CrawlJobs Logo

Electronics Avionics Technician Level 3

assessfirst.com Logo

Assessfirst

Location Icon

Location:
United States , Grand Prairie

Category Icon
Category:
IT - Administration

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The Electronic Avionics Technician is responsible for diagnosing and repairing units down to the Shop Replaceable Unit (SRU) and component levels. This role requires strong expertise in using digital measurement tools, oscilloscopes, frequency generators, and circuit analysis to accurately isolate faults and perform repairs on complex electronic systems.

Job Responsibility:

  • Conduct standard testing procedures on various equipment and validate the results
  • Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
  • Disassemble, clean, and visually inspect parts to identify issues or wear
  • Reassemble parts, ensuring all measurements meet specified tolerances and requirements
  • Accurately track and document all activities, maintaining proper control of parts
  • Help maintain shop compliance with regulatory and quality standards
  • Contribute to process improvements aimed at reducing cycle time
  • Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
  • Apply maintenance manuals to evaluate and determine the acceptability of components
  • Regularly update work order information in the ERP system
  • Follow established procedures, making adjustments as necessary and promptly notifying supervisors
  • Safeguard confidential and sensitive information
  • Comply with all safety, health, and environmental regulations
  • Troubleshoot and repair electronic units down to the component level
  • Test and evaluate capacitors, diodes, transistors using a Digital Volt Meter (DVM)
  • Apply power supply theory and digital electronics principles to isolate faults
  • Trace circuit problems using appropriate tools and techniques
  • Self-train on similar product lines
  • Perform soldering on through-hole and surface mount components
  • Maintain FAA Repairman Certification
  • Fully train new technicians and team members
  • Develop creative repair solutions when original parts are unavailable
  • Maintain thorough knowledge of the unit's operation and historical fault trends

Requirements:

  • High school diploma or general education degree (GED) and three (3) years of related experience and/or training or equivalent combination of education and experience
  • 5 or more years related work experience or equivalent combination of education and experience
  • Basic level of Microsoft Suite: Outlook, Word, Excel
  • Compliance with safety rules (PPE)
  • Compliance with procedures and standards – knowledge of CMM requirements
  • Autonomy
  • Accuracy and rigor, detail-oriented
  • Ability to analyze and synthesize
  • Ability to train others
  • Time management – Responsiveness
  • Team work – Positive behavior

Nice to have:

Knowledge of 5S, Lean and Kaizen methods

Additional Information:

Job Posted:
May 16, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Assessfirst - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Electronics Avionics Technician Level 3

Electronics Avionics Technician Level 3

Job Summary: The Electronic Avionics Technician is responsible for diagnosing an...
Location
Location
United States , Grand Prairie
Salary
Salary:
Not provided
assessfirst.com Logo
Assessfirst
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or general education degree (GED) and three (3) years of related experience and/or training
  • or equivalent combination of education and experience
  • 5 or more years' related work experience or an equivalent combination of education and experience
  • Basic level of Microsoft Suite: Outlook, Word, Excel
  • Knowledge of 5S, Lean and Kaizen methods is a plus
  • Knowledge of production and repair tools and benches, instrumentation and measuring skills
  • Knowledge of FAA regulations and understanding of quality requirements
  • Compliance with safety rules (PPE – Personal Prevention Equipment)
  • Compliance with procedures and standards – knowledge of CMM requirements
  • Autonomy
Job Responsibility
Job Responsibility
  • Conduct standard testing procedures on various equipment and validate the results
  • Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
  • Disassemble, clean, and visually inspect parts to identify issues or wear
  • Reassemble parts, ensuring all measurements meet specified tolerances and requirements
  • Accurately track and document all activities, maintaining proper control of parts
  • Help maintain shop compliance with regulatory and quality standards
  • Contribute to process improvements aimed at reducing cycle time
  • Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
  • Apply maintenance manuals to evaluate and determine the acceptability of components
  • Regularly update work order information in the ERP system
  • Fulltime
Read More
Arrow Right
New

