitative risk management tools and techniques
Familiar with all common methods of NDE used in the petrochemical industry
Intermediate knowledge of commonly used engineering concepts and ability to apply this knowledge analytically
Ability to coordinate all phases of a project

Job Responsibility

Develop, manage and participate in programs, methods, systems and practices for maintaining a safe work environment
Responsible for carrying out all work activities in compliance with federal and state environmental regulations
Perform duties in adherence with company procedures, standards, and specifications
Assist production and maintenance organizations throughout the plant in troubleshooting and repairs of rotating equipment
Monitor rotating equipment and make recommendations to improve reliability and reduce cost
Develop and review general and asset specific rotating equipment repair procedures
Provide training to production, maintenance, and technical departments in the proper operation and maintenance of rotating equipment
Develop and sponsor capital and expense projects to reduce overall plant risk and maintenance costs. Provide technical support throughout design and installation of projects
Assist training departments with development and review of operating procedures for rotating equipment
Maintain rotating equipment KPI’s and review for trends in equipment repairs. Develop plans to mitigate repeat rotating equipment failures

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Principle LRU Test Equipment Development Engineer

Contribute extensive aerospace LRU test experience towards the conceptualization...

Location

United States , South Windsor

Salary:

Not provided

Bloomy

Expiration Date

Until further notice

Requirements

BS in engineering or science
electrical, systems or aerospace engineering preferred
MS a plus
15 years of experience with the specification, design, maintenance and/or use of automated testing equipment in the aerospace and defense industries, including a minimum of 10 years of LRU test development experience
Outstanding verbal and written communication and presentation skills, including the expression of requirements, systems and solutions
Strong team as well as customer orientation

Job Responsibility

Work together with BLOOMY's engineering teams to refresh and extend a growing portfolio of commercial test equipment to support evolving new Advanced Air Mobility (AAM) standards and requirements, spanning engineering, integration, certification, production as well as flightline and MRO depot testing
Contribute to key customer meetings, presentations and bid and proposal strategies
Participate in standards boards and industry events
Contribute to the development of marketing collateral, application notes, case studies, video clips, webinars, blogs, demos, and exhibits
Liaise with industry partners
Support the company's mission to provide automated test solutions for mission-critical and emerging applicactions which increase product safety, performance and reliability while reducing cost

Reliability Engineer - Manufacturing Maintenance Equipment

Founded in 1985, ATS is a company with a presence in the United States, Mexico a...

Location

United States , Fayetteville

Salary:

Not provided

Advanced Technology Products

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering (ABET accredited) or equivalent experience (ex. heavy industrial maintenance, reliability, or operations experience)
Minimum of five years of reliability experience
Demonstrates ability to perform full array of reliability tool sets
Experience in Performance of RCA
Experience & Performance with RCM & FMEA
Master Level Proficiency in Predictive Technology
Vibration I Certification
Infrared I Certification
Machine Health Monitoring Strong Proficiency
Coaching & Experience with Work Execution Management

Job Responsibility

Promotes and adheres to the ATS safety culture
Ensures compliance with regulatory requirements and ATS policies and procedures
Partners with internal/external customer for engineered solutions to improve reliability and throughput
Identifies opportunities for Capital Expenditures for equipment replacement with supervision (develops and communicates ROI)
Champions operating systems, critical elements, and best practices to enable a precision reliability culture
Knowledgeable application of common precision tools and practices
Fully understands reliability centered maintenance and deliverables (equipment specific maintenance plan -ESMP)
Actively collaborates with maintenance team on the use of predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution
Understands and performs failure mode & effects analysis
Advanced understanding of Work Execution Management (WEM) to train and mentor on gaps & improvements identified through reliability strategy session performance

Laboratory Operations Manager

We are hiring for a Laboratory Operations Manager for a state of the art £30mill...

Location

United Kingdom , Southampton

Salary:

Not provided

Beautiful Recruitment

Expiration Date

Until further notice

Requirements

Ability to commute/ work in Southampton on site Monday – Friday daily is essential
Minimum of 5 years of experience managing a Laboratory as a Laboratory Manager or having worked for a Laboratory Services/ Lab FM Company as a Laboratory Operations Manager, managing onsite service engineers, maintenance engineers, maintenance technicians of equipment in a regulated laboratory, pharmaceutical or similar environment
You will have been a Laboratory Manager, Laboratory Equipment Service Manager, Laboratory Engineering Operations Manager, Life Science Facilities Manager or equivalent with responsibility for a team of Laboratory Equipment Service Engineers, Calibration Engineers, Service Technicians or Calibration Engineers reporting into you where you have to co-ordinate the scheduling of PPM works to customer satisfaction and manage the team successfully
Bachelor’s degree in a related field (e.g. Quality, Business, Engineering, Chemistry or equivalent)
Proven Experience In Analytical Equipment Service/Laboratory Asset Maintenance/ Manufacturing or Laboratory Equipment Engineering Operations Management With Strong Leadership Skills
Strong team development, performance management and employee engagement skills to motivate the team and drive performance excellence
Knowledge of working to GLP on a pharmaceutical, biotech, analytical chemistry, or medical device/similar R&D site
Experience with SAP or other similar CRM systems and good working knowledge of Excel
Ability to work to budgets and ensure that the laboratory equipment maintenance is brought in on budget
Ability to lead change management programs and drive operational innovation tailored to the Southampton site

Job Responsibility

Lead a diverse team of laboratory equipment service engineers, laboratory equipment calibration technicians, helpdesk and technical staff at the Southampton site, fostering a collaborative and high-performance work environment
Deliver lab equipment service engineering support through the site based engineering team reporting directly in to you
Manage third party service agreements and host vendor service engineers on site to undertake warranty maintenance to lab equipment
Drive operational control through metrics and KPI management, including customer satisfaction and service delivery performance
Be customer facing, working with the site based customer’s Laboratory Managers to deliver excellent engineering services on site
Inspire and develop team performance through recruitment, coaching, mentoring, and recognition, ensuring a skilled workforce at the Southampton site
Utilise SAP and other CRM tools for asset management and operational efficiency
Implement and manage continuous improvement initiatives and innovation projects focused on enhancing the efficiency and effectiveness of Southampton site operations

What we offer

excellent salary and benefits

Fulltime

Engineer, Equipment Engineering

Sandisk

Location:
Malaysia , Batu Kawan, Penang

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineer, Equipment Engineering

Senior Engineer, Equipment Engineering

Mechanical Engineer - Equipment Management

Equipment Engineer

Engineer Reliability Fixed Equipment

Engineer - Mechanical (Rotating Equip)

Principle LRU Test Equipment Development Engineer

Reliability Engineer - Manufacturing Maintenance Equipment

Laboratory Operations Manager

Engineer, Equipment Engineering

Sandisk

Location:Malaysia , Batu Kawan, Penang

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 11, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineer, Equipment Engineering

Senior Engineer, Equipment Engineering

Mechanical Engineer - Equipment Management

Equipment Engineer

Engineer Reliability Fixed Equipment

Engineer - Mechanical (Rotating Equip)

Principle LRU Test Equipment Development Engineer

Reliability Engineer - Manufacturing Maintenance Equipment

Laboratory Operations Manager

Location:
Malaysia , Batu Kawan, Penang

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 11, 2026