Electronic Technician Journeyman Job at Ardagh Group (Chicago)

Electronic Technician Journeyman

The Electrician is responsible for modifying, repairing, and overhauling all typ...

Location

United States , Chicago

Salary:

44.61 USD / Hour

Ardagh Group

Expiration Date

Until further notice

Requirements

Journeyman electrician designation with at least three years industrial experience
Experience with installation, troubleshooting, repair and adjustment of industrial, electrical and electronic equipment
Experience with Allen-Bradley and/or Modicon PLCs, Controllogix5000 is a plus
Software experience with frequency drives, Yaskawa and others preferred
Working knowledge of 3 phase power circuits and ability read electrical prints
Ability to pass the Mechanical Comprehension test at 50% or higher
Strong working knowledge in safety principles
High school diploma or equivalent required

Job Responsibility

Modify, repair, and overhaul all types of electrical and electronic equipment and controls across the facility
Maintain, modify and install PLC programs
Troubleshoot and correct electrical/electronic problems on the plant floor
Install, modify, rebuild, repair or overall all types of electronic/electrical equipment and controls with an emphasis on plant operations
Remove and/or install electronic/electrical equipment and parts
Analyze and correct electrical/electronic problems
Must be familiar with electrical/electronic tools, gauges, calibration and testing equipment
Must have a working knowledge of computers, hand and power tools, pipe threader, etc
Must be familiar with motors, transformers, conduits, bus ducts, fittings, wires, cable, transistors and other electrical/electronic gauges, meters and control devices
Must be able to modify, maintain, and install PLC programs

What we offer

Success Share Bonus that is dependent upon meeting metrics and targets
Comprehensive benefits program including medical, prescription, dental and vision coverage with an opportunity to earn a medical/prescription premium reduction by completing a qualified wellness activity
401(k) Plan
Time and One Half for all hours worked past 8 hours each day
5% Night premium included for all Night shift positions

Fulltime

Maintenance Electronics Technician

Trane Technologies in Trenton, NJ is hiring a Maintenance Electronics Technician...

Location

United States , Trenton

Salary:

34.00 - 37.32 USD / Hour

Trane Technologies

Expiration Date

Until further notice

Requirements

Journeyman License/Certification preferred
or equivalent years’ experience performing complex electronics, electrical, computer, and PLC industrial maintenance
Demonstrated competency with Allen-Bradley PLC 5000, PanelView and SLC 500 equipment shown by passing Allen-Bradley skills requirement criteria
High School Diploma or GED
Proficient reading and interpreting blueprints and schematics
Ability to use electrical/electronic testing equipment to such as multi-meters, ammeters, megohm meters, high potential testers, oscilloscopes, digital probes to troubleshoot and repair equipment
Ability to troubleshoot and repair mechanical, hydraulic, pneumatic and electrical control
Ability to work overtime as needed

Job Responsibility

Responsible for helping to maintain and repair all machines and equipment in the facility
Performs all electrical repairs
Works closely with machine adjusters during repairs as well as managing the processes to ensure preventive maintenance is performed to ensure highest output of machines
Read and evaluate electrical schematics and plans to repair, maintain and install equipment
Assist employees with repairs and diagnosis of equipment problems
Responsible for general maintenance and electrical work of grounds, facilities, processes and equipment
Experience in reading and troubleshooting from blueprints & schematics with system voltages 240 and 480 three-phase system
Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high voltage switchgear, protective relaying, and related equipment
Ability to troubleshoot and repair mechanical, hydraulic, pneumatic and electrical control
Use hand and power tools related to the electrical trades

What we offer

We offer competitive compensation and comprehensive benefits and programs

Electronic Technician Radar Technician

This position, located at Eielson AFB, Alaska, provides technical knowledge to p...