Electronics Avionics Technician Level 3

Job Summary: The Electronic Avionics Technician is responsible for diagnosing an...
Location
Location
United States , Grand Prairie
Salary
Salary:
Not provided
assessfirst.com Logo
Assessfirst
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or general education degree (GED) and three (3) years of related experience and/or training
  • or equivalent combination of education and experience
  • 5 or more years' related work experience or an equivalent combination of education and experience
  • Basic level of Microsoft Suite: Outlook, Word, Excel
  • Knowledge of 5S, Lean and Kaizen methods is a plus
  • Knowledge of production and repair tools and benches, instrumentation and measuring skills
  • Knowledge of FAA regulations and understanding of quality requirements
  • Compliance with safety rules (PPE)
  • Compliance with procedures and standards – knowledge of CMM requirements
  • Autonomy
Job Responsibility
Job Responsibility
  • Conduct standard testing procedures on various equipment and validate the results
  • Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
  • Disassemble, clean, and visually inspect parts to identify issues or wear
  • Reassemble parts, ensuring all measurements meet specified tolerances and requirements
  • Accurately track and document all activities, maintaining proper control of parts
  • Help maintain shop compliance with regulatory and quality standards
  • Contribute to process improvements aimed at reducing cycle time
  • Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
  • Apply maintenance manuals to evaluate and determine the acceptability of components
  • Regularly update work order information in the ERP system
  • Fulltime
Read More
Arrow Right

Aircraft Integration Technician

An Aircraft Integration Technician 2 is responsible for assisting with the insta...
Location
Location
United States , Tampa
Salary
Salary:
Not provided
aevex.com Logo
AEVEX Aerospace
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proficient understanding of fundamental skills such as soldering, crimping, tool use, and frame assembly
  • Proficient avionics and mechanical integration skill
  • Ability to follow guidance on tasks and work requirements
  • Ability to read and understand prints and layouts, or learn if not experienced
  • Proficient verbal and written communication skills
  • Ability to work efficiently with team members, independently, and cross-functionally
  • Ability to meet daily/weekly production goals with critical time schedules
  • High school diploma or equivalent required
  • 3-6 Years of experience in a production and/or assembly environment
  • Proven knowledge of competencies for skill level can be used in lieu of experience
Job Responsibility
Job Responsibility
  • Assist with installation and checkout of UAV electrical and electronic devices
  • Utilize hand and power tools during assembly and fabrication
  • Assist with utilizing multimeters and probes to conduct troubleshooting and diagnostics on equipment wiring
  • Assist with cable assembly and repairs
  • Provide support working on integration, fuselage/airframe, and programming portions of the UAV
  • Assist with assembling components including switches, electrical controls, and junction boxes
  • Follow work instructions and/or peer guidance on proper assembly
  • Performs other related duties as assigned
  • Regular and reliable attendance on a full time basis
  • Responsible for exhibiting professional behavior with both internal and external business associates
What we offer
What we offer
  • 401(k)-retirement plan
  • comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company
  • professional development funds
  • Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support
  • Fulltime
Read More
Arrow Right

Avionics Technician Lead, MQ-9

The MQ-9 Avionics Technician Lead is a highly qualified and skilled aircraft ele...
Location
Location
Japan , Iwakuni
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Active Secret US Government Clearance within the last 12 months
  • High School Diploma or have completed relevant military and/or vocational technical school curriculum
  • Eight (8) years of actual Aircraft Avionics and/or GCS maintenance experience required
  • Three (3) years of experience on MQ-9 Aircraft and/or GCS, as an Avionics Technician
  • Advanced knowledge of basic and complex mechanical maintenance and repair
  • Advanced knowledge of technical publications related to aircraft mechanical maintenance
  • Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
  • Know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems
  • Have been designated a CDI or Red-X inspector for MQ-9 aircraft
  • Able to inspect and operate ground support and auxiliary equipment
Job Responsibility
Job Responsibility
  • Exercise independent judgment and lead a team of avionics technicians to complete daily aircraft maintenance tasks based on priorities set by their assigned supervisor
  • Apply expert technical knowledge to solve complex problems by interpreting technical publications, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs
  • Performs all daily launch/recovery duties in support of operational requirements
  • Maintain assigned MQ-9 aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments
  • Apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents
  • Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment
  • Make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts
  • Apply advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities
  • Use common and complex test instruments in the performance of assigned duties
  • Provides training to lower-level avionic technicians
  • Fulltime
Read More
Arrow Right

Avionic Technician

Morson Edge is looking for an SMU Avionic Operator – Maintenance to support the ...
Location
Location
Saudi Arabia
Salary
Salary:
Not provided
morson.com Logo
Morson Talent
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • National Secondary Education completion
  • Level 2 Certificate in Electrical / Electronic Engineering
  • Minimum 3 years post-qualification practical maintenance experience within an operational flying aircraft environment OR successful completion of relevant apprenticeship programme
  • Completion of relevant Technician Logbook tasks/projects
  • Strong interpersonal and communication skills
  • Ability to obtain and maintain Saudi Council of Engineers (SCE) membership prior to start
Job Responsibility
Job Responsibility
  • Carry out scheduled avionic maintenance on Typhoon aircraft
  • Conduct inspections, repairs, servicing, overhaul, and testing activities
  • Perform fault diagnosis and recovery of aircraft systems
  • Complete modification embodiment activities as required
  • Ensure all work meets required quality and airworthiness standards
  • Complete maintenance records, aircraft forms, and documentation accurately
  • Maintain current authorisations for tasks undertaken
  • Highlight training needs or capability gaps to supervision
  • Complete all mandatory training within validity periods
  • Work fully in line with quality systems and technical publications
What we offer
What we offer
  • Shared accommodation
  • Flights
  • Fulltime
Read More
Arrow Right

