CrawlJobs Logo

Emi Emc Systems Engineer

softworldinc.com Logo

Softworld

Location Icon

Location:
United States , Sterling Heights, MI

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

60.50 USD / Hour
Save Job
Save Icon
Apply Position

Job Description:

This Radiation Engineering role requires experience in EMI EMC Radiation and Model-Based Systems Engineering. The individual will work with design teams to integrate EMI EMC considerations into hardware and software systems, mitigating EMI risks from component to system level. Responsibilities include supporting electrical and mechanical architecture designs for EMI compliance and developing related technical documents and CDRLs for HW and SW integration to achieve desired EMI performance.

Job Responsibility:

  • Evaluate Requirements: Assess customer requirements for EMI NUC Radiation and determine vehicle compliance
  • System Architecture: Create and support the design of system architecture. Conduct EMI analyses to support design solutions and changes and document analysis reports
  • EMI Requirement Management: Support the System Engineering Department in developing the System Specification Document, including EMI requirement definition, connectivity, traceability, and validation
  • Electromagnetic Analysis: run a 3D solver to conduct electromagnetic simulation (EMS) to determine compliance with contracts or System Specification Documents
  • CDRLs: Develop and complete CDRLs for customer submission
  • Risk Mitigation: Manage end-to-end traceability of hazard mitigations for assigned systems
  • Collaboration: Work with hardware and software engineers to identify EMI NUC hazards and develop mitigation strategies
  • Peer Reviews: Conduct necessary work product peer reviews before release.
  • Document progress and issues. Prepare schedules and compose risks

Requirements:

  • Bachelor’s degree in electrical engineering or physics
  • 7-10 years of related experience
  • Proficient in EMI/EMC design concepts, analysis, and standards
  • Experience with Signal Processing: Transfer function, time-domain vs. frequency-domain analyses
  • Experience with circuit design: Transmission line, impedance control, RF equivalent circuits, filtering, surge protection, PCB
  • Radiocommunication proficiency: antenna, propagation, cosite analysis
  • Strong background with MIL-STD-461 and MIL-STD-464 or equivalent commercial (ISO, IEC) standards
  • Experience in EMI requirement derivation using MBSE methodology
  • CAMEO experience preferred
  • Skilled in implementing EMI/EMC design for system-level compliance
  • Strong technical writing skills for plans, reports, presentations, and CDRLs
  • Physical Requirements: Meets ASR Measurement requirements
  • able to work inside combat vehicles
  • Familiar with multipurpose simulation tools (e.g., MATLAB, SIMULINK, SIMSCAPE, LT/P-SPICE) and electromagnetic simulation (EMS) tools (e.g., FEKO, SIMULIA, HFSS…)
  • Self-motivated and able to work in a team environment
  • Able to work occasional overtime
  • Willing to travel for testing, meetings, and support
  • Software Skills: Proficient in Microsoft Office (Word, Excel, PowerPoint, Access, Project), work experience with MBSE tool
  • This position will require eligibility to obtain a US security clearance. (Non-US Citizens will not be eligible)

Nice to have:

  • Master’s degree in electrical engineering or physics
  • Already holds US Security Clearance
  • TEMPEST Knowledge: Familiarity with TEMPEST standards and RED/BLACK separation
  • 7+ years of EMI component and EMC system-level product development experience
  • Experience in preparing E3/EMI Data Item Description documents (DI-EMCS-8xxxx)
  • Experience with power electronics: motor technology, control, and simulation
  • Experience with wireless communications: terrestrial, satellite, cellular
  • Experience with navigation and positioning: GPS, lidar, radar, camera
  • Experience with technology megatrend: Artificial Intelligence and Machine Learning
  • iNARTE Electromagnetic Compatibility certification
  • Experience designing Nuclear Event Detector circuits
  • Ability to train and mentor junior engineers
What we offer:
  • PTO
  • paid holidays
  • voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability
  • access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account
  • earn paid sick leave under the applicable state or local plan

Additional Information:

Job Posted:
March 21, 2026

Work Type:
On-site work
Icon
Softworld - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Emi Emc Systems Engineer