Location

United States , Eielson AFB

Salary:

Not provided

TDX

Expiration Date

Until further notice

Requirements

BS Degree in a technical discipline or AS Degree in technical discipline or equivalent military training, or minimum ten (10) years’ experience at journeyman level
Associate degree in Electronics and experience at the Craftsman level highly desirable
IAT II (A+ software/hardware and Security +) Certification required
US Citizen
Top Secret Clearance or ability to obtain is required
Familiar with RF Measurements - Small signal and high-power gain, Noise Figure, S-Parameters and digital measurements (oscilloscope, DVM)
Holds recognized Electronics and electrical Qualification
Proven track record of successful radar systems maintenance
Proven practical and pragmatic understanding of service delivery
Applicants must have a valid state driver’s license

Job Responsibility

Deliver 1st/ 2nd line Preventative maintenance on the Radar Systems
Deliver 1st/ 3rd line Corrective maintenance on the Radar Systems
Responsible for quality compliance, safety, continuous improvement and confirm any other contractual obligations are met with regards to the radar systems
Maintain and review radar technical manuals
Maintain and manage all tools and test equipment required to support the system
Responsible to manage Spare equipment list and work with logistics manager
Requirement to travel to remote locations with overnights
Provide a site support to Lockheed Martin when required
There may be a requirement to backfill other radar technicians at sites on Eielson AFB
Ensure compliance with TDXi’s Quality Control and Safety Programs

What we offer

health
dental
vision
401K

Fulltime

Air Combat Training Systems Electronic Technician

This job, located at Andersen AFB, Guam, supports Air Combat Training System (AC...

Location

United States , Yigo, Guam

Salary:

30.00 - 32.00 USD / Hour

TDX

Expiration Date

Until further notice

Requirements

High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics
equivalent military training (highly desired)
Associate’s degree in Electronics and experience at the Craftsman level highly desirable
Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired
Six (6) years’ experience at the journeyman level is highly desired
Flight line experience highly desired
US Citizen
Secret Clearance or ability to obtain
Must have a U.S. Passport and appropriate visas
Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit

Job Responsibility

Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
Assist with Ground Station/Live Monitor/RRU maintenance as required
Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
Perform system installation, preparation for use and reshipment
Identify and report corrections/improvements to technical data
Identify and report product quality/material deficiencies
Identify and report supply discrepancies
Transport, install, and remove Pods, including ancillary equipment
Verify proper subsystem electro-mechanical interfaces with aircraft

What we offer

health, dental, vision and 401K

Fulltime

Air Combat Training Systems Electronic Technician

This job, located at Andersen AFB, Guam, supports Air Combat Training System (AC...

Location

United States , Yigo

Salary:

30.00 - 32.00 USD / Hour

TDX

Expiration Date

Until further notice

Requirements

High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics
equivalent military training (highly desired)
Associate’s degree in Electronics and experience at the Craftsman level highly desirable
Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired
Six (6) years’ experience at the journeyman level is highly desired
Flight line experience highly desired
US Citizen
Secret Clearance or ability to obtain
Must have a U.S. Passport and appropriate visas
Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit

Job Responsibility

Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
Assist with Ground Station/Live Monitor/RRU maintenance as required
Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
Perform system installation, preparation for use and reshipment
Identify and report corrections/improvements to technical data
Identify and report product quality/material deficiencies
Identify and report supply discrepancies
Transport, install, and remove Pods, including ancillary equipment
Verify proper subsystem electro-mechanical interfaces with aircraft

What we offer

health
dental
vision
401K

Fulltime

Electronics technician maintenance - communications

The Electronics Technician Maintenance I applies basic technical knowledge to pe...

Location

United States , Eielson AFB, Alaska

Salary:

Not provided

TDX

Expiration Date

Until further notice

Requirements

High school diploma and successful completion of accredited Technical Apprentice Program in Electronics or equivalent military training, or minimum three (3) years’ experience at journeyman level
IAT II (A+ software/hardware and Security +) Certification required
US Citizen
Secret Clearance or ability to obtain is required
Valid state driver’s license
Ability to read, analyze, and apply knowledge of both electrical and mechanical schematics
Ability to speak, read, and write English