Electronics Technician

This position, located at Eglin AFB, FL, involves applying technical knowledge t...
Location
Location
United States , Eglin AFB
Salary
Salary:
Not provided
tdxcorp.com Logo
TDX
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics – or – equivalent military training (highly desired)
  • Associate’s degree in Electronics and experience at the Craftsman level highly desirable
  • Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired - NOT DISQUALIFYING
  • Six (6) years’ experience at the journeyman level is highly desired
  • Flight line experience highly desired – NOT DISQUALIFYING
  • This job requires the physical capability to lift, maneuver, and carry ACTS pods in a variety of environments, including shop, warehouse, bay, and flight-line
  • US Citizen // Secret Clearance or ability to obtain
  • Must have a U.S. Passport and appropriate visas
  • Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit
  • Must be able to travel to other countries in support of TDY operations
Job Responsibility
Job Responsibility
  • Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
  • Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
  • Assist with Ground Station/Live Monitor/RRU maintenance as required
  • Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
  • Perform system installation, preparation for use and reshipment
  • Identify and report corrections/improvements to technical data
  • Identify and report product quality/material deficiencies
  • Identify and report supply discrepancies
  • Transport, install, and remove Pods, including ancillary equipment
  • Verify proper subsystem electro-mechanical interfaces with aircraft
What we offer
What we offer
  • health
  • dental
  • vision
  • 401K
  • Fulltime
Read More
Arrow Right
New

Electro-Mechanical Avionics Technician Level 2

The Electro-Mechanical Avionics Technician is responsible for carrying out produ...
Location
Location
United States , Grand Prairie
Salary
Salary:
Not provided
assessfirst.com Logo
Assessfirst
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or general education degree (GED) and three (3) years of related experience and/or training
  • or equivalent combination of education and experience
  • Basic level of Microsoft Suite: Outlook, Word, Excel
  • Knowledge of FAA regulations and understanding of quality requirements
  • Compliance with safety rules (PPE)
  • Compliance with procedures and standards – knowledge of CMM requirements
  • Autonomy
  • Accuracy and rigor, detail-oriented
  • Ability to analyze, to synthesize (Ability to report effectively)
  • Ability to train others
Job Responsibility
Job Responsibility
  • Conduct standard testing procedures on various equipment and validate the results
  • Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
  • Disassemble, clean, and visually inspect parts to identify issues or wear
  • Reassemble parts, ensuring all measurements meet specified tolerances and requirements
  • Accurately track and document all activities, maintaining proper control of parts
  • Help maintain shop compliance with regulatory and quality standards
  • Contribute to process improvements aimed at reducing cycle time
  • Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
  • Apply maintenance manuals to evaluate and determine the acceptability of components
  • Regularly update work order information in the ERP system
  • Fulltime
Read More
Arrow Right
New

Electro-mechanical avionics technician level 2

The Electro-Mechanical Avionics Technician is responsible for carrying out produ...
Location
Location
United States , Grand Prairie
Salary
Salary:
Not provided
assessfirst.com Logo
Assessfirst
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or general education degree (GED) and three (3) years of related experience and/or training
  • or equivalent combination of education and experience
  • 2 or more years' related work experience or an equivalent combination of education and experience
  • Basic level of Microsoft Suite: Outlook, Word, Excel
  • Knowledge of 5S, Lean and Kaizen methods is a plus
  • Knowledge of production and repair tools and benches, instrumentation and measuring skills
  • Knowledge of FAA regulations and understanding of quality requirements
  • Compliance with safety rules (PPE – Personal Prevention Equipment)
  • Compliance with procedures and standards – knowledge of CMM requirements
  • Autonomy
Job Responsibility
Job Responsibility
  • Conduct standard testing procedures on various equipment and validate the results
  • Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
  • Disassemble, clean, and visually inspect parts to identify issues or wear
  • Reassemble parts, ensuring all measurements meet specified tolerances and requirements
  • Accurately track and document all activities, maintaining proper control of parts
  • Help maintain shop compliance with regulatory and quality standards
  • Contribute to process improvements aimed at reducing cycle time
  • Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
  • Apply maintenance manuals to evaluate and determine the acceptability of components
  • Regularly update work order information in the ERP system
  • Fulltime
Read More
Arrow Right