Electromagnetic Compatibility Engineer

The goal of an Electromagnetic Compatibility (EMC) Engineer at AMS is to solve c...
Location
Location
United States , Knoxville
Salary
Salary:
Not provided
ams-corp.com Logo
Analysis and Measurement Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Holds a bachelor’s degree from an accredited institution, preferably in engineering, physics, or a closely related technical discipline.
  • Brings 3 to 7 years of EMC engineering, test engineering, or related technical experience (preferred).
  • Possesses relevant background in one or more of the following areas: test lab operations, systems integration, aerospace, automotive, or military equipment development.
  • Demonstrates familiarity with EMC testing standards and methods (e.g., MIL-STD-461, IEC 61000 series), common test equipment (oscilloscopes, spectrum analyzers, VNAs, EMI receivers), and associated test documentation practices.
  • Holds (or is willing to pursue) an iNARTE certification or equivalent EMC technical certification
  • preferred but not required.
  • Shows a strong desire to learn new standards, tools, and testing methods, and takes initiative to master them independently.
  • Brings a problem-solving mindset with the ability to think critically and work effectively in ambiguous engineering situations that require sound judgment beyond standard procedures.
  • Demonstrates excellent attention to detail, particularly in technical documentation, test planning, and report writing.
  • Communicates professionally with strong customer-service orientation, able to explain technical concepts clearly to internal teams and external clients.
Job Responsibility
Job Responsibility
  • Develop and execute EMC/EMI test plans for customer equipment, following established procedures while adapting methods to the specifics of each system under test.
  • Perform a wide range of EMC qualification tests in the lab (e.g., emissions, immunity, surge, ESD, RF susceptibility) using diverse test equipment and software, and document results accurately.
  • Draft and refine technical reports and related documentation with close attention to detail, ensuring clarity, accuracy, and consistency with applicable standards and customer requirements.
  • Support troubleshooting and problem resolution for systems that do not initially meet EMC criteria, working with internal teams and customers to identify root causes and recommend practical fixes.
  • Participate in on-site work at customer facilities or nuclear plants as needed, which may include emissions surveys, in-plant measurements, field troubleshooting, or on-site qualification testing.
What we offer
What we offer
  • Health Coverage – Generous employer contributions toward comprehensive health, dental, vision, life, and disability insurance
  • Retirement – 401(k) with generous employer matching contributions
  • Paid Time Off – Four weeks annual vacation plus at least 10 paid holidays per year
  • Professional Development – AMS is committed to your growth as a technical specialist
  • mentorship by senior engineers and PhDs, access to professional conferences, and continuing education opportunities in nuclear engineering and advanced analysis
  • Career Growth – Annual salary reviews, raises, and advancement opportunities within a fast-paced, team-oriented, mission-driven organization
  • Fulltime
Read More
Arrow Right

PhD Student Next Generation EMI Filter

We bring the future into series production. Our department for 'Development of E...
Location
Location
Germany , Kassel; Gaimersheim
Salary
Salary:
Not provided
https://www.volkswagen-group.com Logo
Volkswagen AG
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Good to very good university degree qualifying for doctoral studies in Computer Science, Mechatronics, Electrical Engineering, or a related field
  • Strong interest and knowledge in virtual development methods and tools
  • Solid experience with neural network models, including supervised learning and reinforcement learning
  • Experience with simulation tools like LTspice, MATLAB
  • Familiarity with CAD design tools and mechanical modeling
  • German or English language level B2
Job Responsibility
Job Responsibility
  • Creating a requirements catalog for parametric CAD models of individual Pulse Inverter (PWR) components and their interfaces
  • Developing corresponding models, methods, and processes
  • Validating the developed models
  • Optimizing and automating the developed processes
  • Collaborating with the development team, particularly with the simulation team and design engineers
What we offer
What we offer
  • Attractive salary & 30 vacation days (+ 24.12. and 31.12. off)
  • 35-hour week, flexible working hours, remote work
  • Special conditions for the purchase and leasing of vehicles
  • Free seminars on scientific work and interdisciplinary qualifications
  • Participation in the doctoral network for scientific exchange with science representatives and other doctoral candidates within the Volkswagen Group
  • Fulltime
Read More
Arrow Right