Job Responsibility

Apply basic technical knowledge to perform simple or routine tasks following detailed instructions
Perform tasks such as replacing components, wiring circuits, repairing simple electronic equipment
Take test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes
Requires physical capability to lift, maneuver, and carry weighted objects
Operate and maintain all DENRO components and gator radio systems
Monitor/configure systems to include developing new and/or changing TED maps
Operate and maintain data lines (T1 & T3), microwave links, and fiber lines
Ensure required reports and documentation are available and properly maintained
Maintain current tower climb certification
Comply with TDXi’s Quality and Safety Programs and other duties as assigned

What we offer

Health
Dental
Vision
401K

Fulltime

Hvac technician

Location

Salary:

Not provided

Caddell Construction

Expiration Date

Until further notice

Requirements

Minimum high school diploma/GED
Journeyman certificate or equivalent
Associates degree or equivalent work experience in HVAC, electrical, or electronics
Current clearance, or the ability to obtain, a Department of Defense minimum secret security clearance required
U.S. Government Secret Security Clearance required
Ability to crawl, climb, walk, reach with hands and arms, bend, kneel, crouch, stand for longs periods of time, lift and hold in excess of 50lbs, talk, hear and occasionally sit
Ability to withstand confined spaces and or/extreme heights
Demonstrates the ability to safely work at heights
Able to analyze and evaluate problems
Able to safely operate vehicles, mechanical devices and equipment

Job Responsibility

Installs controllers and other field devices, run low voltage cable and make termination
Assists with the on-site programming, start-up and commissioning from controller to end devices
Diagnose and resolve technical problems on jobs and report to project management
Installs sheet metal products according to specifications and building codes
Programming and startup of DDC systems, day-to-day service and maintenance, diagnoses, repairs, advanced programming and commissioning of HVAC and DDC control systems
Maneuvers units into position for installation

What we offer

Eligible for medical, dental, and vision insurance
401K /Roth
Referral completion bonus
Relocation bonus

Fulltime

Maintenance Technician - 2nd shift

Location

United States , Warren

Salary:

32.26 - 32.56 USD / Hour

Nesco Resource

Expiration Date

Until further notice

Requirements

Journeyman's card or equivalent work experience
High school diploma or equivalent
Ability to pass a Maintenance Technician aptitude test
Knowledge of industrial, mechanical, and electrical codes, techniques, and standards
Familiarity with government regulations for industry and safe work practices dealing with machine repair
Strong background in mechanical, electrical, hydraulic, pneumatic, robotic arms, and overall machine troubleshooting skills
Ability to troubleshoot and repair electrical circuits and systems up to 110 volts
Familiarity with complex machinery, electrical circuits, and plant operating equipment
Should maintain a sense of urgency, self-motivation, and overall good work ethic while performing tasks in a safe manner
Skills in interpersonal relations and written and oral communications

Job Responsibility

Troubleshoot and repair machinery and equipment with minimal supervision using safe techniques and schematics
Perform electrical tasks and incidental work as needed to achieve assigned tasks
Perform electronic component replacement per familiarity and/or training
Verify equipment as functional and leave the area clean and safe
Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime
Gather and maintain a complete set of required tools, including calipers, dial indicators, electrical meters, and other diagnostic and measurement devices
Utilize diagnostic tools and techniques to define problem areas and assist with resolution
Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly
Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life
Recommend improvements and/or changes to PM systems/tasks when applicable

Fulltime

Electronic Technician Journeyman

Ardagh Group

Location:
United States , Chicago

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electronic Technician Journeyman

Electronic Technician Journeyman

Maintenance Electronics Technician

Electronic Technician Radar Technician

Air Combat Training Systems Electronic Technician

Air Combat Training Systems Electronic Technician

Electronics technician maintenance - communications

Hvac technician

Maintenance Technician - 2nd shift

Electronic Technician Journeyman

Ardagh Group

Location:United States , Chicago

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electronic Technician Journeyman

Electronic Technician Journeyman

Maintenance Electronics Technician

Electronic Technician Radar Technician

Air Combat Training Systems Electronic Technician

Air Combat Training Systems Electronic Technician

Electronics technician maintenance - communications

Hvac technician

Maintenance Technician - 2nd shift

Location:
United States , Chicago

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
March 04, 2026