CrawlJobs Logo
Synapse - Manufacturing Logo Synapse - Manufacturing · IT - Software Development

Electronics Manufacturing Test Engineer

United States, Greenville · Job Posted May 27, 2026
Apply Position
Job Link Share

Job Description

As an Electronics Manufacturing Test Engineer, you will play a pivotal role in ensuring the efficiency and quality of our electronic manufacturing processes. Leveraging your expertise in electronics engineering and product development, you will lead the design and implementation of robust test solutions for electronic circuit board production while adhering to Design for Manufacturability and Assembly (DFMA) principles, Lean methodologies, and ISO 9001:2015 standards.

Job Responsibility

  • Develop and implement comprehensive test strategies and procedures for electronic assemblies, with a focus on DFMA principles to optimize manufacturing processes and enhance product quality
  • Collaborate cross-functionally with Design Engineering, Manufacturing, and Quality Assurance teams to seamlessly integrate test solutions into the production environment, ensuring alignment with ISO 9001:2015 standards
  • Utilize Lean methodologies to identify and eliminate waste, reduce cycle times, and improve overall manufacturing efficiency
  • Design, optimize, and maintain test fixtures, equipment, and automation systems to facilitate accurate and efficient testing of Printed Circuit Board Assemblies (PCBAs) and electronic systems
  • Conduct detailed analysis of test data and failure modes, identifying root causes and implementing corrective actions to drive continuous improvement initiatives
  • Stay abreast of industry trends and advancements in test technologies, recommending innovative solutions to enhance product quality and manufacturing efficiency
  • Review circuit board designs for testability requirements
  • Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment

Requirements

  • BS or MS degree in Electronics or Electrical Engineering or related field
  • Strong interpersonal, analytical, organizational and follow-up skills
  • Strong communication skills (verbal and written)
  • Excellent time management skills with a proven ability to meet deadlines
  • Excellent attention to detail
  • Solid knowledge in electronics, mechanics and software development
  • Analytical thinking and application of problem solving strategies
  • Ability to define problems, collect data, establish facts, and draw valid conclusions
  • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
  • 3+ years of experience in electronic product development & volume manufacturing
  • 3+ years of experience as a Test Engineer
  • 3+ Years experience in C# code development
  • In-depth understanding of SMT board level testing or system-in-package testing
  • Proficiency in ISO 9001:2015 standards and maintaining certification
  • Strong leadership and management skills, with the ability to inspire and motivate teams
  • Excellent communication, analytical, and problem-solving skills
  • Experience with domestic and/or international consumer electronics vendors and supply chain management
  • Knowledge of Lean methodologies and their application in manufacturing environments
  • Familiarity with test automation and frameworks to enable comprehensive test coverage

Nice to have

  • Certification in Lean Six Sigma or equivalent process improvement methodologies
  • Experience managing international quality system rules and regulations, including planning and implementation
  • Proven track record of successfully managing detailed test coverages and improving test efficiency in engineering and production phases
Synapse - Manufacturing - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Electronics Manufacturing Test Engineer

8 matching positions

Senior Electronics Engineer / Electronics Engineer

Our Product Lifecycle Engineering (PLE) team is responsible for sustaining and e...
Location
Location
Australia , Sydney
Salary
Salary:
Not provided
resmed.com Logo
ResMed
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electronics Engineering or equivalent
  • Extensive knowledge of electronic components and design technologies
  • Experience in a product development environment creating high-quality, volume products
  • Primary responsibility for the successful integration/development of a complex electronics board-level design and transferred it into production
  • Ability to provide technical leadership to a team
  • Effective and frequent communicator with team members, peers, managers and external stakeholders
  • Proven experience in supplier engagement, from evaluation and selection through to ongoing collaboration and quality assurance
Job Responsibility
Job Responsibility
  • Technical leadership of electronics designs in accordance with business priorities, including specification and development of new products
  • Optimisation of analysis, review, testing, certification and documentation of new electronic designs
  • Ensure new electronic designs are successfully transitioned to prototype and volume production at electronics contract manufacturers
  • Coordination of technical problem solving activities including root cause analysis, solution design and validation
  • Anticipation of challenges faced by the team, and proactive implementation of measures to address project risks
  • Engagement of team members across the organisation to ensure working methods/processes are robust and optimised
  • Coaching and mentoring of engineers within the group as a subject matter expert
  • Identification of opportunities for improvement of skills and knowledge across the team, and support of others to achieve organisational goals
  • May include liaising and managing outsourced product development
  • Fulltime
Read More
Arrow Right