Electrical Lead, Power Architecture

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
163200.00 - 204000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master’s degree in Electrical Engineering, Power Electronics, or a related discipline
  • 7+ years of experience in power system design for EV, aerospace, or similar high-reliability applications
  • Strong background in: HV inverter and converter design (400V–1000V+)
  • LV system architecture and power distribution
  • Integration of motors, generators and control systems
  • Proficiency in system simulation, schematic capture, and hardware validation
  • Experience with wide-bandgap devices (SiC, GaN) and modern digital control platforms (MCUs, DSPs, FPGAs)
  • Systems-level thinking and multidisciplinary collaboration
  • Strong technical communication and documentation skills
  • Ability to lead cross-functional efforts and mentor junior engineers
Job Responsibility
Job Responsibility
  • Lead the design and architecture of HV propulsion inverter and generator systems, including semiconductor topology, switching control, EMI, and thermal performance
  • Architect the LV electrical system, including DC/DC converters, power distribution, auxiliary loads, grounding, and redundancy
  • Contribute to architecture definition, trade studies and help manage system-level electrical requirements and interfaces across HV and LV domains
  • Collaborate closely with battery, motor, avionics, software, and thermal teams to ensure integrated, reliable system design
  • Drive component selection, supplier evaluation, and validation planning for power electronics and distribution systems
  • Oversee simulation, modeling, and analysis activities (e.g., MATLAB/Simulink, PLECS, SPICE) for system behavior, loss estimation, and transient response
  • Develop and execute validation strategies, including module bring-up, EMC compliance, thermal testing, and integrated testing
  • Support functional safety analysis and documentation (e.g., ISO 26262, DO-160, ARP4754, DFMEA)
  • Maintain technical documentation and lead design reviews across project milestones
  • Fulltime
Read More
Arrow Right

Electrical Engineer

The Aptiv Connection Systems Team is looking for an Electrical Engineer to join ...
Location
Location
United States , Troy; Warren
Salary
Salary:
Not provided
aptiv.com Logo
Aptiv plc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Electrical Engineering
  • Previous experience with embedded microcontroller design
  • 1 - 4 years relevant electronics design experience and can demonstrate abilities
  • 1 - 4 years' experience with analog/digital design and simulation experience
  • including, but not limited to: power supplies, filters, op-amps, vehicle communications (CAN & LIN), microprocessors, memory interfaces, high speed communications (I2C, SPI, UART, etc.)
  • Demonstrated knowledge of proper design methods to optimize for RFI, EMI and ESD to be compliant with automotive specifications
  • Experience with design validation and test planning
  • Previous experience with simulation and schematic capture tools
  • Previous experience using bench equipment including oscilloscopes, power supplies, DMMs, spectrum analyzers, logic analyzers, etc.
  • Demonstrated proficiency using Microsoft Office (i.e. Word, Project, Excel, Outlook, Teams, Visio, etc.)
Job Responsibility
Job Responsibility
  • Work directly with automotive OEMs and other Tier 1 suppliers to design products that meet customer functional, EMC and electrical requirements
  • Develop product schematics using schematic capture software and oversee and/or create PCB layouts
  • Complete peer reviews and create change documentation for engineering changes
  • Develop new circuit building blocks and evaluate new components
  • Work with supply chain management to provide cost analysis of Bill of Material (BoM) and component cost tradeoffs
  • Negotiate design validation plan with the customer and manage its execution at test labs
  • Conduct detailed benchmarking, competitive and cost-tradeoff analysis for area of responsibility
  • Perform simulations, worst case circuit analysis, FMEAs, and similar systematic design analysis to verify robust performance
  • Perform bench level debugging, testing and prototyping
  • Provide risk assessment and perform root cause analysis of product performance deviations using standard practices (fault tree analysis, fishbone diagrams, 5-why, etc)
What we offer
What we offer
  • Private health care effective day 1 of employment
  • Life and accident insurance
  • Paid Time Off (Holidays, Vacation, Designated time off, Parental leave)
  • Relocation assistance may be available
  • Learning and development opportunities
  • Discount programs with various manufacturers and retailers
  • Recognition for innovation and excellence
  • Opportunities to give back to the community
  • Tuition Reimbursement
  • Adoption Assistance
  • Fulltime
Read More
Arrow Right

