Emi Test Engineer Job at DCS Corporation (Sterling Heights)

EMI Test Engineer

Location

United States , Sterling Heights

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required.
Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 5 years of experience.
Ability to obtain and maintain a DoD Secret clearance.
Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards.
Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
Understand and adhere to electrical safety requirements in an electrical/electronic laboratory.
Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units.
Experience with antenna cosite analysis and radio frequency (RF) desensitization.
Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability.

Job Responsibility

Write EMI test procedures and perform onsite testing.
Provide instruction to customer engineers to teach them how to conduct EMI testing.
Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters.
Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues.
Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule.
Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system.
Perform project management duties and create related documents to support these efforts.
Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor.
Interface daily with customers and other DoD organizations to solve problems.

Fulltime

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...

Location

United States , Sterling Heights

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
Ability to obtain and maintain a DoD Secret clearance
Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
Experience with antenna cosite analysis and radio frequency (RF) desensitization
Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability

Job Responsibility

Write EMI test procedures and perform onsite testing
Provide instruction to customer engineers to teach them how to conduct EMI testing
Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
Perform project management duties and create related documents to support these efforts
Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
Interface daily with customers and other DoD organizations to solve problems

Fulltime

EMI Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...

Location

United States , Sterling Heights

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required
Bachelor's Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
Ability to obtain and maintain a DoD Secret clearance
Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
Experience with antenna cosite analysis and radio frequency (RF) desensitization
Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability

Job Responsibility

Write EMI test procedures and perform onsite testing
Provide instruction to customer engineers to teach them how to conduct EMI testing
Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
Perform project management duties and create related documents to support these efforts
Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
Interface daily with customers and other DoD organizations to solve problems

Fulltime

Emi Test Engineer

Location

United States , Sterling Heights

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
Ability to obtain and maintain a DoD Secret clearance
Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
Experience with antenna cosite analysis and radio frequency (RF) desensitization
Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability

Job Responsibility

Provide Electromagnetic Interference (EMI) testing services to our Department of War (DoW) Research & Development customer at our customer's site
Write EMI test procedures and perform onsite testing
Provide instruction to customer engineers to teach them how to conduct EMI testing
Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
Perform project management duties and create related documents to support these efforts
Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
Interface daily with customers and other DoD organizations to solve problems

Fulltime

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...

Location

United States , Sterling Heights

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
Ability to obtain and maintain a DoD Secret clearance
Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
Experience with antenna cosite analysis and radio frequency (RF) desensitization
Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability

Job Responsibility

Write EMI test procedures and perform onsite testing
Provide instruction to customer engineers to teach them how to conduct EMI testing
Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
Perform project management duties and create related documents to support these efforts
Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
Interface daily with customers and other DoD organizations to solve problems

Fulltime

New

Compliance Associate Test Engineer - EMC/EMI

As a Compliance Associate Test Engineer – EMC/EMI, you will be responsible for e...

Location

United States , San Carlos

Salary:

72000.00 - 89000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electrical Engineering, Electronics Engineering Technology, Physics, or a related technical discipline
1–4 years of experience supporting EMC/EMI testing, electrical validation, certification testing, product compliance, or related laboratory environments
Experience operating common electronic test equipment and collecting technical test data
Familiarity with EMC fundamentals including conducted emissions, radiated emissions, immunity testing, grounding, shielding, and filtering concepts
Ability to work hands-on with prototype hardware in a laboratory environment

Job Responsibility

Execute internal EMC pre-compliance testing campaigns that identify emissions and immunity issues before formal certification testing
Maintain operational readiness of EMC laboratory equipment, fixtures, calibration records, and test infrastructure
Support rapid investigation of EMC failures through structured troubleshooting, data collection, and issue isolation
Coordinate successful external certification activities, including test planning, scheduling, sample preparation, logistics, documentation, and issue tracking
Generate accurate test reports, compliance records, and regulatory documentation to support global product certifications
Improve internal EMC testing capabilities, procedures, and workflows to reduce certification risk and accelerate product development

What we offer

Comprehensive medical, dental, and vision coverage
Generous paid time off, company holidays, and parental leave
401(k) plan with company match (100% on the first 3% of contributions, 50% on the next 2%)
Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA) options
Commuter benefits (transit and parking)
Short-term and long-term disability, and life insurance
Employee Assistance Program (EAP) for mental health, financial, and personal support
Onsite snacks and catered lunches
Equity

Fulltime

RF Test Engineer

Amentum is seeking an RF Test Engineer to join our team providing laboratory and...

Location

United States , Dahlgren

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

A Bachelor’s degree from an accredited college or university Electrical Engineering, Electronic Engineering, or Physics
Degree may be substituted with four year specialized experience using instrumentation and measurement systems required to conduct EMC, EMV, EMI, or HERO testing
using standard E3 test facilities, such as an anechoic chamber, reverberation chamber, and/or open air test site to conduct E3 tests
performing analyses and evaluations to predict and define E3 problems
and defining/designing corrective measures
Must be able to obtain and maintain Active Secret US Government Clearance
US Citizenship is required to maintain a Secret Clearance

Job Responsibility

Performing laboratory work to conduct EMC, EMV, and HERO testing at NSWCDD E3 Test Facilities including anechoic and reverberation chambers
Test Event Support will include day travel to various test sites, locally

Fulltime

Test Engineer

The Test Engineer is an experienced professional responsible for designing, impl...

Location

United States , Dothan

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

The ability to obtain, maintain and access classified information at the Secret level
Must possess appropriate level of certifications for this position as required by the contract
Strong experience with Microsoft Office software (MS Word, MS Excel, MS PowerPoint)
Experience with CAD software and MATLAB
Familiarity with MIL-STD-461 and MIL-STD-810 test procedures
Familiarity with spectrum analyzers and oscilloscopes
Bachelor's degree and zero to two (0-2) years relevant experience or equivalent combination of education/experience

Job Responsibility

Assists the lead engineer or test manager in the design, set up, and execution of MIL-STD-461 Electromagnetic Interference (EMI) lab and aircraft testing
Assists in the design and development of airborne instrumentation systems and video systems
Assists the lead engineer or test manager in design, set up, and execution of altitude, hot, cold, humidity, explosive atmosphere, rapid decompression, acceleration, drop, salt fog, sand, dust, and rain chamber testing in accordance with current military and other standards for developmental and non-developmental aeromedical equipment
Assists in writing reports suitable for publication as USAARL technical reports and/or open literature scientific papers, based on the studies conducted

What we offer

Medical
Dental
Vision
Company Life Insurance
Short-Term and Long-Term Disability Insurance
401(K) Immediate Vesting
Professional Development Assistance
Legal Aid Assistance Program
Family Planning / Fertility Assistance
Personal Time Off

Fulltime

Select Country

Emi Test Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Emi Test Engineer

EMI Test Engineer

Emi Test Engineer

EMI Test Engineer

Emi Test Engineer

Emi Test Engineer

Compliance Associate Test Engineer - EMC/EMI

RF Test Engineer

Test Engineer

Our AI answers in your language