Electronics Test Engineer

This is an exciting opportunity to join an organisation at the cutting edge of e...
Location
Location
United Kingdom , County Durham
Salary
Salary:
45000.00 GBP / Year
zenovo.co.uk Logo
Zenovo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Electrical and Electronic Engineering (BEng) or equivalent qualification/experience
  • 1-2 years' experience in an electronics or manufacturing test engineering role
  • Strong LabVIEW programming skills plus experience with C# and Arduino platforms
  • Experience working with SQL databases for test data collection and analysis
  • Excellent fault-finding and troubleshooting skills for both test equipment and electronic products
  • Effective verbal and written communication skills
Job Responsibility
Job Responsibility
  • Develop and test plans for new electronic products
  • Produce test specifications aligned with customer requirements and internal standards
  • Design, build, and validate new test equipment and fixtures for manufacturing
  • Maintain and improve existing test equipment to ensure accuracy, reliability, and efficiency
  • Manage version control for compiled firmware files and support programming fixtures
  • Provide technical support and troubleshooting to production teams
  • Guide and support Electronics Technicians
  • Verify and validate test equipment and fixtures in line with industry standards
  • Keep accurate documentation and records per quality systems and clearly communicate test results
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Test Engineer

The Manufacturing Test Engineering team at Block is responsible for making sure ...
Location
Location
Singapore , Singapore
Salary
Salary:
Not provided
block.xyz Logo
Block
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of experience in electronics manufacturing
  • Clear written and spoken English communication skills
  • Experience working in Python, Labview, or similar programming language
  • Experience in statistics, and using SQL, JMP, Matplotlib, or similar data visualization programs
  • Ability to read schematics
  • Knowledge in circuit design at the “maker” level or beyond (e.g. projects like LED controllers, home automation, weather stations, etc.)
  • Excited to work on hands-on projects and to make things work in EE, software, and/or ME realms
  • Experienced with hardware lab equipment for test, measurement (e.g. oscilloscope, power supply, DMM, etc.), and/or prototyping (Raspberry Pi, Arduino, 3D printing, powertools, etc.)
  • Enthusiastic to apply methodical engineering problem-solving skills to dig into challenges that are outside of your expertise
  • Able and willing to travel internationally 20% as needed
Job Responsibility
Job Responsibility
  • Design, build, and support board-level and product-level functional test stations, including independently debugging and resolving station issues, proactively identifying and implementing improvements, and responding quickly to factory-impacting problems
  • Serve as the Directly Responsible Individual (DRI) for test stations, owning development, deployment, and ongoing production support
  • Develop and maintain test station software by autonomously writing, reviewing, and debugging code
  • implementing robust error handling, logging, and diagnostic capabilities
  • Analyze test station data and measurements by conducting root cause analysis of test failures, clearly documenting and communicating findings, and proposing and implementing evidence-based solutions
  • Maintain effective communication with global stakeholders by providing timely updates on status, risks, and blockers
  • thoroughly documenting technical investigations
  • and proactively managing and communicating priority changes
  • Drive continuous improvement by identifying opportunities to enhance test coverage, processes, and systems
  • taking ownership of issues through resolution
What we offer
What we offer
  • Remote work
  • medical insurance
  • flexible time off
  • retirement savings plans
  • modern family planning
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Test Engineer