Electrical Engineer

The Aptiv Connection Systems Team is looking for an Electrical Engineer to join ...
Location
Location
United States , Troy, MI or Champion, OH
Salary
Salary:
Not provided
aptiv.com Logo
Aptiv plc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Electrical Engineering
  • Previous experience with embedded microcontroller design
  • 1 - 4 years relevant electronics design experience and can demonstrate abilities
  • 1 - 4 years' experience with analog/digital design and simulation experience
  • including, but not limited to: power supplies, filters, op-amps, vehicle communications (CAN & LIN), microprocessors, memory interfaces, high speed communications (I2C, SPI, UART, etc.)
  • Demonstrated knowledge of proper design methods to optimize for RFI, EMI and ESD to be compliant with automotive specifications
  • Experience with design validation and test planning
  • Previous experience with simulation and schematic capture tools
  • Previous experience using bench equipment including oscilloscopes, power supplies, DMMs, spectrum analyzers, logic analyzers, etc.
  • Demonstrated proficiency using Microsoft Office (i.e. Word, Project, Excel, Outlook, Teams, Visio, etc.)
Job Responsibility
Job Responsibility
  • Work directly with automotive OEMs and other Tier 1 suppliers to design products that meet customer functional, EMC and electrical requirements
  • Develop product schematics using schematic capture software and oversee and/or create PCB layouts
  • Complete peer reviews and create change documentation for engineering changes
  • Develop new circuit building blocks and evaluate new components
  • Work with supply chain management to provide cost analysis of Bill of Material (BoM) and component cost tradeoffs
  • Negotiate design validation plan with the customer and manage its execution at test labs
  • Conduct detailed benchmarking, competitive and cost-tradeoff analysis for area of responsibility
  • Perform simulations, worst case circuit analysis, FMEAs, and similar systematic design analysis to verify robust performance
  • Perform bench level debugging, testing and prototyping
  • Provide risk assessment and perform root cause analysis of product performance deviations using standard practices (fault tree analysis, fishbone diagrams, 5-why, etc)
What we offer
What we offer
  • Private health care effective day 1 of employment
  • Life and accident insurance
  • Paid Time Off (Holidays, Vacation, Designated time off, Parental leave)
  • Relocation assistance may be available
  • Learning and development opportunities
  • Discount programs with various manufacturers and retailers
  • Recognition for innovation and excellence
  • Opportunities to give back to the community
  • Tuition Reimbursement
  • Adoption Assistance
  • Fulltime
Read More
Arrow Right
New

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Provide Electromagnetic Interference (EMI) testing services to our Department of...
Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right

Emi Test Engineer

Location
Location
United States , Sterling Heights
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Bachelor’s Degree in Engineering (ideally electrical or RF engineering) plus at least 12 years of experience
  • Ability to obtain and maintain a DoD Secret clearance
  • Familiar with MIL-STD 461 and MIL-STD 464 or other EMC commercial/industrial standards
  • Understand how to operate RF-based instruments such as a spectrum analyzer, EMI receiver, oscilloscope, signal generator, network analyzer, etc.
  • Understand and adhere to electrical safety requirements in an electrical/electronic laboratory
  • Understand the basics of EMC (source, coupling path, receiver) and the different types of EMC problems i.e., conducted/radiated susceptibility, conducted/radiated emissions, electrostatic discharge, etc.
  • Understand basic units used in EMC e.g., dB, dBµV/m, dBµA, dBΩ, etc. and be able to work in these units
  • Experience with antenna cosite analysis and radio frequency (RF) desensitization
  • Expertise in electromagnetic Interference (EMI), electromagnetic compatibility (EMC), Electrical Environmental Effects (E3) and spectrum supportability
Job Responsibility
Job Responsibility
  • Provide Electromagnetic Interference (EMI) testing services to our Department of War (DoW) Research & Development customer at our customer's site
  • Write EMI test procedures and perform onsite testing
  • Provide instruction to customer engineers to teach them how to conduct EMI testing
  • Review technical documents (ICDs, Mechanical drawings, requirements, performance specifications, test plans and test reports) and provide feedback to our customers related to EMI/EMC matters
  • Identify EMI/EMC risks and issues and provide recommended resolutions to our customers for those risks and issues
  • Develop and/or provide input to plans of execution to include scope, budget, resource needs, material needs and schedule
  • Perform requirements analysis and provide input to the design, implementation, test and installation of electrical and electromechanical subsystems onto combat vehicle system
  • Perform project management duties and create related documents to support these efforts
  • Develop and review engineering and contractual Scopes of Work (SOWs) for prime contractor
  • Interface daily with customers and other DoD organizations to solve problems
  • Fulltime
Read More
Arrow Right