Microsoft Silicon, Cloud Hardware, and Infrastructure Engineering (SCHIE) is the...
Location
Location
United States , Mountain View
Salary
Salary:
119800.00 - 234700.00 USD / Year
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Doctorate in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field OR Master's Degree in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field AND 3+ years enterprise computer, consumer electronics design or hyperscale supply chain systems experience OR Bachelor's Degree in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field
  • 4+ years enterprise computer, consumer electronics design or hyperscale supply chain systems experience OR equivalent experience
  • Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud Background Check upon hire/transfer and every two years thereafter
Job Responsibility
Job Responsibility
  • Define and execute manufacturing test methodologies for building blocks (PCBA + storage enclosure) and system assemblies across ODM/SI/CM sites (NPI + sustaining)
  • Own building-block test development for ICT (In‑Circuit Test) and BFT (Board Functional Test)—coverage definition, fixture/test station readiness, and release execution for PCBAs and enclosure boards
  • Develop/validate/sustain test HW/SW/FW tools, scripts, fixtures, and procedures to meet product requirements and manufacturing constraints
  • Build and maintain stable core test content (reusable scripts/cases) and deploy to blade/rack-level stations
  • perform agile onsite debugging when needed
  • Own disciplined test-content release process (validation/regression, change control, rollback readiness) to protect factory uptime and quality
  • Provide test readiness judgment for NPI builds (HW/SW/FW), identify early risks, and drive mitigations/closure with partners
  • Monitor production yield/test data, deep-dive test issues, and drive continuous improvements to reduce escapes and improve quality
  • Drive root-cause remediation for systemic HW/FW issues found in manufacturing
  • align with reliability/qualification for coverage parity
  • Fulltime
Read More
Arrow Right

Electronics Manufacturing Engineer

This is a newly created position reporting to the Production Manager. You will b...
Location
Location
Australia , Adelaide
Salary
Salary:
Not provided
codan.com.au Logo
Codan Limited
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proven experience in an electronics manufacturing or production assembly environment
  • Advanced hands-on skills in electronic fault finding, PCB repair, and microelectronics soldering
  • Strong attention to detail and a commitment to high-quality workmanship
  • A solid understanding of manufacturing principles such as Continuous Improvement, Lean Manufacturing, and defect prevention
  • The confidence to analyse problems, influence process improvements, and support others technically on the production floor
  • Formal engineering qualifications are advantageous but not essential — practical capability, repair expertise, and manufacturing mindset are critical
Job Responsibility
Job Responsibility
  • Coordinate daily repair and rework priorities in collaboration with the Production Manager
  • Diagnose, troubleshoot, and resolve complex electronic faults using appropriate diagnostic and test equipment
  • Perform hands-on repair and rework of electronic assemblies, including PCB-level fault finding and component replacement
  • Execute high-precision soldering and rework on microelectronics, including miniature BGAs, 0201 components, and fine-pitch devices
  • Investigate manufacturing defects and failures, determine root causes, and implement robust corrective and preventative actions
  • Conduct both electronic and mechanical repairs in accordance with defined quality, safety, and workmanship standards
  • Refurbish and upgrade electronic products, including disassembly, firmware/software installation, configuration, and functional testing
  • Partner with production and quality teams to improve manufacturability, yield, and product reliability
  • Identify and contribute to continuous improvement initiatives aligned with Lean Manufacturing principles
  • Coach and mentor production technicians, lifting technical capability and reinforcing best-practice repair and rework standards
What we offer
What we offer
  • Interstate relocation assistance is available
  • Spacious, modern facility
  • Free secure onsite parking
  • Easy access via public transport
  • Onsite subsidised café
  • Recreational facilities including a gym, basketball and tennis court, as well as various game tables
  • Flexibility to meet the demands of family life
  • A child-friendly parenting room
  • A variety of staff events to connect with colleagues across the Codan Group
Read More
Arrow Right

Manufacturing Test Engineer - Display & Optical

Meta's Reality Labs organization brings together experts to develop and ship gro...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Good understanding of fundamental optical principles, color spaces, imaging systems, and the manufacturing processes for display and optical modules
  • Proven understanding of key factory measurement metrics for colorimetry, luminance, panel uniformity, mura, flicker, etc
  • Familiarity with optical alignment methods, active alignment systems, and precision motion control in a factory environment
  • BS or MS degree in Electronics Engineering, Optical Engineering or related field
  • 3+ years of experience managing test development within a high-volume consumer electronics environment
  • Understanding of fundamental considerations of building hardware in development and volume production stages. Demonstrated experience in defining, developing, and troubleshooting manufacturing test issues
  • Experience in building cross-functional relationships
  • Experienced in managing a group of vendor engineers/technicians, building a team providing swift and effective responses to technical tasks
Job Responsibility
Job Responsibility
  • Serve as the primary technical interface with X-functional teams (Engineering, Supply Chain, etc.) to drive test procedure development, implementation, and rapid issue resolution during NPI and volume manufacturing ramp
  • Development and implementation of manufacturing test strategy during development and production phases of product lifecycle. Work with Engineering and vendor test teams to design and assemble bench setups and test fixtures
  • Work with the Engineering Team to define test coverage and align test accuracy/spec for display and optical subsystems
  • Work with the Capex Team to identify the best supplier/partner to meet product requirements from both technical perspective as well as supply chain and manufacturing considerations
  • Work directly with the factory test engineers providing guidance and support as necessary in test methods, equipment, and test set-up
  • Coordination of and travel to suppliers (foreign and domestic) to establish technical and manufacturing processes required during product development and volume manufacturing ramp
Read More
Arrow Right

Manufacturing Test Engineer

Meta's AR/VR organization brings together experts to develop and ship groundbrea...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS degree in Electronics Engineering or related field
  • 3+ years of experience in consumer electronic product development & volume manufacturing
  • Experienced and in-depth understanding in SMT board level testing or system-in-package testing
  • Experienced with domestic and/or international consumer electronics vendors and supply chain
  • Understanding of fundamental considerations of building hardware in development and volume production stages
  • Experienced in managing detail test coverages and improving test efficiency in engineering and production phase
  • Experienced in test automation and test frameworks to enable comprehensive test coverage
  • Experienced in managing group of vendor engineer/technicians, building a team providing swift and effective to technical tasks
Job Responsibility
Job Responsibility
  • Development and implementation of manufacturing test strategy during development and production phases of product lifecycle. Work with Engineering and vendor test teams to design and assemble bench setups and test fixtures
  • Work with Engineering Team to identify the best supplier/partner to meet product requirements from both technical perspective as well as supply chain and manufacturing considerations
  • Develop test requirements and methodology with Engineering team, implement manufacturing tests at vendor sites, troubleshoot and solve issues during product development and manufacturing ramp
  • Interface directly with the Engineering, Supply Chain, Manufacturing, Quality, and Vendor teams to assist in the development of test procedures, including First Article, Reliability, Environmental, Production and Final Acceptance Testing
  • Work directly with the test engineers providing guidance and support as necessary in test methods, equipment, and test set-ups
  • Coordination of and travel to suppliers (foreign and domestic) to establish technical and manufacturing processes required during product development and volume manufacturing ramp
Read More
Arrow Right

Manufacturing Test Engineer

Meta Reality Lab organization brings together world-class experts to develop and...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS degree in Electronics Engineering or related field
  • 3+ years of experience in consumer electronic product development & volume manufacturing
  • Experienced and in-depth understanding in FATP testing
  • Experienced with domestic and/or international consumer electronics vendors and supply chain
  • Understanding of fundamental considerations of building hardware in development and volume production stages
  • Experienced in managing detail test coverages and improving test efficiency in engineering and production phase
  • Experienced in test automation and test frameworks to enable comprehensive test coverage
  • Experienced in managing group of vendor engineers/technicians, building a team providing swift and effective to technical tasks
Job Responsibility
Job Responsibility
  • Development and implementation of manufacturing test strategy during development and production phases of product lifecycle
  • Work with Engineering and vendor test teams to design and assemble bench setups and test fixtures
  • Work with engineering team to identify the best supplier/partner to meet product requirements from both technical perspective as well as supply chain and manufacturing considerations
  • Develop test requirements and methodology with Engineering team, implement manufacturing tests at vendor sites, troubleshoot and solve issues during product development and manufacturing ramp
  • Interface directly with the Engineering, Supply Chain, Manufacturing, Quality, and Vendor teams to assist in the development of test procedures, including First Article, Reliability, Environmental, Production and FATP Testing
  • Work directly with the test engineers providing guidance and support as necessary in test methods, equipment, and test set-ups
  • Coordination of and travel to suppliers (foreign and domestic) to establish technical and manufacturing processes required during product development and volume manufacturing ramp
Read More
Arrow Right